Lupo Posted July 2, 2007 Author Share Posted July 2, 2007 oggi fa molto caldo! ottimo per fare un bel test particolarmente stressante @ 2500MHz!!! Quote Link to comment Share on other sites More sharing options...
dj883u2 Posted July 2, 2007 Share Posted July 2, 2007 oggi fa molto caldo! ottimo per fare un bel test particolarmente stressante @ 2500MHz!!! Attendo nuove!:n2mu: Ciao;) Quote Link to comment Share on other sites More sharing options...
Lupo Posted July 2, 2007 Author Share Posted July 2, 2007 per adesso solo un paio di sessioni di gioco a TDU ho visto al massimo 51°C, magari stase faccio un altro giretto con Orthos... Quote Link to comment Share on other sites More sharing options...
Lupo Posted July 2, 2007 Author Share Posted July 2, 2007 mmmm, mi sa che per tenere i 2500 devo alzare un po' la vcore, dopo circa un'ora mi si è bloccato tutto: avevo Orthos, msn, internet con almeno 6 finestre aperte... e basta mi pare... comunque le temperature erano sempre tra i 50 ed i 51°C quindi niente male penso... Quote Link to comment Share on other sites More sharing options...
Lupo Posted July 3, 2007 Author Share Posted July 3, 2007 arrivate le ram: Â Xtreem TeamGroup ddr500 2x1Gb 3-3-2-8 2,6-2,8v dovrebbero avere chip Infineon.... le devo ancora montare... vediamo un po' come si comportano... Quote Link to comment Share on other sites More sharing options...
dj883u2 Posted July 3, 2007 Share Posted July 3, 2007 Ottime ram. Complimenti! Ciao;) Quote Link to comment Share on other sites More sharing options...
Lupo Posted July 3, 2007 Author Share Posted July 3, 2007 uff!!! mi stanno facendo buttare un bel po' di sangue ste ram!!! @250 non riesco a tenere i timings standard!!! com'è possibile??? @240 tutto ok, ma @250 Orthos mi da errore!!!! :-( Quote Link to comment Share on other sites More sharing options...
dj883u2 Posted July 3, 2007 Share Posted July 3, 2007 uff!!! mi stanno facendo buttare un bel po' di sangue ste ram!!! @250 non riesco a tenere i timings standard!!! com'è possibile??? @240 tutto ok, ma @250 Orthos mi da errore!!!! :-( Che voltaggio gli hai dato? Ciao;) Quote Link to comment Share on other sites More sharing options...
Lupo Posted July 3, 2007 Author Share Posted July 3, 2007 ho provato sia 2,75 che 2,8, non mi sono spinto oltre... Quote Link to comment Share on other sites More sharing options...
dj883u2 Posted July 3, 2007 Share Posted July 3, 2007 ho provato sia 2,75 che 2,8, non mi sono spinto oltre... Dagli 2.65V. Ciao;) Quote Link to comment Share on other sites More sharing options...
Lupo Posted July 3, 2007 Author Share Posted July 3, 2007 Dagli 2.65V.Ciao;) Â 2,65??? dici di scendere??? le temperature sono basse!!! a toccarle sono fresche, neanche tiepide... ci ho messo una ventola davanti... comunque adesso sto facendo un test sulla cpu... poi provo con 2,65... Quote Link to comment Share on other sites More sharing options...
dj883u2 Posted July 3, 2007 Share Posted July 3, 2007 2,65??? dici di scendere??? le temperature sono basse!!! a toccarle sono fresche, neanche tiepide... ci ho messo una ventola davanti... comunque adesso sto facendo un test sulla cpu... poi provo con 2,65... Diciamo che le ram sono testate x andare da 2.6V a 2.85V. Potrebbe essere che vanno meglio con 2.6/2.65V. Prova. Ciao;) Quote Link to comment Share on other sites More sharing options...
Lupo Posted July 3, 2007 Author Share Posted July 3, 2007 2,65 come prima... ora sto provando 2,6... Quote Link to comment Share on other sites More sharing options...
dj883u2 Posted July 3, 2007 Share Posted July 3, 2007 2,65 come prima... ora sto provando 2,6... M lanci il Blend di Orthos? Ciao;) Quote Link to comment Share on other sites More sharing options...
Lupo Posted July 3, 2007 Author Share Posted July 3, 2007 intendi questo??? Â Type: Blend - stress CPU and RAM Min: 8 Max: 4096 InPlace: No Mem: 1791 Time: 15 CPU: 2250MHz FSB: 250MHz [250MHz x 9.0 est.] 03/07/2007 22:59 Launching 1 thread... Using CPU #0 Beginning a continuous self-test to check your computer. Press Stop to end this test. Test 1, 4000 Lucas-Lehmer iterations of M19922945 using 1024K FFT length. FATAL ERROR: Rounding was 0.5, expected less than 0.4 Hardware failure detected, consult stress.txt file. Torture Test ran 0 minutes 59 seconds - 1 errors, 0 warnings. Execution halted. Quote Link to comment Share on other sites More sharing options...
dj883u2 Posted July 4, 2007 Share Posted July 4, 2007 intendi questo??? Type: Blend - stress CPU and RAM Min: 8 Max: 4096 InPlace: No Mem: 1791 Time: 15 CPU: 2250MHz FSB: 250MHz [250MHz x 9.0 est.] 03/07/2007 22:59 Launching 1 thread... Using CPU #0 Beginning a continuous self-test to check your computer. Press Stop to end this test. Test 1, 4000 Lucas-Lehmer iterations of M19922945 using 1024K FFT length. FATAL ERROR: Rounding was 0.5, expected less than 0.4 Hardware failure detected, consult stress.txt file. Torture Test ran 0 minutes 59 seconds - 1 errors, 0 warnings. Execution halted. Seleziona: Large, in-place FFSTs - stress some ram. E dimmi se ti da errore. Ciao;) Quote Link to comment Share on other sites More sharing options...
