bCyclon Posted September 2, 2005 Share Posted September 2, 2005 Ecco il therad ufficiale dei dissipatori per cpu thermalright lista dissipatori XP - 120 specifiche * 120mm Recommended fan for maximum cooling capability * Multiple heatpipes for well spread heat around aluminum fins * Soldered fins to copper base (nickel plated) to make effective contact * Light weight and easy installation * Compatibility across multiple platforms (socket 478/754/939/940) * Enormous wingspan gives extra cooling to MOSFET or NB chipset Technical Spec.: Dimension: L110 x W125 x H63 (mm) Fin only, without fan (We'll update the dimension when mass production units come out if any deviations exist.) Weight: 370g (heat sink only) Recommended Fan Maker: Panaflo (Panasonic) Model: FBA12G12L1A Size: 120 x 120x 38 (mm) Bearing: Hydro Wave Voltage: 12V Speed: 1700 rpm Air Flow: 68.9 CFM Noise Level: 30.0dBA Weight: 270g (9.52 OZ ) XP - 90 specifiche * Multiple heatpipes for well spread heat around aluminum fins * Soldered fins to copper base (nickel plated) to make effective contact * Light weight and easy installation * Compatibility across multiple platforms (socket 478/754/939/940) * Enormous wingspan gives extra cooling to MOSFET or NB chipset Technical Spec.: Dimension: L116 x W96 x H75 (mm) Fin only, without fan L116 x W96 x H96 (mm) Fin only, with 25mm thick fan Weight: 360g (heat sink only) Recommended Fan Maker: Panaflo (Panasonic) Model: FBL09A12M Size: 92 x 92 x 25 (mm) Bearing: Hydro Wave Voltage: 12V Speed: 2450 rpm Air Flow: 48 CFM Noise Level: 30.0 dBA Weight: 110g (3.88 oz) XP - 90RT specifiche * Multiple heatpipes for well spread heat around aluminum fins * Soldered fins to copper base (nickel plated) to make effective contact * Light weight and easy installation * Compatibility across multiple platforms (socket 478/754/939/940) * Enormous wingspan gives extra cooling to MOSFET or NB chipset Technical Spec.: Dimension: L116 x W96 x H96 (mm) Fin only, with 25mm thick fan Weight: 360g (heat sink only) OEM Fan Size: 92 x 92 x 25 (mm) Bearing: Two ball Voltage: 12V Speed: 2400 rpm Air Flow: 44.79 CFM Noise Level: 35.0 dBA Weight: 70g XP - 90C specifiche * All copper design for maximum performance * Multiple heatpipes for well spread heat around copper fins * Soldered fins to copper base to make effective contact * Compatibility across multiple platforms (socket 478/754/775/939/940) * Enormous wingspan gives extra cooling to MOSFET or NB chipset Technical Spec.: Dimension: L116 x W96 x H75 (mm) Fin only, without fan L116 x W96 x H96 (mm) Fin only, with 25mm thick fan Weight: 690g (heat sink only) Recommended Fan Maker: Panaflo (Panasonic) Model: FBL09A12M Size: 92 x 92 x 25 (mm) Bearing: Hydro Wave Voltage: 12V Speed: 2450 rpm Air Flow: 48 CFM Noise Level: 30.0 dBA Weight: 110g (3.88 oz) SI - 97 specifiche * Multiple heatpipes for well spread heat around aluminum fins * Enormous wingspan gives extra cooling to surrounding components * Soldered fins to copper base (nickel plated) to make effective contact * Light weight and easy installation Technical Spec.: Dimension: L116 x W96 x H75 (mm) heatsink only, without fan Weight: 280g (heat sink only) Recommended Fan Maker: Panaflo (Panasonic) Model: FBL09A12M Size: 92 x 92 x 25 (mm) Bearing: Hydro Wave Voltage: 12V Speed: 2450 rpm Air Flow: 48 CFM Noise Level: 30.0 dBA Weight: 110g (3.88 oz) SI - 97A specifiche * Multiple heatpipes for well spread heat around aluminum fins * Enormous wingspan gives extra cooling to surrounding components * Soldered fins to copper base (nickel plated) to make effective contact * Light weight and easy installation Technical Spec.: Dimension: L116 x W96 x H75 (mm) heatsink only, without fan Weight: 280g (heat sink only) Recommended Fan Maker: Panaflo (Panasonic) Model: FBL09A12M Size: 92 x 92 x 25 (mm) Bearing: Hydro Wave Voltage: 12V Speed: 2450 rpm Air Flow: 48 CFM Noise Level: 30.0 dBA Weight: 110g (3.88 oz) SI - 9XV specifiche * Multiple heatpipes for well spread heat around aluminum fins * Soldered fins to copper base (nickel plated) to make effective contact * Light weight and easy installation * Optional passive cooling depending on system fan placement Technical Spec.: Dimension: L89 x W85 x H148 (mm), without fan Weight: 