Homer Simpson Posted September 13, 2009 Author Share Posted September 13, 2009 Ragazzi , ora che ho raggiunto i 4ghz senza problemi e che la temperature in stanza è calata di quasi 4gradi volevo puntare ai 4.2ghz . Con gli stessi settaggi che uso a 4ghz , modificando solo il v.core da 1.336 reali a 1.35 da bios il sistema va in blue screen , cosa devo modificare ? Ecco setto il tutto Cpu V 1.35 Cpu PPl 1.82 Qpi V 1.35 IOH V 1.25 Dram V 1.65 Dove posso ritoccare ? Quote Link to comment Share on other sites More sharing options...
dj883u2 Posted September 13, 2009 Share Posted September 13, 2009 I 4.0ghz li hai raggiunti stabili? Hai fatto un'oretta con Prime95 o hai fatto girare LinX per vedere se sei stabile? Quote Link to comment Share on other sites More sharing options...
Homer Simpson Posted September 13, 2009 Author Share Posted September 13, 2009 a dir la verità no , però hanno retto 3DMark05/06/Vantage , Super pi , W-prime :cheazz: Quote Link to comment Share on other sites More sharing options...
dj883u2 Posted September 13, 2009 Share Posted September 13, 2009 a dir la verità no , però hanno retto 3DMark05/06/Vantage , Super pi , W-prime :cheazz: Non puoi considerarti stabile allora...... Fai almeno 1h di Prime95. Lo scarichi da qui: http://www.pctuner.org/download/utility/p95v2511.zip Imposta cosi: Poi fai ok e lascialo andare per 1H di seguito. Se non hai problemi, puoi considerarti veramente stabile. Quote Link to comment Share on other sites More sharing options...
Homer Simpson Posted September 13, 2009 Author Share Posted September 13, 2009 ok e se non lo fossi "causa blue screen , è quello il mio problema" come devo agire ? Quote Link to comment Share on other sites More sharing options...
dj883u2 Posted September 13, 2009 Share Posted September 13, 2009 ok e se non lo fossi "causa blue screen , è quello il mio problema" come devo agire ? Impostandolo come ti ho detto io, devi agire sul voltaggio del processore per raggiungere la stabilità. Quote Link to comment Share on other sites More sharing options...
Totocellux Posted September 13, 2009 Share Posted September 13, 2009 ok e se non lo fossi "causa blue screen , è quello il mio problema" come devo agire ? il PLL a 1.82V mi sembra al limite superiore di impostazione x un VCore di 1.35V, e non dovrebbe rendersi necessario alzarlo ulteriormente, anzi lo porterei anche a 1.80V se non va come ti indica Antonio, a 200x20 se hai l'HT attivato proverei a stabilizzare il QPI con uno step+ di VQPI Quote Link to comment Share on other sites More sharing options...
Homer Simpson Posted September 13, 2009 Author Share Posted September 13, 2009 ok ,adesso mi faccio un bagno e faccio partire il test. Da domani inizio il liceo , oltre ad avere una strizza tremenda non so se avrò piu molto tempo -.-- Quote Link to comment Share on other sites More sharing options...
dj883u2 Posted September 14, 2009 Share Posted September 14, 2009 Come procede? Quote Link to comment Share on other sites More sharing options...
Homer Simpson Posted September 16, 2009 Author Share Posted September 16, 2009 2 giorni di liceo , compiti a casa e test in classe , andiamo bene . Tempo libero zero , cmq una domanda , se insieme alla LOAD-LINE CALIBRATION attivo pure il Cpu Differential Amplitude su 800mV ? Miglioro qualcosa ? Infine mi hanno fatto notare la voce ACPI 2.0 Support che dovrebbe garantire maggiore stabilità , che mi dici ? Quote Link to comment Share on other sites More sharing options...
Homer Simpson Posted September 16, 2009 Author Share Posted September 16, 2009 ho scoperto che la mobo ha un v-droop mostruoso sul QPI se io da bios setto 1.35 sul qpi in realtà la mobo da circa 1.3. Adesso ho settato 1.366 che reali sono 1.349 , lascio così ? Che ne dite ? Quote Link to comment Share on other sites More sharing options...
dj883u2 Posted September 16, 2009 Share Posted September 16, 2009 ho scoperto che la mobo ha un v-droop mostruoso sul QPI se io da bios setto 1.35 sul qpi in realtà la mobo da circa 1.3.Adesso ho settato 1.366 che reali sono 1.349 , lascio così ? Che ne dite ? Lo hai misurato con un tester? Quote Link to comment Share on other sites More sharing options...
