duball Posted August 15, 2008 Share Posted August 15, 2008 non vuole salire sotto phase ad aria boh .... AI O/C Tuner = Manual CPU Ratio Control = Manual Ratio CMOS Setting = 9x FBS Strap to North Bridge = AUTO FBS Frequency = 500 PCIE Frequency = 100 DRAM Frequency = DDR3-1601MHz DRAM Command Rate = 2T DRAM Timing Control = Manual CAS# Latency = 7 RAS# to CAS# Relay = 7 RAS# Precharge = 7 RAS# Active Time = 20 RAS# to RAS# Delay = Auto Row Refresh Cycle Time = Auto Write Recovery Time = Auto Read to Precharge Time = Auto Write Recovery Time = Auto Read to Precharge Time = Auto Read to Write Delay (S/D) = Auto Write to Read Delay (S) = Auto Write to Read Delay (D) = Auto Read to Read Delay (S) = Auto Read to Read Delay (D) = Auto Write to Write Delay (S) = Auto Write to Write Delay (D) = Auto DRAM Static Read Control = Disabled DRAM Synamic Write Control = Disabled Ai Clock Twister = Auto Ai Clock Skew for Channel A = Auto Ai Clock Skew for Channel B = Auto Ai Transaction Booster = Auto CPU Voltage = 1.55000 CPU PLL Voltage = Auto FBS Termination Voltage = Auto DRAM Voltage = 1.850 North Bridge Voltage = 1.51 South Bridge Voltage = Auto Clock Over-Charging Voltage = Auto CPU Voltage Damper = Disabled CPU Voltage Reference = Auto North Bridge Voltage Reference = Auto CPU Spread Spectrum = Disabled PCIE Spread Spectrum = Disabled CPU Ratio Control = Manual Ratio CMOS Setting = 10 C1E Support = Disabled CPU TM Function = Disabled Vanderpool Technology = Enabled Execute Disable Bit = Disabled Max CPUID Value Limit = Disabled dram clk skew on channel a1 / a2 ......... auto dram static read control ............disabled dram dynamic write control.............auto dram rad training ................auto dram write training ....................auto mem oc charger ............. auto execut disable bit ......disabled questi sono i parametri gli ultimi non li conosco Quote Link to comment Share on other sites More sharing options...
PcBoost Posted August 15, 2008 Share Posted August 15, 2008 scusa ma ke dissi hai????e poi 500x9 nn è pokino sai!!!! Quote Link to comment Share on other sites More sharing options...
duball Posted August 15, 2008 Author Share Posted August 15, 2008 sono sotto phase ... Quote Link to comment Share on other sites More sharing options...
duball Posted August 15, 2008 Author Share Posted August 15, 2008 tweaker= manual cpu fsb ratio= 7.5 fsb=500 pcie=100 cpuv=1.40 cpu gtl ref 0/3 .63 cpu gtl ref 1/4 .67 pllv=1.68 fsb term v= 1.38 nb v=1.26 mem v=1.9 pcie/sata v= 1.5 EVERYTHING else auto Quote Link to comment Share on other sites More sharing options...
Le085 Posted August 15, 2008 Share Posted August 15, 2008 quindi non ti ale oltre i 500 di fsb? hai provato ad alzare il molti? certo che con un po' di sfortuna potrebbe volere + volt... Quote Link to comment Share on other sites More sharing options...
duball Posted August 15, 2008 Author Share Posted August 15, 2008 adesso ho trovato il 1303 non so se é lo stesso o cosa che ho tirato giu dal sito ma cmq provo ....pazienza Quote Link to comment Share on other sites More sharing options...
duball Posted August 15, 2008 Author Share Posted August 15, 2008 (edited) tutto su auto 6x550 li fa va in windows cosi al primo tentativo poi crasha Edited August 15, 2008 by duball Quote Link to comment Share on other sites More sharing options...
