burzu Posted December 11, 2011 Author Share Posted December 11, 2011 grazie, ma rinuncio; la cosa stadiventando paradossale. Grazie ancora e buone feste Quote Link to comment Share on other sites More sharing options...
tom1 Posted December 11, 2011 Share Posted December 11, 2011 spiace :( Quote Link to comment Share on other sites More sharing options...
burzu Posted December 12, 2011 Author Share Posted December 12, 2011 (edited) Ma è sicuro che LIV funziona? Dopo una settimana di prove e provette, con alcune interruzioni per mettere la testa sotto l'acqua per raffreddare le sinapsi sto cominciando a pensare che il problema sia proprio quello; le impostazioni da me settate sono le seguenti:  Router Linksys WRT54GC porte da 5060 a 5065 aperte in tcp e udp su ip 192.168.1.30 porta 8000 aperta come sopra porta 12000 aperta come sopra  LIV Prov.s: Descrizione: LIV Utente: numero assegnatomi Password: numerica Registry: 192.168.1.1 Porta: 5065 N. telefono: quello assegnatomi Modo: in/out Stato: Abil.  Aladino Samsung WIP-6000M  5-12 test 1 versione: hw 0.3.1 sw 2.2.0 4 Env Settings scan: attiva dhcp: disattiva prov: disattiva dsign: disattiva displaylcd: tel number backlight: backlight init  5 VOIP Settings service domain name: sip.liberailvoip.it service domain port: 5060 expire time: 3600 proxy ip: sip.liberailvoip.it proxy port: 5060 im server domain: vuoto im server port: 12000 portal server domain: vuoto my sip port: 5060 my rtp port: 8000 my rtp codec: g729 g729a g723.1 g711alaw g711ulaw my tel number: 515xxxx sip auth. user: 515xxxx sip auth. pasword: xxxxxxxx (numerica) timer setting: 1=500 2=4000 3=5000 4=1000 5=1000 6=0 7=0 8=09=180000 10=0 jitter setting: 1=180 2=2 3=5 4=100 5=70 6=500 7=0 8=0 9=0 10=0 param 1 e 2 e 3 e 4 setting: 0  6 IP Settings ip address: 192.168.1.30 gateway: 192.168.1.1 netmask: 255.255.255.0 dns ip: 62.101.93.101 (impostato da solo, corrisponde a quello del router) provision server ip: 192.168.1.1 upgrade server ip: vuoto  11 Wi-Fi Settings Wi-Fi flag: off AUTH type: on WPA type: none EAP type: none EAP sub-type: none Encrypt type: wep GrpEnc type: wep 104 EAP TLS PW: vuoto EAP ID: vuoto EAP PW: vuoto  12 Change Bearer: solo gsm  All'accensione aggancia la rete, registrazione effettuata e dopo un paio di lampeggii blu e rosso del cerchietto si accende blu e "Non registrato" con cornetta barrata. Maledetto!!! Chissà se nell'acqua farà qualche bollicina blu? Edited December 12, 2011 by burzu Quote Link to comment Share on other sites More sharing options...
tom1 Posted December 12, 2011 Share Posted December 12, 2011 , dopo la risata per la domanda finale , ti chiedo la basetta è collegata ? cioè il cavo ethernet è collegato se si a cosa? Quote Link to comment Share on other sites More sharing options...
burzu Posted December 12, 2011 Author Share Posted December 12, 2011 Buongiorno, la basetta è collegata alla corrente elettrica tramite il suo cavetto infilato nell'unico buco sito posteriormente. Sarebbe veramente difficile farci entrare un rj45. Quote Link to comment Share on other sites More sharing options...
tom1 Posted December 12, 2011 Share Posted December 12, 2011 che come vedi l'ingresso c'è  Quote Link to comment Share on other sites More sharing options...
tom1 Posted December 12, 2011 Share Posted December 12, 2011 comunque vedevo qui service domain name: sip.lioberailvoip.it service domain port: 5060 expire time: 3600 proxy ip: sip.liberailvoip.it proxy port: 5060  hai messo lioberailvoip, ora non so se hai trascritto male o è anche impostato Quote Link to comment Share on other sites More sharing options...
burzu Posted December 12, 2011 Author Share Posted December 12, 2011  Questo è quello che ho io e dietro ha solo un coassiale per l'attacco della corrente. Alla rete dovrebbe collegarsi con scheda di rete interna. Mi scuso per l'errore ma è solo un errore di battitura Quote Link to comment Share on other sites More sharing options...
tom1 Posted December 12, 2011 Share Posted December 12, 2011 sorvolando su questo anche se mi interesserebbe una foto magari uppala sul nostro hosting  XtremeShack.com - Free Image Hosting by XtremeHardware  sapere se hai messo poi l'id e pass della registrazione al servizio libera il voip Quote Link to comment Share on other sites More sharing options...
burzu Posted December 12, 2011 Author Share Posted December 12, 2011 Quote Link to comment Share on other sites More sharing options...
burzu Posted December 12, 2011 Author Share Posted December 12, 2011 Id ho messo (come indicato) il numero telefonico che mi è stato assegnato e come password quella numerica da me indicata in fase di registrazione Quote Link to comment Share on other sites More sharing options...
tom1 Posted December 12, 2011 Share Posted December 12, 2011 ok Quote Link to comment Share on other sites More sharing options...
