DanielV Posted August 10, 2013 Share Posted August 10, 2013 Oggi mi sono arrivate due schermate blu, la prima ero troppo disperato perchè era la prima schermata blu del mio pc, invece nella seconda sono riuscito a vedere la scritta RTL nella parte superiore seguita da diversi numeri. La prima schermata blu mi è arrivata quando ho impostato per la prima volta prestazioni elevate in opzioni risparmio energia, la seconda quando stavo smanettando con la chiavetta wifi che windows non riconosceva. Nel registro eventi di windows c'è scritto che le schermate blu sono causate dal Kernel-Power 41 (63) e che in totale ne ho avute 20 :AAAAH: (cosa che io non ricordo). Ho pensato al primo riavvio di disabilitare le prestazioni elevate e controllando le prestazioni massime della cpu erano impostate su 100 :AAAAH: così le ho impostate su 5 e sono passato a prestazioni bilanciate (l'opzione che ho utilizzato sempre), ma il dubbio che mi sorge è che razer game booster (installato da poco per far girare bene far cry 3) aveva le stesse impostazioni di prestazioni elevate quindi cpu a 100% e non ho mai avuto problemi. Guardando su internet ho visto che il problema potrebbe essere della ram o dell'alimentatore (che questi giorni specialmente in gaming fa un calore immenso e se lo tocco brucia un po ma è toccabile). Al prossimo riavvio dovrei fare il test della memoria ram di windows quindi vi faccio sapere. Grazie in anticipo Quote Link to comment Share on other sites More sharing options...
tom1 Posted August 10, 2013 Share Posted August 10, 2013 fai le prove e dicci poi. Quote Link to comment Share on other sites More sharing options...
DanielV Posted August 10, 2013 Author Share Posted August 10, 2013 Stranamente windows ha già finito e non ha trovato nulla Quote Link to comment Share on other sites More sharing options...
tom1 Posted August 10, 2013 Share Posted August 10, 2013 ci ricordi la tua configurazione? hai provato a fare un clear cmos? Quote Link to comment Share on other sites More sharing options...
DanielV Posted August 10, 2013 Author Share Posted August 10, 2013 Configurazione: Cpu: intel i5 3450 MB: Gigabyte GA-P61-S3 Ram: 4gb Hdd: 1)WD Caviar Blue SataII 250Gb 2) Seagate SataII 500gb Scheda video: Nvidia Palit GT630 GDDR5 1gb So: Windows 7 ultimate 32bit Case: Raidmax Typhoon Il tutto è stato assemblato da un mio amico di fiducia che ha scelto anche la configurazione per il mio budget. Il clear cmos non l'ho mai fatto perchè non sono mai entrato nel bios da quando è assemblato. L'alimentatore è questo: http://img819.imageshack.us/img819/5992/6prc.jpg La ram mi sono scordato di vedere il modello e così ho guardato su pc wizard vedendo che sono della team group (sono semplici, senza nessun rivestimento e economiche), mentre guardavo ho visto che la scheda di rete (che non ho mai utilizzato perchè utilizzo l'antenna wifi usb) corrisponde all'errore RTL8168 Quote Link to comment Share on other sites More sharing options...
micka Posted August 11, 2013 Share Posted August 11, 2013 (edited) ho avuto anch'io problemi di questo genere.ho tribolato ma era semplicemente il cavo dell'ali che non era inserito bene. roba da matti:asd: prima di tutto dovresti vedere il codice errore che ti dice. clicka col tasto destro sul Computer->Gestione->Visualizzatore eventi->Visualizzazioni personalizzate->Eventi amministrativi sulla finestra nella destra ti appariranno tutti gli errori. clicka sul kernel-power 41 e nella finestra sotto ti appariranno i dati relativi all'errore. clicka su dettagli e dopo compara con quello che trovi scritto qui:http://support.microsoft.com/kb/2028504. ti dico da adesso che nel mio caso il Timestamp del pulsante di accensione era 0 Edited August 11, 2013 by micka Quote Link to comment Share on other sites More sharing options...
