Mattxx88 Posted February 10, 2014 Share Posted February 10, 2014 (edited) uso già quel bios, il programma inserendo 1.212 come voltaggio resta a 1.087.. il programma msn ab non sbocca il voltaggio? i voltaggi aumentati con il tool, non li rileva nessun software, ma in realtà sono applicati edit, anzi li vedi con hwinfo i volt, quello li rileva Edited February 10, 2014 by Mattxx88 Quote Link to comment Share on other sites More sharing options...
superino Posted February 10, 2014 Author Share Posted February 10, 2014 ascolta con il boost disattivato il vcore non dovrebbe essere sempre al massimo? a me i bios mondati se provo ad attivare o a disabilitare lo SLI va in schermata nera, e dovevo riavviare, avevo provato a modificare i bios originali con voltaggio a 1,212 ecc.. funzionava bene anche attivando o disabilitando lo SLI Quote Link to comment Share on other sites More sharing options...
Mattxx88 Posted February 10, 2014 Share Posted February 10, 2014 ascolta con il boost disattivato il vcore non dovrebbe essere sempre al massimo?a me i bios mondati se provo ad attivare o a disabilitare lo SLI va in schermata nera, e dovevo riavviare, avevo provato a modificare i bios originali con voltaggio a 1,212 ecc.. funzionava bene anche attivando o disabilitando lo SLI non ho provato con lo sli, ma mi sembra strano, vedo che lo usano tt anche in sli Quote Link to comment Share on other sites More sharing options...
tom1 Posted February 11, 2014 Share Posted February 11, 2014 piccolo OT, non vediamo l'ora di vedere il tuo Monster 900D nella nostra galleria http://www.xtremehardware.com/forum/forumdisplay.php?f=142 Quote Link to comment Share on other sites More sharing options...
Mattxx88 Posted February 11, 2014 Share Posted February 11, 2014 piccolo OT, non vediamo l'ora di vedere il tuo Monster 900D nella nostra galleria http://www.xtremehardware.com/forum/forumdisplay.php?f=142 la finsci di tediare ogni nuovo utente?? sei un curiosone Quote Link to comment Share on other sites More sharing options...
tom1 Posted February 11, 2014 Share Posted February 11, 2014 la finsci di tediare ogni nuovo utente??sei un curiosone l'alcor sai dove te lo metto? :asd: Quote Link to comment Share on other sites More sharing options...
superino Posted February 11, 2014 Author Share Posted February 11, 2014 non ho provato con lo sli, ma mi sembra strano, vedo che lo usano tt anche in sli buon giorno. non so il perché ma con il bios originale non succede. nessuna novità per la lista di componenti per il sistema a liquido? Quote Link to comment Share on other sites More sharing options...
tom1 Posted February 11, 2014 Share Posted February 11, 2014 nessuna novità per la lista di componenti per il sistema a liquido? cosa vuoi sapere? ora sto leggendo il thread Quote Link to comment Share on other sites More sharing options...
superino Posted February 11, 2014 Author Share Posted February 11, 2014 cosa vuoi sapere? ora sto leggendo il thread cosa comprare, stavo pensando di liquidare le schede video in un secondo tempo. Quote Link to comment Share on other sites More sharing options...
tom1 Posted February 11, 2014 Share Posted February 11, 2014 shop indifferente? Quote Link to comment Share on other sites More sharing options...
Mattxx88 Posted February 11, 2014 Share Posted February 11, 2014 l'alcor sai dove te lo metto? :asd: devi smetterla anche di stalkerarmi buon giorno. non so il perché ma con il bios originale non succede. nessuna novità per la lista di componenti per il sistema a liquido? io col case che ti ritrovi liquiderei main, cpu e vga per i waterblock personalmente resterei in casa EK per tutti viste le ottime prestazioni cosi con un unico ordine dal sito EK saresti apposto con tutto, vaschetta, pompa, waterblockki, raccordi e tubo per il radiatore prenderei in considerazione un unico monsta nexXxos, non so se come spessore ci sta sopra al case radiatore+ventole senza dar fastidio all main dovresti misurare Quote Link to comment Share on other sites More sharing options...
superino Posted February 11, 2014 Author Share Posted February 11, 2014 shop indifferente? si si.... poi se c'è uno shop che si può spendere meno ben venga. stavo pensavo per liquidare la vga potrebbe essere una spessa inutile visto che usciranno le nuove schede, io gioco a 2560x1440. voi che ne pensate Quote Link to comment Share on other sites More sharing options...
superino Posted February 11, 2014 Author Share Posted February 11, 2014 mi potresti fare una lista? io non saprei cosa prendere le specifiche tecniche del corsair [h=4]Package contents[/h] Obsidian Series 900D Super Tower PC Case Quick Start Guide [h=4]Compatibility[/h] ATX, Micro ATX, E-ATX, HPTX, and Mini ITX compatible [h=4]Technical Specifications[/h] Includes three 120mm AF120L and one 140mm AF140L exhaust fan Brushed aluminum front fascia with full cast aluminum surround structure front and rear Five radiator mounting points: Front: up to 360mm Top: up to 480mm (4 x 120) or 420mm (3 x 140) Bottom side one: up to 480mm (4 x 120) or 420mm (3 x 140) Bottom side two (with PSU installed): up to 280mm (2 x 140) or 240mm (2 x 120) Rear: 140mm or 120mm [*]Up to fifteen total fan mount locations [*]Nine tool free 3.5” and screw-in 2.5” combo hard drive bays for maximum storage, upgradable to fifteen total (requires purchasing two additional cages) [*]Four tool-free 5.25” drive bays [*]Dual USB 3.0, quad USB 2.0 front panel I/O [*]Tool free side panel access to top panels. [*]Magnetic latch bottom HDD/Radiator chamber access with swing-out doors. [*]Full side panel window [*]Removable lower rad covers allow you to customize between cooling and clean, refined appearance [*]Three hot-swap bays integrated into one of three included modular hard drive cages [*]Ten expansion slots for multi-GPU dream systems [*]Dual PSU bays [*]CPU backplate cutout and rubber grommeted cable routing holes [*]Easily removable dust filters and fan covers [*]Snap-down cable routing latches and extra routing space behind the motherboard tray [*]PSU – ATX (not included) [*] Quote Link to comment Share on other sites More sharing options...
