delly Posted August 12, 2010 Share Posted August 12, 2010 Ottimo!Alla fine sono usciti!:clapclap: eh si...alla fine ce l'hanno fatta...:asd: Quote Link to comment Share on other sites More sharing options...
delly Posted August 12, 2010 Share Posted August 12, 2010 Nuovo "Afterburner 2.0.0 Beta 6"! Novità: Voltage control layer has been seriously revamped to give additional freedom to extreme overclockers with new custom design MSI graphics cards. Now MSI Afterburner is able to control up to 3 voltages on custom design MSI Fermi and other future custom design MSI graphics cards. New adjustable voltages include memory voltage and special multi-purpose auxiliary voltage feeding either memory bus (also known as VDDCI on AMD graphics cards) or PCIE bus and crystal (PEXVDD on NVIDIA graphics cards) Added core, memory and auxiliary PEXVDD voltage control for custom design MSI N480GTX Lighning series graphics cards with uP6225+uP6262 voltage regulators Added core, memory and auxiliary PEXVDD voltage control for custom design MSI N470GTX Twin Frozr II OV3 series graphics cards with uP6218+uP6262 voltage regulators Added core, memory and auxiliary PEXVDD voltage control for custom design MSI MSI N460GTX Hawk series graphics cards with uP6262 voltage regulators Added core voltage control for custom design MSI N460GTX Cyclone series graphics cards Added auxiliary VDDCI voltage control for reference design AMD RADEON HD 5870 series graphics cards Added fan tachometer monitoring for NVIDIA graphics cards. Please take a note that not all graphics cards are tachometer reading capable. So depending on graphics card and cooling system fan tachometer monitoring can be unavailable Optimized NVIDIA driver-level clock frequency monitoring codepath Minimum clock limits for all graphics cards have been reduced from 75% to 50% Dynamic overclocking, voltage and fan speed limits. MSI Afterburner no longer uses static slider limits calibration and adjusts the limits dynamically when some external factors affect it (e.g. Overdrive clock limits on AMD cards or VGA BIOS fan speed and voltage limits on NVIDIA GeForce GTX 400 cards) New temperature hysteresis settings for software automatic fan control mode gives you additional way to improve cooling system thermal and acoustic parameters Now fan speed limits (i.e. minimum and maximum fan speeds accepted by VGA BIOS and display driver) are displayed in custom fan speed curve editor window Built-in skin sizes have been reduced due to optimized internal skin panels representation and optimized compiled bitmap cache Optional skin compression ability in the built-in skin compiler. Skin format reference documentation has been updated to document new compression options Minor built-in skins appearance tweaks Now MSI Afterburner uses previously undocumented power user oriented startup mode via the task scheduler under Windows Vista / Windows 7. MSI Afterburner launch no longer requires UAC confirmation at Windows startup. Please take a note that Microsoft Visual C++ 2008 runtime libraries must be installed to get new startup mode working Now MSI Afterburner automatically fixes startup link if or is enabled but the registry or task scheduler startup entry is missing Startup profile is now displayed in option floating tooltip instead of the main window Now power users can enable optional DirectInput based hotkeys handler via the configuration file. DirectInput based hotkeys processing can seriously reduce hotkey response time in the applications heavily loading CPU (mostly 3D games) and leaving not enough time for processing standard keyboard input message queues. Please take a note that enabling such sophisticated hotkeys handling mode can cause some system security applications (e.g. pro-active application behavior analysis module of KIS) to warn you about possible keylogging threat Improved skin engine, now skinned controls support horizontal and/or vertical centering. Skin format reference guide has been updated to document these new alignment modes MSI On-Screen Display server has been upgraded to version 3.7.2. New version gives you the following improvements:- Now screen capture events are identified visually by text message flashing in On-Screen Display during 0.25s- Built-in skin sizes have been reduced due to optimized compiled bitmap cache- Added On-Screen Display profile for Startcraft II : Wings of Liberty- Added configuration file switch allowing sending MSI Afterburner to system tray instead of closing on button click option is no longer set in the startup task settings to allow automatically starting application via the task scheduler on laptops or on some UPS models Added Korean localizatio Download: download from Guru3D.com molto bene...finalmente ora si può mettere mano anche al voltaggio delle mem con le 5870 reference... Quote Link to comment Share on other sites More sharing options...