360g (heat sink only) Recommended Fan Maker: Panaflo (Panasonic) Model: FBL09A12M Size: 92 x 92 x 25 (mm) Bearing: Hydro Wave Voltage: 12V Speed: 2450 rpm Air Flow: 48 CFM Noise Level: 30.0 dBA Weight: 110g (3.88 oz) SI - 120 specifiche * 120mm Recommended fan for maximum cooling capability * Multiple heatpipes for well spread heat around aluminum fins * Soldered fins to copper base (nickel plated) to make effective contact * Light weight and easy installation * Compatibility across multiple platforms (socket 478/754/939/940) * Enormous wingspan gives extra cooling to MOSFET or NB chipset Technical Spec.: Dimension: L140 x W120 x H88 (mm) Fin only, without fan (We'll update the dimension when mass production units come out if any deviations exist.) Weight: 400g (heat sink only) Recommended Fan Maker: Panaflo (Panasonic) Model: FBA12G12L1A Size: 120 x 120x 38 (mm) Bearing: Hydro Wave Voltage: 12V Speed: 1700 rpm Air Flow: 68.9 CFM Noise Level: 30.0dBA Weight: 270g (9.52 OZ ) Quote Link to comment Share on other sites More sharing options...
Febry Posted September 2, 2005 Share Posted September 2, 2005 semplicemente meravigliosi!!!! Quote Link to comment Share on other sites More sharing options...
bCyclon Posted September 2, 2005 Author Share Posted September 2, 2005 semplicemente meravigliosi!!!! 1996[/snapback] belli vero.......ma io preferisco gli zalman, a poco arrivera' il thread pure degli zalman il bello dei thermalright e' ke sono passivi ma dissipano da dio si, hanno un ventolino sopra ma e' quel passivo ke fa' follie Quote Link to comment Share on other sites More sharing options...
miki8991 Posted September 8, 2005 Share Posted September 8, 2005 ankio preferisco zalman, almeno l'ho preferito fino ad ora... ma sento parlare molto bene dell'xp 120, volevo sapere se come x l'xp 90 c'è anke la versione tutto rame... sapete se c'è???? se si, sarebbe veramente 1 grande dissi, migliore anke dello zalman forse... Quote Link to comment Share on other sites More sharing options...
Febry Posted September 8, 2005 Share Posted September 8, 2005 si , solo che costano troppo .... Quote Link to comment Share on other sites More sharing options...
miki8991 Posted September 8, 2005 Share Posted September 8, 2005 quanto costa l'xp 120 tutto in rame...??? Quote Link to comment Share on other sites More sharing options...
miki8991 Posted September 8, 2005 Share Posted September 8, 2005 beh dai... ho guardatom i prezzi... costano come gli zalman + o -.... Quote Link to comment Share on other sites More sharing options...
gianni1879 Posted January 15, 2006 Share Posted January 15, 2006 Per me sono i migliori in assoluto, l'Xp 90c e' qualcosa di impressionante, sono rimasto scioccato quando ho aperto lo scatolo!!! na bestia:D Quote Link to comment Share on other sites More sharing options...
Kioji Posted January 15, 2006 Share Posted January 15, 2006 dici che in idle sei a 24° ....ma con l'Xp90-c e con il procio cloccato alla fine di un spi da 32mb a che temp arrivi? Quote Link to comment Share on other sites More sharing options...
gianni1879 Posted January 15, 2006 Share Posted January 15, 2006 con 1.52v e 3000mhz col opteron con superpippo arrivo circa 44/46 gradi, ma con S&M andiamo oltre, infatti e' per questo che ho deciso di cabriolettarlo;) Quote Link to comment Share on other sites More sharing options...
Febry Posted January 15, 2006 Share Posted January 15, 2006 mha....se sei sui 50 52 ° sotto S&M va piu' ceh bene...sei nella norma piu' completa...considera che stai sempre a 3000 mhz... Quote Link to comment Share on other sites More sharing options...
gianni1879 Posted January 17, 2006 Share Posted January 17, 2006 sotto S&M caricato a 100% arriva anche a 55 gradi non mi piace molto sta cosa, considerando che col winh per arrivare su queste temp dovevo dare oltre 1.65v!! Quote Link to comment Share on other sites More sharing options...
mmx85 Posted June 15, 2006 Share Posted June 15, 2006 Xp-120 non lo fanno in RAME, e già cosi è ottimo e costa, figuriamoci se l'avessero fatto in rame. Cmq io ho il SI - 120 con una ventola da pochi cfm e riesco a tenere il mio prescott @ 3,8GHz sotto i 45° in full, temp ambiente 25°. Quote Link to comment Share on other sites More sharing options...
