stedec Posted July 22, 2014 Share Posted July 22, 2014 Ciao a tutti, sono nuovo di questo FORUM, mi chiamo STEFANO, di SIRACUSA (SICILIA) vorrei finalmente realizzare il mio pc con impianto a liquido. Il PC sarà utilizzato soltanto per gaming e internet. Per quanto riguarda l'hardware del Pc fino ad ora non ho ordinato nessun elemento o accessorio. Soltanto come case vorrei acquistare il DimasTech Bench Table EasyXL Vorrei maggiori informazioni riguardante il CASE... e una descrizione di tutto quello che occorre sia quando riguarda il LIQUID COOLING e l'HARDWARE per creare un PC OTTIMO..(non vado a spesa).... (migliori marche) Consigli? Grazie I componenti che vorrei acquistare: CASE DimasTech Bench Table EasyXL - Nero Grafite SCHEDA MADRE MSI Z97 GAMING 7 Scheda madre Intel ATX Intel Socket 1150 CPU *Intel Processore Boxed Intel Core i5-4670K Haswell, Nero RAM 8GB Corsair Vengeance LP HD Samsung , SSD 840 PRO Stand Alone 256 GB HD ADATTATORE Sourcingmap - Adattatore per montaggio supporto disco rigido SSD, materiale: metallo, colore: Nero HD Seagate Hard Disk 3tb – ATA 600 VGA EVGA NVIDIA GeForce GTX 770 Superclocked con ACX Cooler scheda grafica (PCI, 2GB GDDR5 Speicher, DVI, 1 GPU) LETTORE BRD ASUS 5,25" SATA BRD BULK - NERO LETTORE DVD LG DUAL LAYER SATA AUDIO Asus Xonar D2/PM/A 7.1 ALIMENTATORE Corsair AX-860 - 80 PLUS PLANTIUM CONTROLLER Aqua computer aquaero 5 Pro RADIATORE 2 X Radiatore Alphacool NexXxoS XT45 Full Copper 360mm PORTA RAD. Staffa di Fissaggio Esterna per Radiatori Triventola Phobya 3x120 mm VASCHETTA Vaschetta EK Water Blocks EK-Multioption X2 250 Advanced POMPA: Pompa Phobya DC12-400 CPU EK Water Blocks EK-Supremacy Clean CSQ VENTOLA Corsair Air Series AF120 Quiet Edition, 120mm - LED Rosso GRIGLIA Griglia 120x120 Metallo – silver SENSORE Sensore Phobya In/Outer thread G1/4 Display Blue TUBO PrimoChill Tubo PrimoFlex Advanced LRT 13/10 mm - Trasparente, 3m RACCORDI Bitspower Connettore Dritto G1/4 / tubo Ø13/10mm - Argento VGA EK Water Blocks EK-FC770 GTX - Nickel+Acetal Quote Link to comment Share on other sites More sharing options...
tom1 Posted July 22, 2014 Share Posted July 22, 2014 ciao passa a presentarti qui http://www.xtremehardware.com/forum/forumdisplay.php?f=46 Quote Link to comment Share on other sites More sharing options...
Kltsune Posted July 22, 2014 Share Posted July 22, 2014 HD: per storage ti consiglio un WD green o red. ALI: inutile imho un 860, se vorrai fare SLI in futuro ok, altrimenti ti basterebbe un 600 e stiamo comunque larghi. CPU: visto che devi ancora acquistare tutto prendi un 4690k. Quote Link to comment Share on other sites More sharing options...
Tex Posted July 22, 2014 Share Posted July 22, 2014 Imho ci sono molte altre cose da rivedere... Sei sicuro del bench table? Dovrai rendere conto alla polvere e al rumore che sentirai.. Quote Link to comment Share on other sites More sharing options...
stedec Posted July 22, 2014 Author Share Posted July 22, 2014 (edited) HD: per storage ti consiglio un WD green o red.ALI: inutile imho un 860, se vorrai fare SLI in futuro ok, altrimenti ti basterebbe un 600 e stiamo comunque larghi. CPU: visto che devi ancora acquistare tutto prendi un 4690k. Tu cosa mi consigli di acquistare? O qualcosa di genere: CPU: Intel Core i5 4690K / 3.5 GHz processore HD: Western Digital WD40EFRX RED HardDisk 4 TB ALIMENTATORE: Corsair CX600 V2 ATX 600 W Imho ci sono molte altre cose da rivedere...Sei sicuro del bench table? Dovrai rendere conto alla polvere e al rumore che sentirai.. Si sono molto sicuro del Bench table... Da rivedere cosa? Voglio costruire un PC tutto esternamente Edited July 22, 2014 by stedec Quote Link to comment Share on other sites More sharing options...