[ITA]Nemesis89 Posted August 13, 2010 Share Posted August 13, 2010 NUOVE ATI Stream SDK 2.2 con supporto OpenCL 1.1: What’s New in v2.2 Support for OpenCL™ 1.1 specification.3 Please see the OpenCL™ 1.1 specification for more information about this feature. [*]Support for Ubuntu® 10.04 and Red Hat® Enterprise Linux® 5.5. [*]Support for X86 CPUs with SSE2.x or later (Adds to existing support for X86 CPUs with SSE3.x or later). [*]Support for Microsoft® Visual Studio® 2010 Professional Edition and Minimalist GNU for Windows (MinGW) [GCC 4.4]. [*] Support for GNU Compiler Collection (GCC) 4.1 or later on Linux® systems (Adds to existing support for GCC 4.3 or later). [*]Support for single-channel OpenCL™ image format.3 [*]Support for OpenCL™ / DirectX® 10 interoperability. Please see this Khronos OpenCL™ extension registry entry for more information about this extension. [*]Support for additional double-precision floating point routines in OpenCL™ C kernels. Please see chapter A, section 9 of the ATI Stream SDK OpenCL™ Programming Guide for more information about the additional routines added in this release. [*]Support for generating and loading binary OpenCL™ kernels. Please see this knowledge base article for more information about this feature. [*]Support for native OpenCL™ kernels.4 [*]Preview Feature: Support for accessing additional physical memory on the GPU from OpenCL™ applications. 3,7 Please see this knowledge base article for more information about this feature. [*]Preview Feature: Support for printf() in OpenCL™ C kernels. Please see chapter A, section 8 of the ATI Stream SDK OpenCL™ Programming Guide for more information about this extension. [*]Extension: Support for additional event states when registering event callbacks in OpenCL™ 1.1. Please see chapter A, section 8 of the ATI Stream SDK OpenCL™ Programming Guide for more information about this extension. [*]Additional OpenCL™ samples: ConstantBandwidth (under cl/MicroBenchmarks) GlobalMemoryBandwidth (under cl/MicroBenchmarks) ImageBandwidth (under cl/MicroBenchmarks) LDSBandwidth (under cl/MicroBenchmarks) MemoryOptimizations PCIeBandwidth (under cl/MicroBenchmarks) SimpleDX10 SimpleMultiDevice [*]Package Update: ATI Stream Profiler 1.4. [*]Various OpenCL™ compiler and runtime fixes and enhancements (see developer release notes for more details). [*]Expanded OpenCL™ performance optimization guidelines in the ATI Stream SDK OpenCL™ Programming Guide, including: Global memory optimizations LDS optimizations Register and LDS impact on number of active wavefronts Load-balancing across multiple OpenCL™ devices Instruction bandwidths Key cache sizes and bandwidths for "Evergreen" GPUs LINK DOWNLOAD Questi i catalyst che al momento offrono il supporto alle OpenCL 1.1: http://www.xtremehardware.com/forum/228319-post2155.html scusate a cosa servirebbero questi driver? vanno sovrascritti a i 10.7 che ho?? thx Quote Link to comment Share on other sites More sharing options...
Slime Posted August 13, 2010 Share Posted August 13, 2010 ATI Stream è come CUDA di Nvidia. Sono tecnologie che servono ad accellerare alcune applicazioni, opportunamente predisposte, con la gpu della scheda video, lavorando insieme alla cpu del computer. Quindi installandole andranno ad integrarsi alle 10.7 e non a sostituirsi. Quote Link to comment Share on other sites More sharing options...
dj883u2 Posted August 13, 2010 Author Share Posted August 13, 2010 ATI Stream è come CUDA di Nvidia. Sono tecnologie che servono ad accellerare alcune applicazioni, opportunamente predisposte, con la gpu della scheda video, lavorando insieme alla cpu del computer. Quindi installandole andranno ad integrarsi alle 10.7 e non a sostituirsi. Esattamente. Ed aggiungo di usarli con questi driver: http://www.xtremehardware.com/forum/228319-post2155.html Quote Link to comment Share on other sites More sharing options...
delly Posted August 13, 2010 Share Posted August 13, 2010 Esattamente.Ed aggiungo di usarli con questi driver: http://www.xtremehardware.com/forum/228319-post2155.html già...per ora sono gli unici che hanno il supporto OpenCL 1.1... Quote Link to comment Share on other sites More sharing options...
[ITA]Nemesis89 Posted August 13, 2010 Share Posted August 13, 2010 ok grazie Quote Link to comment Share on other sites More sharing options...
niubbo Posted August 14, 2010 Share Posted August 14, 2010 Nemesis89;229988']ok grazie ciao,vedendo le 2 5970 appaiate su r2e,volevo chiederti che temperature raggiungi ingame,perche' io fui costretto al cambio mobo per tenerle distanziate ,onde evitare l'overheat a 105° dopo appena un minuto di Unigine tu hau risolto con qualche stratagemma? Quote Link to comment Share on other sites More sharing options...
delly Posted August 14, 2010 Share Posted August 14, 2010 ciao,vedendo le 2 5970 appaiate su r2e,volevo chiederti che temperature raggiungi ingame,perche' io fui costretto al cambio mobo per tenerle distanziate ,onde evitare l'overheat a 105° dopo appena un minuto di Unigine tu hau risolto con qualche stratagemma? ce ne son pochi di stratagemmi... o le liquidi, o cambi mobo per avere i 16x/16x negli slot distanti, oppure te ne freghi, e visto che non cambia niente, le metti cmq negli slot distanti e vai 16x/8x... io le avrei spostate tranquillamente se la mia DFI non avava già di suo i 16x/16x negli slot lontani... Quote Link to comment Share on other sites More sharing options...