burzu Posted December 12, 2011 Author Share Posted December 12, 2011 Hai visto qual'é il modello? qual'é la differenza? Non credo sia così importante, anche perché la connessione funziona perfettamente e il segnale è al massimo. Ora dice sempre "Non registrato" e il pallino è blu con la W fissa. Brutto figlio di una spiaggia! Quote Link to comment Share on other sites More sharing options...
tom1 Posted December 12, 2011 Share Posted December 12, 2011 si , cambia che in quello di su avvolte è limitato dal collegamento obbligatorio con il cavo rj45 Quote Link to comment Share on other sites More sharing options...
burzu Posted December 13, 2011 Author Share Posted December 13, 2011 ho notato che se faccio un reset factory e reimposto i dati corretti l'apparecchio visualizza il numero telefonico e la cornetta barrata sparisce, ma il cerchio lampeggia (W-n blu - rosso) erimane così fino al prossimo riavvio. Quote Link to comment Share on other sites More sharing options...
tom1 Posted December 13, 2011 Share Posted December 13, 2011 provato a questo punto con un altro provider voip ? Quote Link to comment Share on other sites More sharing options...
burzu Posted December 13, 2011 Author Share Posted December 13, 2011 (edited) ho tentato di installare voipcheap ma non ci ho raccapezzato granché; tu cosa mi consigli? Edited December 13, 2011 by burzu Quote Link to comment Share on other sites More sharing options...
tom1 Posted December 13, 2011 Share Posted December 13, 2011 voip buster provato Quote Link to comment Share on other sites More sharing options...
burzu Posted December 14, 2011 Author Share Posted December 14, 2011 Appena riesco a montare il pc con ubuntu provo a mettere voip buster; riguardo a liberailovoip il gateway deve essere attivato o no? Quote Link to comment Share on other sites More sharing options...
tom1 Posted December 14, 2011 Share Posted December 14, 2011 no Quote Link to comment Share on other sites More sharing options...
burzu Posted December 14, 2011 Author Share Posted December 14, 2011 Ricapitolando: sono riuscito a collegare il cordless alla rete in maniera stabile. Ho tolto la spunta attiva sul gateway come da te consigliato e nel dial plan ho messo LIV come provider predefinito.  Le impostazioni ora sono:  Router Linksys WRT54GC porte da 5060 a 5065 aperte in tcp e udp su ip 192.168.1.30 porta 8001 aperta come sopra porta 12000 aperta come sopra  LIV Prov.s: Descrizione: LIV Utente: numero assegnatomi Password: numerica Registry: 192.168.1.1 Porta: 5065 N. telefono: quello assegnatomi Modo: in/out Stato: Abil.  Aladino Samsung WIP-6000M  5-12 test 1 versione: hw 0.3.1 sw 2.2.0 4 Env Settings scan: attiva dhcp: disattiva prov: disattiva dsign: disattiva displaylcd: tel number backlight: backlight init  5 VOIP Settings service domain name: sip.liberailvoip.it service domain port: 5065 expire time: 3600 proxy ip: sip.liberailvoip.it proxy port: 5065 im server domain: vuoto im server port: 12000 portal server domain: vuoto my sip port: 5065 my rtp port: 8001 my rtp codec: g723.1 g729 g729a g711alaw g711ulaw my tel number: 515xxxx sip auth. user: 515xxxx sip auth. pasword: xxxxxxxx (numerica) timer setting: 1=500 2=4000 3=5000 4=1000 5=1000 6=0 7=0 8=09=180000 10=0 jitter setting: 1=180 2=2 3=5 4=100 5=70 6=500 7=0 8=0 9=0 10=0 param 1 e 2 e 3 e 4 setting: 0  6 IP Settings ip address: 192.168.1.30 gateway: 192.168.1.1 netmask: 255.255.255.0 dns ip: 62.101.93.101 (impostato da solo, corrisponde a quello del router) provision server ip: 192.168.1.1 upgrade server ip: vuoto  11 Wi-Fi Settings Wi-Fi flag: off AUTH type: on WPA type: none EAP type: none EAP sub-type: none Encrypt type: wep GrpEnc type: wep 104 EAP TLS PW: vuoto EAP ID: vuoto EAP PW: vuoto  12 Change Bearer: solo gsm  Cosa credi ci sia ora che non va? Grazie Quote Link to comment Share on other sites More sharing options...
tom1 Posted December 14, 2011 Share Posted December 14, 2011 nulla Quote Link to comment Share on other sites More sharing options...
burzu Posted December 14, 2011 Author Share Posted December 14, 2011 (edited) allora perché chiama ma non squilla? C'é ancora qualcosa nella configurazione che non va? Inoltre quando si prova a chiamarlo risulta occupato. Bah ... Edited December 14, 2011 by burzu Quote Link to comment Share on other sites More sharing options...
tom1 Posted December 15, 2011 Share Posted December 15, 2011 come deto prva prima con un altro provider Quote Link to comment Share on other sites More sharing options...
burzu Posted December 15, 2011 Author Share Posted December 15, 2011 ho scaricato voipbuster e configurato liberailvoip come descritto (spero di aver azzeccato tutte le impostazioni); indipendentemente dal credito che devo ancora mettere, se provo a chiamare dal programma pc ogni tanto mi fa chiamare i telefoni fissi, ma quando rispondono non sento nulla. Chiamando il 5156590 il telefono da occupato. Se vuoi provare sentirai il segnale di occupato. Saluti Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.