massimo66 Posted May 8, 2012 Share Posted May 8, 2012 ciao a tutti, all'avvio del pc, mi viene questa scritta floppy disckette seek failure, il pc non è dotato di floppy e nel bios mi viene indicato come non presente. non so dove mettere mano nel bios grazie per qualsiasi consiglio Quote Link to comment Share on other sites More sharing options...
tom1 Posted May 8, 2012 Share Posted May 8, 2012 ciao passa a presentarti qui Presentazione nuovi utenti poi prova con un clear cmos ovvero togliere per poco la batteria tampone sulla scheda madre Quote Link to comment Share on other sites More sharing options...
massimo66 Posted May 8, 2012 Author Share Posted May 8, 2012 ciao grazie per la risposta, già provato a togliere la batteria tampone, ma il problema persiste. Quote Link to comment Share on other sites More sharing options...
tom1 Posted May 8, 2012 Share Posted May 8, 2012 quindi anche caricando le impostazioni di default da bios rimane ? Quote Link to comment Share on other sites More sharing options...
massimo66 Posted May 8, 2012 Author Share Posted May 8, 2012 quindi anche caricando le impostazioni di default da bios rimane ? qua non sono sicuro di aver fatto la procedura giusta. penso di averlo fatto ma non essendo molto esperto non tocco tanto dentro il bios. so che il bios mi ha dato un bip lungo. non so se mi sono spiegato. al limite dopo questa ti fai una risata. ciao Quote Link to comment Share on other sites More sharing options...
tom1 Posted May 8, 2012 Share Posted May 8, 2012 premi f2 o canc e nell'ultima pagine dovresti avere la voce load default settings cliccala e dopo save and exit Quote Link to comment Share on other sites More sharing options...
massimo66 Posted May 8, 2012 Author Share Posted May 8, 2012 ok provo poi ti faccio sapere ciao Quote Link to comment Share on other sites More sharing options...
tom1 Posted May 8, 2012 Share Posted May 8, 2012 nel caso posta una foto della scheda madre sul nostro hosting XtremeShack.com - Free Image Hosting by XtremeHardware Quote Link to comment Share on other sites More sharing options...
massimo66 Posted May 8, 2012 Author Share Posted May 8, 2012 nel caso posta una foto della scheda madre sul nostro hosting XtremeShack.com - Free Image Hosting by XtremeHardware risolto grazie. ho fatto quello che mi hai detto, poi nella sezione driver del bios ho messo of sul floppy. grazie di tutto Quote Link to comment Share on other sites More sharing options...
tom1 Posted May 8, 2012 Share Posted May 8, 2012 ottimo Quote Link to comment Share on other sites More sharing options...
massimo66 Posted May 8, 2012 Author Share Posted May 8, 2012 quindi anche caricando le impostazioni di default da bios rimane ? si rimane caricando le impostazioni du default, probabilmente perchè la gamma dei dell gx620 comprende qualche modello con floppy, questo è un mini pc se si chamano cosi. e nei driver va selezionato off su floppy, perche di default è internal. spero che si capisca Quote Link to comment Share on other sites More sharing options...
tom1 Posted May 8, 2012 Share Posted May 8, 2012 si, si capisce . Quote Link to comment Share on other sites More sharing options...
massimo66 Posted May 8, 2012 Author Share Posted May 8, 2012 ottimo Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.