Lupo Posted July 5, 2007 Author Share Posted July 5, 2007 Type: Large, in-place FFTs - stress some RAM Min: 128 Max: 1024 InPlace: Yes Mem: 8 Time: 15 CPU: 2250MHz FSB: 250MHz [250MHz x 9.0 est.] 05/07/2007 12:48 Launching 1 thread... Using CPU #0 Beginning a continuous self-test to check your computer. Press Stop to end this test. Test 1, 4000 Lucas-Lehmer iterations of M19922945 using 1024K FFT length. Test 2, 4000 Lucas-Lehmer iterations of M19922943 using 1024K FFT length. Test 3, 4000 Lucas-Lehmer iterations of M19374367 using 1024K FFT length. Test 4, 4000 Lucas-Lehmer iterations of M19174369 using 1024K FFT length. Test 5, 4000 Lucas-Lehmer iterations of M18874369 using 1024K FFT length. Self-test 1024K passed! Test 1, 4500 Lucas-Lehmer iterations of M17432577 using 896K FFT length. Test 2, 4500 Lucas-Lehmer iterations of M17432575 using 896K FFT length. Test 3, 4500 Lucas-Lehmer iterations of M17115073 using 896K FFT length. Test 4, 4500 Lucas-Lehmer iterations of M16815071 using 896K FFT length. FATAL ERROR: Rounding was 0.5, expected less than 0.4 Hardware failure detected, consult stress.txt file. Torture Test ran 28 minutes 59 seconds - 1 errors, 0 warnings. Execution halted. Â Â che vuol dire??? il procio arriva tranquillamente a 2500 con le ram a 480... che sia la mobo??? Quote Link to comment Share on other sites More sharing options...
apix_1024 Posted July 5, 2007 Share Posted July 5, 2007 Type: Large, in-place FFTs - stress some RAM Min: 128 Max: 1024 InPlace: Yes Mem: 8 Time: 15CPU: 2250MHz FSB: 250MHz [250MHz x 9.0 est.] 05/07/2007 12:48 Launching 1 thread... Using CPU #0 Beginning a continuous self-test to check your computer. Press Stop to end this test. Test 1, 4000 Lucas-Lehmer iterations of M19922945 using 1024K FFT length. Test 2, 4000 Lucas-Lehmer iterations of M19922943 using 1024K FFT length. Test 3, 4000 Lucas-Lehmer iterations of M19374367 using 1024K FFT length. Test 4, 4000 Lucas-Lehmer iterations of M19174369 using 1024K FFT length. Test 5, 4000 Lucas-Lehmer iterations of M18874369 using 1024K FFT length. Self-test 1024K passed! Test 1, 4500 Lucas-Lehmer iterations of M17432577 using 896K FFT length. Test 2, 4500 Lucas-Lehmer iterations of M17432575 using 896K FFT length. Test 3, 4500 Lucas-Lehmer iterations of M17115073 using 896K FFT length. Test 4, 4500 Lucas-Lehmer iterations of M16815071 using 896K FFT length. FATAL ERROR: Rounding was 0.5, expected less than 0.4 Hardware failure detected, consult stress.txt file. Torture Test ran 28 minutes 59 seconds - 1 errors, 0 warnings. Execution halted. Â Â che vuol dire??? il procio arriva tranquillamente a 2500 con le ram a 480... che sia la mobo??? Â che strano... prova S&M con il suo test sulla ram. se il procio arriva a 2,5ghz allora qualcosina non piace alla scheda mamma... le ram dovrebbero andare cavolo, sono garantite per quello... cambia programma di test. fai un bel memtest e S&M e dicci:nonno: Quote Link to comment Share on other sites More sharing options...
Lupo Posted July 5, 2007 Author Share Posted July 5, 2007 mmmm ok, proverò a fare questi test, comunque, una volta che Orthos mi ha dato quell'errore sono andato avanti ad usare il pc ed il sistema ha crashato... quindi non penso che sia un problema di Orthos troppo severo... :-(  ho provato a far salire la cpu e questi sono i risultati:   non so come mai mi metta ancora quel voltaggio!!! ho dovuto alzarlo un po' rispetto ai 1,45 ,ma avevo messo tipo 1,46 1,47 non 1,53, mi pare!!! vabbuò dopo controllo... comunque avevi ragione apix, appena salgo un po' coi volt scalda come una piccola stufetta... dovrò studiarmi un buon compromesso tra temperature e clock...anche perchè con questa ultima config ogni tanto mi portava la ventola al massimo, e dava fastidio come rumore... Quote Link to comment Share on other sites More sharing options...
Lupo Posted July 5, 2007 Author Share Posted July 5, 2007 ho fatto girare memtest, e subito all'inizio, quello di destra, mi ha dato 8 errori di questo tipo:   che vvo ddì???? :boh: Quote Link to comment Share on other sites More sharing options...
Lupo Posted July 5, 2007 Author Share Posted July 5, 2007 mi spiegate questa??? Â Â io volevo controllare la vram... dite che quella nb sia la vram??? io da bios ho impostato 2,8... comunque 2,94 mi sembra altino!!!! :o :o Quote Link to comment Share on other sites More sharing options...
Lupo Posted August 22, 2007 Author Share Posted August 22, 2007 qualunque fsb io imposti oltre i 300MHz mi da sempre 301,4!!!! :( anche se imposto 350MHz e passa (usando moltiplicatori più bassi di 9x) mi da sempre 301,4... come mai??? è una limitazione della mobo??? :cry: :cry: :cry: io volevo prendere i 3 GHz!!!! Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.