pirus Posted February 9, 2011 Share Posted February 9, 2011 raga help me! Mi hanno attivato stamattina alice 20 mega! ho configurato cosi il router WAG320N in questione! Ho provato sia con rilevamento automatico on e off! ma la passante la becca al volo (supero i 18000 sulla spina principale) ma quando quando va a connettersi il mondo di internet diventa rosso e dopo 30 secondi si disconnette il led della portante e va in loop! portante attiva, led rosso di internet! Ho chiamato alla telecom e per loro è tutto ok e addirittura vedono il router collegato! Ho l'ultimo firmware, che potrebbe essere??? ecco i parametri! --- System Information --- Vendor: Linksys ModelName: WAG320N Firmware Version: 1.00.12 , 2010-03-22T10:51:43 Boot Version: 1.06 Hardware Version: 0.01 --- DSL Information --- DSL Driver Version: AnnexA version - A2pB023k.d21d DSL VPI/VCI: 8/35 DSL Status: Showtime DSL Mode: ADSL2+ DSL Channel: DSL Upstream Rate: 786 Kbps DSL Downstream Rate: 16995 Kbps Down up DSL Noise Margin: 12.3 dB 13.5 dB DSL Attenuation: 18.0 dB 3.1 dB DSL Transmit Power: 1.3 dBm 4.6 dBm --- Wireless Information --- Wireless Driver Version: 5.10.85.0.cpe4.402.4 Wireless Status: Enabled Wireless Wide Channel: 9 Wireless Standard Channel: 11- 2,462 GHz Wireless SSID: linksys --- Dynamic Information --- LAN Mac Address: 00:25:9C:82:11:5A WAN Mac Address: 00:25:9C:82:11:5C Wireless Mac Address: 00:25:9C:82:11:5B --- ed ecco l'errore Sat, 2000-01-01 00:00:22 - ioctl(s, SIOCGIFADDR, ...): No such device Sat, 2000-01-01 00:00:22 - Failed to get ip address for interface ppp0 Sat, 2000-01-01 00:00:51 - atm_backend_br2684_22 = 2-----ret_22 = 0 Sat, 2000-01-01 00:00:51 - Interface "nas0" created sucessfully Sat, 2000-01-01 00:00:51 - Communicating over ATM 0.8.35, encapsulation: LLC Sat, 2000-01-01 00:00:51 - Initialize LCP. Sat, 2000-01-01 00:00:51 - Plugin pppoe loaded. Sat, 2000-01-01 00:00:51 - PPPoE Plugin Initialized Sat, 2000-01-01 00:00:51 - Plugin pppoe called. Sat, 2000-01-01 00:00:51 - Enter: tdb_store. Sat, 2000-01-01 00:00:51 - tdb_store: calling tdb_update. Sat, 2000-01-01 00:00:51 - Enter: tdb_update. Sat, 2000-01-01 00:00:51 - pppd 2.4.1 started by root, uid 0 Sat, 2000-01-01 00:00:51 - Enter: tdb_store. Sat, 2000-01-01 00:00:51 - tdb_store: calling tdb_update. Sat, 2000-01-01 00:00:51 - Enter: tdb_update. Sat, 2000-01-01 00:00:51 - Enter: tdb_store. Sat, 2000-01-01 00:00:51 - tdb_store: calling tdb_update. Sat, 2000-01-01 00:00:51 - Enter: tdb_update. Sat, 2000-01-01 00:00:51 - Enter: tdb_store. Sat, 2000-01-01 00:00:51 - tdb_store: calling tdb_update. Sat, 2000-01-01 00:00:51 - Enter: tdb_update. Sat, 2000-01-01 00:00:51 - Enter: tdb_store. Sat, 2000-01-01 00:00:51 - tdb_store: calling tdb_update. Sat, 2000-01-01 00:00:51 - Enter: tdb_update. Sat, 2000-01-01 00:00:51 - Enter: tdb_store. Sat, 2000-01-01 00:00:51 - tdb_store: calling tdb_update. Sat, 2000-01-01 00:00:51 - Enter: tdb_update. Sat, 2000-01-01 00:00:51 - Sending PADI Sat, 2000-01-01 00:00:52 - Sending PADI 1... Sat, 2000-01-01 00:00:54 - Sending PADI 2... Sat, 2000-01-01 00:00:58 - Sending PADI 3... Sat, 2000-01-01 00:01:06 - Sending PADI 4... Sat, 2000-01-01 00:01:22 - Restart adsl... Sat, 2000-01-01 00:01:23 - Connecting PPPoE socket: 00:00:00:00:00:00 0000 0x1004e180 Sat, 2000-01-01 00:01:23 - Couldn't get channel number: Transport endpoint is not connected Sat, 2000-01-01 00:01:23 - Doing disconnect Sat, 2000-01-01 00:01:23 - sendto returned: Sat, 2000-01-01 00:01:23 - Exit. Non so più che fare... ho provato su tutte le spine di casa, su quella principale raggiungo i 19000, per la telecom è tutto ok! Help me! Quote Link to comment Share on other sites More sharing options...
tom1 Posted February 9, 2011 Share Posted February 9, 2011 Hai possibilità di provare un altro modem Quote Link to comment Share on other sites More sharing options...
pirus Posted February 9, 2011 Author Share Posted February 9, 2011 provato, sembra essere un problema della centrale! vediamo domani se risolvono! Quote Link to comment Share on other sites More sharing options...
tom1 Posted February 10, 2011 Share Posted February 10, 2011 provato, sembra essere un problema della centrale! vediamo domani se risolvono! Ok tienici informati Quote Link to comment Share on other sites More sharing options...
pirus Posted February 14, 2011 Author Share Posted February 14, 2011 problema alla centrale, ora va! Quote Link to comment Share on other sites More sharing options...
tom1 Posted February 15, 2011 Share Posted February 15, 2011 problema alla centrale, ora va! Perfetto,ogni tanto fanno i fetenti Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.