tom1 Posted July 22, 2014 Share Posted July 22, 2014 CASE DimasTech Bench Table EasyXL - Nero GrafiteSCHEDA MADRE ASUS Maximus VII Hero CPU *Intel Processore Boxed Intel Core i5-4690K Haswell, Nero RAM 16GB Corsair Vengeance Pro HD Samsung , SSD 840 PRO Stand Alone 256 GB HD ADATTATORE Sourcingmap - Adattatore per montaggio supporto disco rigido SSD, materiale: metallo, colore: Nero HD Seagate Hard Disk 3tb – ATA 600 VGA EVGA NVIDIA GeForce GTX 770 Superclocked con ACX Cooler scheda grafica (PCI, 2GB GDDR5 Speicher, DVI, 1 GPU) LETTORE BRD ASUS 5,25" SATA BRD BULK - NERO LETTORE DVD LG DUAL LAYER SATA AUDIO Asus Xonar D2/PM/A 7.1 ALIMENTATORE Corsair AX-760 - 80 PLUS PLANTIUM CONTROLLER Aqua computer aquaero 5 Pro RADIATORE 2 X Radiatore Alphacool NexXxoS XT45 Full Copper 360mm PORTA RAD. Staffa di Fissaggio Esterna per Radiatori Triventola Phobya 3x120 mm VASCHETTA Vaschetta EK Water Blocks EK-Multioption X2 250 Advanced POMPA: Pompa Phobya DC12-400 CPU EK Water Blocks EK-Supremacy Clean CSQ VENTOLA Corsair Air Series AP120 Quiet Edition, 120mm - LED Rosso GRIGLIA Griglia 120x120 Metallo – silver SENSORE Sensore Phobya In/Outer thread G1/4 Display Blue TUBO PrimoChill Tubo PrimoFlex Advanced LRT 13/10 mm - Trasparente, 3m RACCORDI Bitspower Connettore Dritto G1/4 / tubo Ø13/10mm - Argento VGA EK Water Blocks EK-FC770 GTX - Nickel+Acetal ecco le mie correzioni e consigli Quote Link to comment Share on other sites More sharing options...
stedec Posted July 22, 2014 Author Share Posted July 22, 2014 ecco le mie correzioni e consigli Per quando riguarda il water colling, consigli e correzioni per tutto? Altre periferiche ed accessori per tutto.... Vorrei aggiungere delle luci ad esempio: LED NORMALI XSPC Twin 3mm LED Wire - Rosso LED NORMALI XSPC Single 5mm LED Wire - Rosso LED NORMALI XSPC Twin 5mm LED Wire - Rosso LED NORMALI Lamptron 4-Cluster LaZer LED - red LED NORMALI Bitspower Kit Luce Connettore G1/4 - Crystal Lighting 3Pin - Red* Quote Link to comment Share on other sites More sharing options...
tom1 Posted July 22, 2014 Share Posted July 22, 2014 sei sicuro che ci entri tutto? il banchetto è grande ma di per se un impianto con tali componenti richiede spazio Quote Link to comment Share on other sites More sharing options...
liberato87 Posted July 22, 2014 Share Posted July 22, 2014 ciao e bevenuto. per quanto rigaurda il raffreddamento a liquido devi prima renderti conto degli spazi e delle predisposizioni del banchetto, cosi puoi vedere quanti e quali rad puoi installare. e allo stesso modo devi valutare tu se è meglio una vaschetta cilindrica, una da bay, oppure una soluzione top res compatto per contenere gli ingombri. per quanto riguarda i componenti per il raffreddamento che hai postato, due 360 sono superflui per una haswell e una 770. con un 360 dovresti tenerli tranquillamente, con un 480 è ancora meglio. ti ripeto, valuta bene gli ingombri e in base alle predisposizioni del banchetto. Quote Link to comment Share on other sites More sharing options...
Kltsune Posted July 22, 2014 Share Posted July 22, 2014 Tu cosa mi consigli di acquistare? O qualcosa di genere:CPU: Intel Core i5 4690K / 3.5 GHz processore HD: Western Digital WD40EFRX RED HardDisk 4 TB ALIMENTATORE: Corsair CX600 V2 ATX 600 W Si sono molto sicuro del Bench table... Da rivedere cosa? Voglio costruire un PC tutto esternamente Se devi prende un ali Corsair prendi un AX o un AXi, gli altri lasciali stare. Altrimenti puoi prendere un XFX 550W, o se vuoi fare SLI 750 o 850 per stare larghi. Quote Link to comment Share on other sites More sharing options...
Tex Posted July 22, 2014 Share Posted July 22, 2014 Mmmh rivedi anche la pompa... Con quella sei davvero limitato. L'avevo... Per singolo loop va bene, ma se fai 2.rad vga e cpu e poco poco Quote Link to comment Share on other sites More sharing options...
stedec Posted July 22, 2014 Author Share Posted July 22, 2014 Mmmh rivedi anche la pompa... Con quella sei davvero limitato.L'avevo... Per singolo loop va bene, ma se fai 2.rad vga e cpu e poco poco Tu quale consigli come pompa per utilizzare 2 radiatori, vga, e cpu? Quote Link to comment Share on other sites More sharing options...
Tex Posted July 22, 2014 Share Posted July 22, 2014 Una ddc o una d5 con relativo top. Con una bella vaschetta a tubo messo alla lunga al lato del banchetto Quote Link to comment Share on other sites More sharing options...
stedec Posted July 22, 2014 Author Share Posted July 22, 2014 Una ddc o una d5 con relativo top.Con una bella vaschetta a tubo messo alla lunga al lato del banchetto POMPA: Laing Pompa Originale DDC-1RT/Plus - 12V con 2x G1/4 VASCHETTA: Bitspower Tanica Z-Multi 80mm Quote Link to comment Share on other sites More sharing options...
Tex Posted July 23, 2014 Share Posted July 23, 2014 POMPA: Laing Pompa Originale DDC-1RT/Plus - 12V con 2x G1/4 VASCHETTA: Bitspower Tanica Z-Multi 80mm Già meglio, oltre quello monterei anche personalmente questa: http://www.drako.it/drako_catalog/product_info.php?products_id=7136#.U89dt8JYzFo Per comodità e anche per lato estetico siccome parliamo di banchetto Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.