[ITA]Nemesis89 Posted August 14, 2010 Share Posted August 14, 2010 ciao,vedendo le 2 5970 appaiate su r2e,volevo chiederti che temperature raggiungi ingame,perche' io fui costretto al cambio mobo per tenerle distanziate ,onde evitare l'overheat a 105° dopo appena un minuto di Unigine tu hau risolto con qualche stratagemma? allora con sto caldo e impossibile tenere tute e 4 le gpu attivate, anche con ventola impostata al 100%..... la prima vga arriva in un attimo 90 gradi infatti quando arriva a 90 gradi levo tutto... quando gioco disattivo AI cosi viaggio solo con una gpu, tanto i giochi per ora vanno bene anche con 14 di gpu,a settembre ordino la RIII e metto la prima vga nel primo slot e la seconda nel terzo cosi vanno tutte e 2 a 16x il massimo di banda consigliato per queste vga... e finalmente le sfruto a dovere.. ho detto al mio amico che mi ha fatto il pc di spostarmela allo slot bianco piu sotto ma ha detto ke e meglio di no perche sono fatte per andare a 16x quindi possono dare problemi :cheazz: Quote Link to comment Share on other sites More sharing options...
delly Posted August 14, 2010 Share Posted August 14, 2010 Nemesis89;230219']ho detto al mio amico che mi ha fatto il pc di spostarmela allo slot bianco piu sotto ma ha detto ke e meglio di no perche sono fatte per andare a 16x quindi possono dare problemi :cheazz: di baggianate se ne sentono tante... fossi in lui cambierei mestiere... Quote Link to comment Share on other sites More sharing options...
Project Zero Posted August 14, 2010 Share Posted August 14, 2010 Nemesis89;230219']allora con sto caldo e impossibile tenere tute e 4 le gpu attivate' date=' anche con ventola impostata al 100%..... la prima vga arriva in un attimo 90 gradi infatti quando arriva a 90 gradi levo tutto... quando gioco disattivo AI cosi viaggio solo con una gpu, tanto i giochi per ora vanno bene anche con 14 di gpu,a settembre ordino la RIII e metto la prima vga nel primo slot e la seconda nel terzo cosi vanno tutte e 2 a 16x il massimo di banda consigliato per queste vga... e finalmente le sfruto a dovere..[b'] ho detto al mio amico che mi ha fatto il pc di spostarmela allo slot bianco piu sotto ma ha detto ke e meglio di no perche sono fatte per andare a 16x quindi possono dare problemi [/b]:cheazz: Nessun problema, secondo me te lo ha fatto gratis e non aveva voglia, e ha trovato una scusa :cheazz::clapclap: Expansion Slots 3 x PCIe 2.0 x16 support at x16, x8, x8, or dual x16 speed 2 x PCIe 2.0 x1 ( the PCIEx1_1 (black) is compatible with audio slot) 1 x PCI 2.2 Quote Link to comment Share on other sites More sharing options...
[ITA]Nemesis89 Posted August 14, 2010 Share Posted August 14, 2010 di baggianate se ne sentono tante...fossi in lui cambierei mestiere... Quote Link to comment Share on other sites More sharing options...
Project Zero Posted August 14, 2010 Share Posted August 14, 2010 Il case che hai preso è buono ?? Antec Twelve-Hundred Quanto ti è costato ?? Quote Link to comment Share on other sites More sharing options...
[ITA]Nemesis89 Posted August 14, 2010 Share Posted August 14, 2010 Il case che hai preso è buono ?? Antec Twelve-Hundred Quanto ti è costato ?? per il case ha fatto tutto lui, l ho pagato sui 180€ penso sia buonetto anche per il costo.. Quote Link to comment Share on other sites More sharing options...
tom1 Posted August 14, 2010 Share Posted August 14, 2010 molto meglio personalmente il 690 II Quote Link to comment Share on other sites More sharing options...
niubbo Posted August 14, 2010 Share Posted August 14, 2010 di baggianate se ne sentono tante...fossi in lui cambierei mestiere... OMG asd:2funny: Quote Link to comment Share on other sites More sharing options...
delly Posted August 14, 2010 Share Posted August 14, 2010 Nemesis89;230228'] non stavo scherzando, se è convinto di quello che ha detto meglio se si dedica ad altro... fossi in te cmq le sposterei, la differenza non la noti in prestazioni, ma la noti in temperature...ci vogliono 2min a levare la scheda dal secondo slot e metterla nel terzo... buttare oltre 300€ per una rampage3 o altra mobo con pci-e 16x distanti, non ha senso, specie per te che nemmeno overclocchi, e la rampage2, per quanto sia, è già fin troppo sprecata... Quote Link to comment Share on other sites More sharing options...
