Jump to content

DFI Lanparty Ut P35-t2r [Thread ufficiale]


valego

Recommended Posts

  • Replies 371
  • Created
  • Last Reply

Top Posters In This Topic

Per chi ha questa scheda madre....riporto i migliori settaggi provati con l'ultimo bios ufficaile:

 

CPU Feature:

 

Thermal Management Control......... - Disabled

PPM(EIST) Mode..................... - Disabled

Limit CPUID MaxVal................. - Disabled

CIE Function....................... - Disabled

Execute Disable Bit................ - Disabled

Virtualization Technology.......... - Disabled

Core Multi-Processing.............. - Enabled

 

DRAM Timing:

 

Enhance Data transmitting.......... - Fast

Enhance Addressing................. - Fast

Channel 1 CLK fine delay........... - 14

Channel 2 CLK fine delay........... - 14

CAS Latency Time (tCL)............. - 5

RAS# to CAS# Delay (tRCD).......... - 5

RAS# Precharge (tRP)............... - 5

Precharge Delay (tRAS)............. - 9

All Precharge to Act............... - 5

REF to ACT Delay (tRFC)............ - 25

Performance Level.................. - 7

Read delay phase adjust............ - Auto

MCH ODT Latency.................... - Auto

Write to PRE Delay (tWR)........... - 11

Rank Write to Read (tWTR).......... - 10

ACT to ACT Delay (tRRD)............ - 3

Read to Write Delay (tRDWR)........ - 8

Ranks Write to Write (tWRWR)....... - 8

Ranks Read to Read (tRDRD)......... - 6

Ranks Write to Read (tWRRD)........ - 5

Read CAS# Precharge (tRTP)......... - 3

ALL PRE to Refresh................. - 4

 

Genie BIOS Settings:

 

Exist Setup Shutdown............... - Mode 2

CLOCK VC0 divider.................. - Auto

CPU Clock Ratio Unlock............. - Enabled

CPU Clock Ratio.................... - 8

Target CPU Clock................... - 3800MHz

CPU Clock.......................... - 475

Boot Up Clock...................... - Auto

DRAM Speed......................... - 333/800

Target DRAM Speed.................. - 1141MHz

PCIE Clock......................... - 100mhz

 

Voltage Settings:

 

CPU VID Control.................... - 1.52500v

CPU VID Special Add................ - Auto

DRAM Voltage Control............... - 2.230v

SB 1.05V Voltage................... - 1.070v

SB Core/CPU PLL Voltage............ - 1.55v

NB Core Voltage.................... - 1.50v

CPU VTT Voltage.................... - 1.60v

Vcore Droop Control................ - Disabled

Clockgen Voltage Control........... - 3.45v

GTL+ Buffers Strength.............. - Weak

Host Slew Rate..................... - Weak

GTL REF Voltage Control............ - Disable

CPU GTL1/3 REF Volt................ - 110

CPU GTL 0/2 REF Volt............... - 110

North Bridge GTL REF Volt.......... - 110

 

 

Genie BIOS Settings:

 

PCIE Slot Config................... - 1X 1X

CPU Spread Spectrum................ - Disabled

PCIE Spread Spectrum............... – Disabled

SATA Spread Spectrum............... – Disabled

 

Ciao;)

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.


×
×
  • Create New...