Mattxx88 Posted February 11, 2014 Share Posted February 11, 2014 questo è cio che vai a spendere su per giu, radiatore e ventole esclusi e da prendere su altro shop imho Quote Link to comment Share on other sites More sharing options...
Mattxx88 Posted February 11, 2014 Share Posted February 11, 2014 x i raccordi bisogna fare il conto esatto e vedere inoltre che giro vuoi far fare al tutto io li ho messi a spanne tenendomi molto stretto ah si, anche per il coolant, da prendere a parte, mi rivolgerei sui prodotti mahyems, che dopo aver provato un po tutte le marche (primochill, tfc, ek, dimas ecc ecc) reputo i migliori Quote Link to comment Share on other sites More sharing options...
tom1 Posted February 11, 2014 Share Posted February 11, 2014 quoto matt per la scelta. Quote Link to comment Share on other sites More sharing options...
Mattxx88 Posted February 11, 2014 Share Posted February 11, 2014 ho dimenticato anche lo sli bridge per le vga a liquido :AAAAH: Quote Link to comment Share on other sites More sharing options...
superino Posted February 11, 2014 Author Share Posted February 11, 2014 il resto dei componenti dove li prendo per e tutto arabo vedo nella lista che ci sono componenti non disponibili Scusatemi per essere un trita Paxx.. ma non vorrei fare acquisti sbagliati. Quote Link to comment Share on other sites More sharing options...
tom1 Posted February 11, 2014 Share Posted February 11, 2014 il resto dei componenti dove li prendo per e tutto arabovedo nella lista che ci sono componenti non disponibili mancano solo le ventole dalla lista fatta da matt. Quelle puoi prenderle da drako. Quote Link to comment Share on other sites More sharing options...
Mattxx88 Posted February 11, 2014 Share Posted February 11, 2014 manca radiatore, ventole, coolant (vedi te se vuoi semplice bidistillata o liquido colorato) e lo sli bridge per le gpu a liquido che trovi sempre da EK per il resto dei componenti io guarderei aquatuning piuttosto che drako Quote Link to comment Share on other sites More sharing options...
Mattxx88 Posted February 11, 2014 Share Posted February 11, 2014 guarda questa RIVBE con i pezzi che ti ho consigliato, montati SBAVO! http://www.overclock.net/t/993624/ek-club/2630#post_21679231 Quote Link to comment Share on other sites More sharing options...
liberato87 Posted February 11, 2014 Share Posted February 11, 2014 quoto matt per la scelta dei componenti. per il resto devi innanzi tutto scegliere tu quali e quanti rad montare. a livello di massa radiante, calcolando almeno 240 per ogni chip, con un 480 + 360 ci stai alla grande e hai ampio margine di oc. a livello di radiatori ti consiglio di dare una letta veloce qui http://www.xtremehardware.com/forum/showthread.php?t=39196&p=542731&viewfull=1#post542731 e in fondo trovi i link a diversi roundup. in base a quanti rpm vuoi tenere le ventole, supponendo che a un massimo di 1200rpm ti posso consigliare xpsc serie rx alphacool xt45, ut60 oppure monsta. hwlabs sr1 coolgate fullcopper phobya g charger per il resto ti consiglio comunque di dare uno sguardo preliminare alla guida dove sono indicati anche ventole waterblock ecc... Quote Link to comment Share on other sites More sharing options...
superino Posted February 11, 2014 Author Share Posted February 11, 2014 Ragazzi su ek se ci sono oggetti non disponibili conviene sempre prenderli? Quote Link to comment Share on other sites More sharing options...
liberato87 Posted February 11, 2014 Share Posted February 11, 2014 Ragazzi su ek se ci sono oggetti non disponibili conviene sempre prenderli? manda una mail in inglese a info@ekwb.com e chiedi i tempi Quote Link to comment Share on other sites More sharing options...
superino Posted February 11, 2014 Author Share Posted February 11, 2014 http://www.aquatuning.it/product_info.php/info/p12342_Alphacool-NexXxoS-UT60-Full-Copper-360mm.html'>http://www.aquatuning.it/product_info.php/info/p12342_Alphacool-NexXxoS-UT60-Full-Copper-360mm.html http://www.aquatuning.it/product_info.php/info/p12342_Alphacool-NexXxoS-UT60-Full-Copper-360mm.html radiatori consigliati da ombra come ventole pensavo a queste http://www.aquatuning.it/product_info.php/info/p15512_Corsair-Air-Series-SP120-PWM-High-Performance-Edition--120x120x25-.html per lo sli il bridge pensavo uno dei due http://www.aquatuning.it/product_info.php/info/p14531_Watercool-GPU-X-Dual-Link.html http://www.aquatuning.it/product_info.php/info/p11862_Koolance-Dual-VID-Verbindungsnippel-variabel-G1-4----2-3-Slot---Black.html 3 litri di Ultra Pure Water 1000ml(Art.Nr.: 30033) bastano? come coolant che dovrei prendere? come teniche? manca qualcosa??? rubinetti ecc... Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.