tom1 Posted April 14, 2012 Author Share Posted April 14, 2012 no il check al controller no , ma empiricamente si ovvero provare tutte le porte sata a disposizione della main Quote Link to comment Share on other sites More sharing options...
ethanhunt Posted April 14, 2012 Share Posted April 14, 2012 cioè devo provare a collegare lhdd vecchio sulle altre porte sata2? quindi la mobo è da escudere? Quote Link to comment Share on other sites More sharing options...
tom1 Posted April 14, 2012 Author Share Posted April 14, 2012 direi di si proprio Quote Link to comment Share on other sites More sharing options...
ethanhunt Posted May 23, 2012 Share Posted May 23, 2012 ancora bootmgr mancante premere ctrl alt ccanc per riavviare  ho ricollegato il vecchio hdd su un'altro porta stat2 ed ripartito il sistema. A questo punto mi viene un dubbio e chiedo ad esperti: posso modificare sul bios nella sezione boot - boot option priorities - boot option #2 dove è selezionato il vecchio hdd impostare disabilities. Quote Link to comment Share on other sites More sharing options...
tom1 Posted May 23, 2012 Author Share Posted May 23, 2012 no,dovresti disabilitare il controller Quote Link to comment Share on other sites More sharing options...
ethanhunt Posted May 24, 2012 Share Posted May 24, 2012 devo disabilitare il controller dal bios? su boot option #2? perchè succede questo, all'avvio invece di far partire hdd prioritario fa partire il secondo? Quote Link to comment Share on other sites More sharing options...
tom1 Posted May 24, 2012 Author Share Posted May 24, 2012 si Quote Link to comment Share on other sites More sharing options...
ethanhunt Posted July 8, 2012 Share Posted July 8, 2012 Preblema risolto, credo. Ho sostituito il cavo sata dell'hdd nuovo, quello sostituito aveva delle contorsioni incredibili. Dalla sostituzione non ho avuto piu schermate blu. sembra tutto perfetto.  Volevo chiedere un consiglio, ho acquistato una ventola da 120mm silverstone air penetrator, lho collegato con il molex all'alimentatore, volevo chiedere si puo collegare alla scheda madre per controllorne la velocità ?ci sono tre attacchi, 12v,5v,7v ho fatto il collegamento a 12v. Credo che la rotazione sia un po debole però, considerando che è una delle migliori ventole in circolazione e che dovrebbe sparare l'aria ad un metro di distanza. Quote Link to comment Share on other sites More sharing options...
tom1 Posted July 8, 2012 Author Share Posted July 8, 2012 collegandola alla mobo ,viene gestita in automatico in base alla temp interna. Quote Link to comment Share on other sites More sharing options...
ethanhunt Posted July 9, 2012 Share Posted July 9, 2012 dove la collego alla mobo? Quote Link to comment Share on other sites More sharing options...
tom1 Posted July 9, 2012 Author Share Posted July 9, 2012 si Quote Link to comment Share on other sites More sharing options...
ethanhunt Posted July 9, 2012 Share Posted July 9, 2012 su quale connettore della mobo? Quote Link to comment Share on other sites More sharing options...
tom1 Posted July 9, 2012 Author Share Posted July 9, 2012 cpu fan Quote Link to comment Share on other sites More sharing options...
Cosmos Posted July 9, 2012 Share Posted July 9, 2012 Cpu fan oppure chassis fan 1 2 ecc Quote Link to comment Share on other sites More sharing options...
tom1 Posted July 10, 2012 Author Share Posted July 10, 2012 cpu fan perchè credo di aver capito sia del dissipatore Quote Link to comment Share on other sites More sharing options...
ethanhunt Posted July 11, 2012 Share Posted July 11, 2012 dove si trova esattamente l'attacco sulla mobo sabertooth p67? quindi devo staccare il molex della fan dall'alimentatore e collegarla con l'attacco 12v alla mobo? Quote Link to comment Share on other sites More sharing options...
tom1 Posted July 11, 2012 Author Share Posted July 11, 2012 si trova nella zona del socket Quote Link to comment Share on other sites More sharing options...
ethanhunt Posted April 22, 2013 Share Posted April 22, 2013 Ragazzi ho cambiato memorie e ho installato due moduli da 4gb corsair vengeance 1600mhz cl9, ora il probelma è che tramite cpu z mi da dram frequency 668.9mhz che *2(dual) sono solo 1337mhz. Dal bios è impostato tutto su auto, è possibile portare le memorie a 1600? ricordo che ho una sabertooth p67, core i7 2600k 3.4ghz(è vero che supporta frequenza ram fino a 1333mhz mentre i nuovi ivi bridge 1600?) Quote Link to comment Share on other sites More sharing options...
Tex Posted April 22, 2013 Share Posted April 22, 2013 vai tranquillo, entra nel bios e settale su xmp, o casomai le seti tu manualmente a 1600mhz! Quote Link to comment Share on other sites More sharing options...
palanzana Posted August 11, 2015 Share Posted August 11, 2015 Salve a tutti, ho un problema con questa mobo e le ram hyperX savage 2x8gb. Da quando ho provato ha sostuire le vecchie corsair il pc non boota e non si vede il post  ho provato anche a fare il reset tramite jumper (impossibile farlo tramite batteria), ma rimane sempre accesso il led rosso della cpu  avete soluzioni? Quote Link to comment Share on other sites More sharing options...
tom1 Posted August 12, 2015 Author Share Posted August 12, 2015 ciao passa a presentarti qui http://www.xtremehardware.com/forum/forumdisplay.php?f=46 Quote Link to comment Share on other sites More sharing options...
tom1 Posted August 12, 2015 Author Share Posted August 12, 2015 controllato i pin del socket. Controllato di aver messo le ram negli slot giusti. Ti da un QCODE o solo accende spegne. Quote Link to comment Share on other sites More sharing options...
palanzana Posted August 12, 2015 Share Posted August 12, 2015 controllato i pin del socket. Controllato di aver messo le ram negli slot giusti. Ti da un QCODE o solo accende spegne.  il socket non l'ho controllato, ma escludo si sia mosso il processore:AAAAH: (anche se rimane sempre acceso il cpu-led)  le ram sono state provate in tutti gli slot non vedo nessuno QCODE e lo speaker non segnala niente di anomalo   unico dubbio: la p67 supporta ram fino a 1866 e i settaggi nel bios erano in overlock (non ricordo vcore delle ram), le savage fury arrivano fino a 2400 e non vorrei che fossero partite a quella frequenza e abbiamo fritto qualcosa (ho sentito puzza di bruciato, ma forse è stata la suggestione) Quote Link to comment Share on other sites More sharing options...
tom1 Posted August 12, 2015 Author Share Posted August 12, 2015 a friggere non friggono nulla. Ma se hai detto di aver fatto un clear cmos non è possibile che sia bootate in XMP. Quote Link to comment Share on other sites More sharing options...
palanzana Posted August 12, 2015 Share Posted August 12, 2015 a friggere non friggono nulla. Ma se hai detto di aver fatto un clear cmos non è possibile che sia bootate in XMP.  il clearmos l'ho fatto dopo che no partiva il pc..quindi le nuove ram hanno girato con i settaggi delle vecchie corsair 1600 Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.