DanielV Posted August 11, 2013 Author Share Posted August 11, 2013 ho avuto anch'io problemi di questo genere.ho tribolato ma era semplicemente il cavo dell'ali che non era inserito bene. roba da matti:asd: Infatti dopo quelle due schermate blu, non me l'ha fatte più. Quale cavo intendi? quello che va alla scheda madre? Quote Link to comment Share on other sites More sharing options...
micka Posted August 11, 2013 Share Posted August 11, 2013 no, il cavo di alimentazione che va dall'alimentatore alla presa di corrente. verifica però i dati dell'errore Quote Link to comment Share on other sites More sharing options...
DanielV Posted August 11, 2013 Author Share Posted August 11, 2013 no, il cavo di alimentazione che va dall'alimentatore alla presa di corrente. verifica però i dati dell'errore Quando ho fatto la foto all'ali ho dovuto staccare il cavo dell'ali e forse per questo non ho piu problemi. Il punto è che mi sembra tutto strano, se è il cavo dell'ali, il pc si spegneva di colpo come se gli staccassi la corrente. Quali dati dovrei verificare? Quote Link to comment Share on other sites More sharing options...
micka Posted August 11, 2013 Share Posted August 11, 2013 (edited) quando si spolverava il pc si doveva spostare(full tower) e probabilmente il cavo era messo male e ci è voluto pochissimo per allentarsi e darmi sto problema. clicka col tasto destro sul Computer->Gestione->Visualizzatore eventi->Visualizzazioni personalizzate->Eventi amministrativi sulla finestra nella destra ti appariranno tutti gli errori. clicka sul kernel-power 41 e nella finestra sotto ti appariranno i dati relativi all'errore. clicka su dettagli e dopo compara con quello che trovi scritto qui:Windows Kernel event ID 41 error "The system has rebooted without cleanly shutting down first" in Windows 8, Windows Server 2012, Windows 7, or Windows Server 2008 R2. ho controllato sul mio e sia codice controllo errori e timestamp pulsante di accensione erano 0 tutti e due. Edited August 11, 2013 by micka Quote Link to comment Share on other sites More sharing options...
DanielV Posted August 11, 2013 Author Share Posted August 11, 2013 Ecco i dettagli: [TABLE] [TR] [TD]-[/TD] [TD=width: 130]System[/TD] [/TR] [/TABLE] [TABLE] [TR] [TD][/TD] [TD=width: 15][/TD] [TD][TABLE] [TR] [TD]-[/TD] [TD=width: 130]Provider[/TD] [/TR] [/TABLE] [TABLE] [TR] [TD][/TD] [TD=width: 15][/TD] [TD=width: 12][/TD] [TD=width: 105][ Name][/TD] [TD]Microsoft-Windows-Kernel-Power[/TD] [/TR] [/TABLE] [TABLE] [TR] [TD][/TD] [TD=width: 15][/TD] [TD=width: 12][/TD] [TD=width: 105][ Guid][/TD] [TD]{331C3B3A-2005-44C2-AC5E-77220C37D6B4}[/TD] [/TR] [/TABLE] [/TD] [/TR] [/TABLE] [TABLE] [TR] [TD][/TD] [TD=width: 15][/TD] [TD][TABLE] [TR] [TD][/TD] [TD=width: 130]EventID[/TD] [TD]41[/TD] [/TR] [/TABLE] [/TD] [/TR] [/TABLE] [TABLE] [TR] [TD][/TD] [TD=width: 15][/TD] [TD][TABLE] [TR] [TD][/TD] [TD=width: 