Totocellux Posted August 15, 2008 Share Posted August 15, 2008 tweaker= manualcpu fsb ratio= 7.5 fsb=500 pcie=100 -> 101 cpuv=1.40 cpu gtl ref 0/3 .63 cpu gtl ref 1/4 .67 pllv=1.68 -> 1.50 fsb term v= 1.38 -> 1.40 nb v=1.26 -> 1.40 mem v=1.9 pcie/sata v= 1.5 EVERYTHING else auto prova con queste modifiche Quote Link to comment Share on other sites More sharing options...
duball Posted August 16, 2008 Author Share Posted August 16, 2008 (edited) non va ho seguito le istruzioni del manuale ma niente nemmeno con quelle ... l unico modo con cui sembra andare é tutto su auto 6x560 1,4v arrivo a 580x6 con tutto su auto adesso ho messo 9x500 con 1.58v tutto su auto e sta girando un 3dm06 ... Edited August 16, 2008 by duball Quote Link to comment Share on other sites More sharing options...
PcBoost Posted August 16, 2008 Share Posted August 16, 2008 cmq vada è molto strano....la mia nn ha mai fatto tt qst storie....io 450x9 li facevo tranquillamente mi ricordo e ero a liquido......poi nn ebbi il tempo di tirarla xk mi si ruppe l'ali e quindi anke la cpu...peccato....era con la sigla sfigata ma nn era male...era nella norma....la tua sigla della cpu qual'è???? Quote Link to comment Share on other sites More sharing options...
PcBoost Posted August 16, 2008 Share Posted August 16, 2008 sicuramente qll può incidere notevolmente...anke s nn fino a qst livelli Quote Link to comment Share on other sites More sharing options...
Le085 Posted August 16, 2008 Share Posted August 16, 2008 hai provato a mettere il molti a 10 o 11? puoi farlo no? Quote Link to comment Share on other sites More sharing options...
duball Posted August 17, 2008 Author Share Posted August 17, 2008 allora ho risolto tutto ..... :D:D:D con un po di fortuna ho cominciato da zero lasciando tutto su auto e cambiando solo il fsb e il vcore sono quindi arrivato a 580x6 da bios con 1.43v ripeto tutto su auto ................ dopo cio ho solo cambiato moltiplicatore messo a 9x e abbassato il fsb ..... i risultati migliori che ho ottenuto sono il 3dm06/05/01 a 9x550 4950mhz Quote Link to comment Share on other sites More sharing options...
duball Posted August 17, 2008 Author Share Posted August 17, 2008 dopodiche ho montato il qx9650 e con le stesse impo a 12x400 non chiudeva il 06 con 1.75v ram tutto su auto tranne la frequenza a 14xx per cui cl alto ...poi ho provato 11x435 4785mhz e ho chiuso il 06/05/01/03 ( tutto in pratica ) ma oltre non riesco ad andare 11x435 da bios poi con setfsb fino a 4950 con 1,75v il 3dm06/05 gli unici che ho provato si interrompono .... cmq ecco uno screen che é anche il mio rekord personale al 3dm06 fatto stamattina .... le ram sono su 14xx mhz cl su auto penso cl8 o 9 qx9650 11x435 4785mhz ... ati 3870x2 891/1017mhz ... cell 12800 14xxmhz clauto Quote Link to comment Share on other sites More sharing options...
Le085 Posted August 17, 2008 Share Posted August 17, 2008 bene, col molti più alto riesci a salire ancora un po'---sarà un po' limitato di fsb il qx...:( l'8400 invece sale molto bene con 1,43 mi sembra un buon result...cmq dallo screen vedo che lì il vcore era 1,73...con 1,43 fin dove sei arrivato? Quote Link to comment Share on other sites More sharing options...
duball Posted August 17, 2008 Author Share Posted August 17, 2008 beh col qx con 1,63v chiudeva il 06 a 4800 sulla blackops 12x400 ... con l 8400 a 1,43v arrivi piu o meno a 4200 mhz stabili sulla rampage formula Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.