[ITA]Nemesis89 Posted August 14, 2010 Share Posted August 14, 2010 molto meglio personalmente il 690 II l ho visto, cmq d estetica non mi piace piu di tanto,questo e molto bello da vedere.. Quote Link to comment Share on other sites More sharing options...
[ITA]Nemesis89 Posted August 14, 2010 Share Posted August 14, 2010 non stavo scherzando, se è convinto di quello che ha detto meglio se si dedica ad altro... fossi in te cmq le sposterei, la differenza non la noti in prestazioni, ma la noti in temperature...ci vogliono 2min a levare la scheda dal secondo slot e metterla nel terzo... buttare oltre 300€ per una rampage3 o altra mobo con pci-e 16x distanti, non ha senso, specie per te che nemmeno overclocchi, e la rampage2, per quanto sia, è già fin troppo sprecata... io ci avevo provato a farlo ma poi non ci entrava.... poi riacceso il pc mi e comparso una schermata del boot che mi diceva di scegliere il bott per far partire windows boh poi ho scoperto che si erano invertiti gli ssd da soli senza toccare niente... ho imparato una cosa che quando metto meno dentro al pc anche solo per attaccare una ventolian alla mobo faccio danni quando sono bravo :clapclap: na volta dopo aver attaccato una ventola sulle ram e altre 2 ventole vado ad accendere il pc e sul lcd poster mi scriveva locked e il computer si accndeva ma non dava segni di vita LoL io sono un po un nabbo di pc meglio che mi sto fermo se no faccio solo danni.. Quote Link to comment Share on other sites More sharing options...
tom1 Posted August 14, 2010 Share Posted August 14, 2010 Nemesis89;230238']l ho visto' date=' cmq d estetica non mi piace piu di tanto,questo e molto bello da vedere..[/quote'] a me personalmente l'antec non mi piace per le soluzioni interne nella disposizione dei componenti,sempre CM potresti vedere l'Haf-x Quote Link to comment Share on other sites More sharing options...
[ITA]Nemesis89 Posted August 14, 2010 Share Posted August 14, 2010 a me personalmente l'antec non mi piace per le soluzioni interne nella disposizione dei componenti,sempre CM potresti vedere l'Haf-x visto... questo e bello.. Quote Link to comment Share on other sites More sharing options...
tom1 Posted August 14, 2010 Share Posted August 14, 2010 è un ottimo case ha di tutto spazio a volontà ed è anche molto areato Quote Link to comment Share on other sites More sharing options...
Project Zero Posted August 14, 2010 Share Posted August 14, 2010 Nemesis89;230230']per il case ha fatto tutto lui' date=' l ho pagato sui[b'] 180€[/b] penso sia buonetto anche per il costo.. Fiskia non stavo scherzando, se è convinto di quello che ha detto meglio se si dedica ad altro... fossi in te cmq le sposterei, la differenza non la noti in prestazioni, ma la noti in temperature...ci vogliono 2min a levare la scheda dal secondo slot e metterla nel terzo... buttare oltre 300€ per una rampage3 o altra mobo con pci-e 16x distanti, non ha senso, specie per te che nemmeno overclocchi, e la rampage2, per quanto sia, è già fin troppo sprecata... Beh non posso che quotare :AAAAH: Nemesis89;230241']io ci avevo provato a farlo ma poi non ci entrava.... poi riacceso il pc mi e comparso una schermata del boot che mi diceva di scegliere il bott per far partire windows boh poi ho scoperto che si erano invertiti gli ssd da soli senza toccare niente... ho imparato una cosa che quando metto meno dentro al pc anche solo per attaccare una ventolian alla mobo faccio danni quando sono bravo :clapclap:na volta dopo aver attaccato una ventola sulle ram e altre 2 ventole vado ad accendere il pc e sul lcd poster mi scriveva locked e il computer si accndeva ma non dava segni di vita LoL io sono un po un nabbo di pc meglio che mi sto fermo se no faccio solo danni.. Sei un mago Quote Link to comment Share on other sites More sharing options...
delly Posted August 14, 2010 Share Posted August 14, 2010 Beh non posso che quotare :AAAAH: :asd: :n2mu: Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.