130]Version[/TD] [TD]2[/TD] [/TR] [/TABLE] [/TD] [/TR] [/TABLE] [TABLE] [TR] [TD][/TD] [TD=width: 15][/TD] [TD][TABLE] [TR] [TD][/TD] [TD=width: 130]Level[/TD] [TD]1[/TD] [/TR] [/TABLE] [/TD] [/TR] [/TABLE] [TABLE] [TR] [TD][/TD] [TD=width: 15][/TD] [TD][TABLE] [TR] [TD][/TD] [TD=width: 130]Task[/TD] [TD]63[/TD] [/TR] [/TABLE] [/TD] [/TR] [/TABLE] [TABLE] [TR] [TD][/TD] [TD=width: 15][/TD] [TD][TABLE] [TR] [TD][/TD] [TD=width: 130]Opcode[/TD] [TD]0[/TD] [/TR] [/TABLE] [/TD] [/TR] [/TABLE] [TABLE] [TR] [TD][/TD] [TD=width: 15][/TD] [TD][TABLE] [TR] [TD][/TD] [TD=width: 130]Keywords[/TD] [TD]0x8000000000000002[/TD] [/TR] [/TABLE] [/TD] [/TR] [/TABLE] [TABLE] [TR] [TD][/TD] [TD=width: 15][/TD] [TD][TABLE] [TR] [TD]-[/TD] [TD=width: 130]TimeCreated[/TD] [/TR] [/TABLE] [TABLE] [TR] [TD][/TD] [TD=width: 15][/TD] [TD=width: 12][/TD] [TD=width: 105][ SystemTime][/TD] [TD]2013-08-10T12:26:14.712007400Z[/TD] [/TR] [/TABLE] [/TD] [/TR] [/TABLE] [TABLE] [TR] [TD][/TD] [TD=width: 15][/TD] [TD][TABLE] [TR] [TD][/TD] [TD=width: 130]EventRecordID[/TD] [TD]52866[/TD] [/TR] [/TABLE] [/TD] [/TR] [/TABLE] [TABLE] [TR] [TD][/TD] [TD=width: 15][/TD] [TD][TABLE] [TR] [TD][/TD] [TD]Correlation[/TD] [/TR] [/TABLE] [/TD] [/TR] [/TABLE] [TABLE] [TR] [TD][/TD] [TD=width: 15][/TD] [TD][TABLE] [TR] [TD]-[/TD] [TD=width: 130]Execution[/TD] [/TR] [/TABLE] [TABLE] [TR] [TD][/TD] [TD=width: 15][/TD] [TD=width: 12][/TD] [TD=width: 105][ ProcessID][/TD] [TD]4[/TD] [/TR] [/TABLE] [TABLE] [TR] [TD][/TD] [TD=width: 15][/TD] [TD=width: 12][/TD] [TD=width: 105][ ThreadID][/TD] [TD]8[/TD] [/TR] [/TABLE] [/TD] [/TR] [/TABLE] [TABLE] [TR] [TD][/TD] [TD=width: 15][/TD] [TD][TABLE] [TR] [TD][/TD] [TD=width: 130]Channel[/TD] [TD]System[/TD] [/TR] [/TABLE] [/TD] [/TR] [/TABLE] [TABLE] [TR] [TD][/TD] [TD=width: 15][/TD] [TD][TABLE] [TR] [TD][/TD] [TD=width: 130]Computer[/TD] [TD]us3r-Ch1[/TD] [/TR] [/TABLE] [/TD] [/TR] [/TABLE] [TABLE] [TR] [TD][/TD] [TD=width: 15][/TD] [TD][TABLE] [TR] [TD]-[/TD] [TD=width: 130]Security[/TD] [/TR] [/TABLE] [TABLE] [TR] [TD][/TD] [TD=width: 15][/TD] [TD=width: 12][/TD] [TD=width: 105][ UserID][/TD] [TD]S-1-5-18[/TD] [/TR] [/TABLE] [/TD] [/TR] [/TABLE] [TABLE] [TR] [TD]-[/TD] [TD=width: 130]EventData[/TD] [/TR] [/TABLE] [TABLE] [TR] [TD][/TD] [TD=width: 15][/TD] [TD=width: 130]BugcheckCode[/TD] [TD]206[/TD] [/TR] [/TABLE] [TABLE] [TR] [TD][/TD] [TD=width: 15][/TD] [TD=width: 130]BugcheckParameter1[/TD] [TD]0xb9e15938[/TD] [/TR] [/TABLE] [TABLE] [TR] [TD][/TD] [TD=width: 15][/TD] [TD=width: 130]BugcheckParameter2[/TD] [TD]0x8[/TD] [/TR] [/TABLE] [TABLE] [TR] [TD][/TD] [TD=width: 15][/TD] [TD=width: 130]BugcheckParameter3[/TD] [TD]0xb9e15938[/TD] [/TR] [/TABLE] [TABLE] [TR] [TD][/TD] [TD=width: 15][/TD] [TD=width: 130]BugcheckParameter4[/TD] [TD]0x0[/TD] [/TR] [/TABLE] [TABLE] [TR] [TD][/TD] [TD=width: 15][/TD] [TD=width: 