Febry Posted June 15, 2006 Share Posted June 15, 2006 Xp-120 non lo fanno in RAME, e già cosi è ottimo e costa, figuriamoci se l'avessero fatto in rame. Cmq io ho il SI - 120 con una ventola da pochi cfm e riesco a tenere il mio prescott @ 3,8GHz sotto i 45° in full, temp ambiente 25°. bhe davvero notevole.... in settimana ci arrivano da testare tutti i thermalrigth...vedremo cosa ne viene fuori... Quote Link to comment Share on other sites More sharing options...
megthebest Posted June 15, 2006 Share Posted June 15, 2006 ma una comparativa dei modelli di punta thermalright , cooler master, zalman , thermaltake, artic .... si potrà avere un giorno ??? sempre se nn si cambia socket continuamente ciao Quote Link to comment Share on other sites More sharing options...
Lordh Posted June 15, 2006 Share Posted June 15, 2006 Bisognerebbe sentire quelli dei piani alti del forum ;D ;D "Naturalmente comunque sarebbe un ottima cosa perchè di dissi ottimi ce ne sono ma si è sempre troppo indecisi" Quote Link to comment Share on other sites More sharing options...
Febry Posted June 15, 2006 Share Posted June 15, 2006 ma una comparativa dei modelli di punta thermalright , cooler master, zalman , thermaltake, artic .... si potrà avere un giorno ??? sempre se nn si cambia socket continuamente ciao ci stiamo lavorando proprio adesso... in settimana arrivano i thermalrigth.... poi vedremo gli zalman e i coolermaster... e poi una bella comparativa finale.... era già tutto pianificato!! stay tuned Quote Link to comment Share on other sites More sharing options...
principino1984 Posted June 15, 2006 Share Posted June 15, 2006 era già tutto pianificato!! stay tuned deh, e un si frigge mica con l'acqua noi! Marco Quote Link to comment Share on other sites More sharing options...
megthebest Posted June 17, 2006 Share Posted June 17, 2006 grandi ragazzi ... vuol dire che vi stavo leggendo nel pensiero .. . Ottimo Lavoro ... continuate così ... chissà in un premio milgior sito dell'anno 2007 ??? Quote Link to comment Share on other sites More sharing options...
principino1984 Posted June 17, 2006 Share Posted June 17, 2006 grandi ragazzi ... vuol dire che vi stavo leggendo nel pensiero .. . Ottimo Lavoro ... continuate così ... chissà in un premio milgior sito dell'anno 2007 ??? beh sarebbe spettacolare...ma la vedo molto dura! su, finiamo l'OT Marco Quote Link to comment Share on other sites More sharing options...
megthebest Posted June 17, 2006 Share Posted June 17, 2006 una domanda ai + esperti ... come vedreste un si-120 su un prescott 478 s 3Ghz ...al posto del boxato che fa un casino del diavolo ?? che ventola ci si dovrebbe montare su ? costo del tutto ?? scusate , ma ve lo chiedo perchè un conoscente mi sta spaccando i marr***i perchè il pc è un inferno e la ventola gira a 6000rpm.. grazie Max Quote Link to comment Share on other sites More sharing options...
principino1984 Posted June 17, 2006 Share Posted June 17, 2006 verei che saresti ai livelli di un discreto sitema a liquido Imho! E basterebbe una bella ventolozza da 12 silenziosa senza troppe pretese che staresti tranquillissimo anche con oc abbastanza spinti... Marco Quote Link to comment Share on other sites More sharing options...
gianni1879 Posted June 17, 2006 Share Posted June 17, 2006 io ho il tr xp90-c una bestia ma con voltaggi elevati cmq non riesce a tenere a bada il mio opt, che lo dico sempre ma che ancora non ho fatto detto cabriolettare.... Quote Link to comment Share on other sites More sharing options...
Febry Posted June 18, 2006 Share Posted June 18, 2006 beh sarebbe spettacolare...ma la vedo molto dura! su, finiamo l'OT Marco esiste come premio??? :P Quote Link to comment Share on other sites More sharing options...
Febry Posted June 19, 2006 Share Posted June 19, 2006 oggi mi e' arrivato QUALCHE dissi de sta marca...... ehm...... :coolsmiley: a presto con al prima rece! ghghgh > AMDCLOKERS RULEZZZZZZZZZZZZZZZZZZZZZZZZZ Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.