nico88 Posted October 26, 2012 Share Posted October 26, 2012 Ho impostato questi valori. Cpu ratio: all core all core: 42 spread spectrum: disabled Internal PLL overvoltage: disabled Intel speedstep tech: enabled Intel turbo boost: enabled Additional turbo voltage: +0.012v long duration power limit: 250 short duration power limit: 250 primary plane current limit: 250 secondary plane current limit: 250 gt overclocking: disabled Dram frequency: 1600mhz Dram timing: 9-9-9-24 Cpu offset voltage: +0.005v cpu loadline calibration: level 3 dram voltage: 1.5v pll voltage: 1.7v Schermata advanced/cpu configuration c1e: enabled c3/c6 support: disabled intel virtualization tech: disabled Dopo 10 run di ibt le temperature dei core sono rispettivamente 66, 74,73,64. Come mai a riposo il core speed va sempre a 4.2 e non a 1.6? Quote Link to comment Share on other sites More sharing options...
tom1 Posted October 27, 2012 Share Posted October 27, 2012 perchè hai settato il cpu ratio al massimo. Quote Link to comment Share on other sites More sharing options...
nico88 Posted October 27, 2012 Author Share Posted October 27, 2012 Cosa devo settare per fare in modo che a riposo mi vada a 1.6? Ora sono a provare il 4.5 se sono stabile posto lo screen e i valori impostati dal bios Quote Link to comment Share on other sites More sharing options...
tom1 Posted October 27, 2012 Share Posted October 27, 2012 scusami ma perchè vuoi portarlo a 1.6 ? Quote Link to comment Share on other sites More sharing options...
Tex Posted October 27, 2012 Share Posted October 27, 2012 Credo intenda che quando èa riposo vada a 1600... Lascia i risparmi energetici attivi. Quote Link to comment Share on other sites More sharing options...
tom1 Posted October 27, 2012 Share Posted October 27, 2012 no invece credo che lui voglia a 4.5 quando è in full è in idle a 1.6 Quote Link to comment Share on other sites More sharing options...
nico88 Posted October 27, 2012 Author Share Posted October 27, 2012 Il risparmio energetico sarebbe il power saving mode? Quote Link to comment Share on other sites More sharing options...
Tex Posted October 27, 2012 Share Posted October 27, 2012 Si mi son spiegato male.scusatemi, Quote Link to comment Share on other sites More sharing options...
tom1 Posted October 27, 2012 Share Posted October 27, 2012 si , ma inizia a disattivare anche il turbo mode Quote Link to comment Share on other sites More sharing options...
nico88 Posted October 27, 2012 Author Share Posted October 27, 2012 Se l'offset lo metto a valori negativi cosa succede? Oppure è meglio impostare fixed mode invece che offset? Quote Link to comment Share on other sites More sharing options...
tom1 Posted October 27, 2012 Share Posted October 27, 2012 l'offset serve a diminuire il volt core. Quote Link to comment Share on other sites More sharing options...
nico88 Posted October 27, 2012 Author Share Posted October 27, 2012 Sto provando queste impostazioni: Cpu ratio: all core all core: 44 spread spectrum: disabled Internal PLL overvoltage: disabled Intel speedstep tech: enabled Intel turbo boost: enabled Additional turbo voltage: +0.004 long duration power limit: auto short duration power limit: auto primary plane current limit: auto secondary plane current limit: auto gt overclocking: disabled Dram frequency: 1600mhz Dram timing: 9-9-9-24 Cpu offset voltage: -0.060 cpu loadline calibration: level 3 dram voltage: 1.5v pll voltage: 1.586v Schermata advanced/cpu configuration c1e: enabled c3/c6 support: disabled intel virtualization tech: disabled Per ora dopo 3 di 10 di ibt è ancora stabile Quote Link to comment Share on other sites More sharing options...
nico88 Posted October 27, 2012 Author Share Posted October 27, 2012 Ecco gli screen con le ultime impostazioni Quote Link to comment Share on other sites More sharing options...
nico88 Posted October 28, 2012 Author Share Posted October 28, 2012 Tra la modalità offset e quella fixed del cpu voltage qual'è la migliore? Quote Link to comment Share on other sites More sharing options...