130]SleepInProgress[/TD] [TD]false[/TD] [/TR] [/TABLE] [TABLE] [TR] [TD][/TD] [TD=width: 15][/TD] [TD=width: 130]PowerButtonTimestamp[/TD] [TD]0[/TD] [/TR] [/TABLE] Da quel poco che ho capito dal tuo link pare proprio che sia stato colpa del cavo (anche il mio non sta tanto bene a causa della scrivania) Però se c'è un'interruzione di correnti perché deve fare la schermata blu e riavviarsi anziché spegnersi di botto? Quote Link to comment Share on other sites More sharing options...
tom1 Posted August 11, 2013 Share Posted August 11, 2013 pessimo alimentatore Quote Link to comment Share on other sites More sharing options...
micka Posted August 11, 2013 Share Posted August 11, 2013 perché probabilmente faceva contatto ma non bene e quindi, alimentava i componenti ma ,molto probabilmente non riusciva ad alimentare il pc quando veniva sollecitata più corrente (tipo quando ti mettevi a giocare o a fare cose più pesanti) ed allora andava in blue screen. altrimenti non si spiega. qualcuno che se ne intende di elettricità potrebbe dare un senso a tutto ciò. è l'unica spiegazione che mi è passata per la capoccia. comunque cerca di tenere il cavo dritto non storto - per tom1. se fosse colpa dell'ali gli avrebbe dato problemi sempre o no? Quote Link to comment Share on other sites More sharing options...
DanielV Posted August 11, 2013 Author Share Posted August 11, 2013 Che era un pessimo alimentatore già lo sapevo però ha sempre retto con i giochi pesanti. Se però mi consigliate di cambiarlo ho un power lc600h-12 da 600w in casa Quote Link to comment Share on other sites More sharing options...
micka Posted August 11, 2013 Share Posted August 11, 2013 sinceramente non so che dirti. se ha retto non vedo perchè cambiarlo. aspettiamo però qualcuno che se ne intende. Quote Link to comment Share on other sites More sharing options...
tom1 Posted August 12, 2013 Share Posted August 12, 2013 se non vuoi alla lunga rischiare altri problemi direi senza dubbio. Quote Link to comment Share on other sites More sharing options...
DanielV Posted August 12, 2013 Author Share Posted August 12, 2013 Quindi sarebbe meglio cambiare con il power lc600h? Tenendomi l'ali che ho ora, rischierei di fare danni all'hardware? Il power lc600h è abbastanza affidabile? Quote Link to comment Share on other sites More sharing options...
tom1 Posted August 12, 2013 Share Posted August 12, 2013 come wattaggio e un minimo di qualità in più dovrebbe garantirti meno problemi Quote Link to comment Share on other sites More sharing options...
DanielV Posted August 12, 2013 Author Share Posted August 12, 2013 Diamoci dentro con il cablaggio :cry:. Grazie ad entrambi! Quote Link to comment Share on other sites More sharing options...
micka Posted August 12, 2013 Share Posted August 12, 2013 (edited) è stato un piacere. Edited August 12, 2013 by micka Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.