Homer Simpson Posted September 16, 2009 Author Share Posted September 16, 2009 l'ho letto dal display della scheda madre utilizzando la consolle "col pc sotto stress" e nel bios . Cmq il pc crasha con la solita blue screen , anche con 1.35 reali al qpi e 1.65 alla mobo . come mi consigli di settare le voci LOAD-LINE CALIBRATION Cpu Differential Amplitude ACPI 2.0 Support ? Quote Link to comment Share on other sites More sharing options...
Homer Simpson Posted September 17, 2009 Author Share Posted September 17, 2009 uppino , come setto le voci di sopra ? p.s. Arrivato il dissipatore per le mie corsair , Corsair CMXAF2 Airflow , mi piace tanto Quote Link to comment Share on other sites More sharing options...
dj883u2 Posted September 17, 2009 Share Posted September 17, 2009 LOAD-LINE CALIBRATION: Enabled Cpu Differential Amplitude: Auto o almassimo 900 ACPI 2.0 Support: Non ho idea.....lascia su Auto. Quote Link to comment Share on other sites More sharing options...
Homer Simpson Posted September 17, 2009 Author Share Posted September 17, 2009 so di molta gente che lo setta a 800mV ma non sapevo perchè , cmq non va 21x200 4200mhz 1600mhz 8-8-8-24 V.core1.35 reali v-core "tengo i 4ghz con 1.336 reali" Qpi 1.35 reali PPl 1.82 reali Dram 1.65 Reali IOH 1.25 Reali. Blue screen al 3DM06-05-Vantage . Non so piu dove mettere mano , le temp non superano i 70gradi , ho disattivato il riavvio rapido di windows per leggermi con calma il BSOD Quote Link to comment Share on other sites More sharing options...
Homer Simpson Posted September 22, 2009 Author Share Posted September 22, 2009 niente da fare , non regge i 4200 200x21 . Ho provato con Cpu V.core 1.35 Reali Cpu PPl 1.83 Reali Qpi Dram 1.349 Reali IOH Core V 1.25 Reali Dram V 1.653 circa reali mi da sempre blue screen , al riavvio successivo mi da questo resoconto , come devo agire ? Quote Link to comment Share on other sites More sharing options...
Totocellux Posted September 22, 2009 Share Posted September 22, 2009 per caso ti freeza e subito dopo ti si sbianca lo schermo al momento del blocco? Quote Link to comment Share on other sites More sharing options...
Homer Simpson Posted September 22, 2009 Author Share Posted September 22, 2009 allora , dipende da cosa sta facendo il quel momento il pc. Se fa in Blue Screen durante un 3DMark l' immagine si ferma è un secondo dopo parte il BS . Se invece sono nel desktop tutto si freeza per 4-5 secondi per poi andare in BS. Non c'è nessun problema temperature Quote Link to comment Share on other sites More sharing options...
dj883u2 Posted September 22, 2009 Share Posted September 22, 2009 Io non vorrei essere ripetitivo.....ma i 4.0Ghz li hai testati in stabilità? Se si con che programmi?e con quli settaggi? Quote Link to comment Share on other sites More sharing options...
Totocellux Posted September 22, 2009 Share Posted September 22, 2009 a che frequenza stanno ora le ram? Quote Link to comment Share on other sites More sharing options...
Homer Simpson Posted September 25, 2009 Author Share Posted September 25, 2009 Le ram sono a 1600mhz 8-8-8-24 1t , frequenza che a 3,8ghz reggono con 1.64 di v.dram , ora nemmeno con 1.67. Ho provato così 200x21 = 4200mhz 8-8-8-24 1t Cpu V 1.36 reali Cpu ppl. 1.83 reali Qpi 1.35 reali Dram V 1.67 Ioh 1.265 reali ioh ,ich ecc ecc tutti 2 step dopo auto Load Line Calibration Enable Spread Spectrum 800mV:muro: a 4ghz con il test che mi ha linkato dj883u2 è stabile a 4ghz EDIT: Aspetto un nuovo bios da asus ma non se ne vedono.. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.