Tex Posted October 28, 2012 Share Posted October 28, 2012 Io personalmentw vado sempre.di offset, preferisco.. Trovo meglio il giusto compromesso. Quote Link to comment Share on other sites More sharing options...
principe andry Posted October 28, 2012 Share Posted October 28, 2012 Dai un'occhiatina alla guida -> click ciao Quote Link to comment Share on other sites More sharing options...
nico88 Posted October 31, 2012 Author Share Posted October 31, 2012 Nell'ultima versione del bios presente sul sito, sono compresi anche tutti gli aggiornamenti delle versioni precedenti del bios? Quote Link to comment Share on other sites More sharing options...
tom1 Posted October 31, 2012 Share Posted October 31, 2012 si diciamo cosi. Quote Link to comment Share on other sites More sharing options...
nico88 Posted November 3, 2012 Author Share Posted November 3, 2012 Ho aggiornato un bios alla volta. Finalmente dopo un piccolo periodo di pausa si torna a fare oc. Provo i 4.5 ghz con questi valori Cpu ratio: all core core1: 45 core2: 45 core3: 45 core4: 45 spread spectrum: disabled Internal PLL overvoltage: disabled Intel speedstep tech: enabled Intel turbo boost: disabled gt overclocking: disabled Dram frequency: 1600mhz Dram timing: 9-9-9-24 Cpu offset voltage: +0.030v cpu loadline calibration: level 3 dram voltage: 1.5v pll voltage: 1.7v Schermata advanced/cpu configuration c1e: enabled c3/c6 support: disabled intel virtualization tech: disabled Quote Link to comment Share on other sites More sharing options...
Timon85 Posted November 4, 2012 Share Posted November 4, 2012 Nico a mio parere toglierei lo speedstep intel xchè in alcuni casi puó causare instabilità... Quote Link to comment Share on other sites More sharing options...
Le085 Posted November 4, 2012 Share Posted November 4, 2012 Ho aggiornato un bios alla volta. Finalmente dopo un piccolo periodo di pausa si torna a fare oc. Provo i 4.5 ghz con questi valori Cpu ratio: all core core1: 45 core2: 45 core3: 45 core4: 45 spread spectrum: disabled Internal PLL overvoltage: disabled Intel speedstep tech: enabled Intel turbo boost: disabled gt overclocking: disabled Dram frequency: 1600mhz Dram timing: 9-9-9-24 Cpu offset voltage: +0.030v cpu loadline calibration: level 3 dram voltage: 1.5v pll voltage: 1.7v Schermata advanced/cpu configuration c1e: enabled c3/c6 support: disabled intel virtualization tech: disabled abbassa il pll, se eri stabile con 1,586 a 4,4 non c'è motivo di alzarlo per i 4,5. Semmai serve solo un pelo di vcore in più, temperature permettendo Quote Link to comment Share on other sites More sharing options...
nico88 Posted November 4, 2012 Author Share Posted November 4, 2012 (edited) abbassa il pll, se eri stabile con 1,586 a 4,4 non c'è motivo di alzarlo per i 4,5.Semmai serve solo un pelo di vcore in più, temperature permettendo Ho riprovato i 4.4 senza avere il turbo attivo e per essere stabile ho dovuto modificare i parametri rispetto al precedente: Cpu offset voltage: -0.030v cpu loadline calibration: level 3 dram voltage: 1.5v pll voltage: 1.701v Il Vcore oscilla tra i 1.208 e 1.216 con temperatura massima di 80° Ho provato i 4.5 per poco con: Cpu offset voltage: -0.010v cpu loadline calibration: level 3 dram voltage: 1.5v pll voltage: 1.701v Il Vcore durante ibt varia tra 1.232 e 1.240. Come temperature per ora sono al massimo a 86°. Domani posterò gli screen. Avrei delle domande 1) Cosa posso modificare nei settaggi per migliorare le impostazioni sia per i 4.4 che per i 4.5? 2) Come mai il Cpu offset voltagelo devo mettere negativo per avere un Vcore basso? Edited November 4, 2012 by nico88 Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.