Jump to content

DC2

Members
 View Profile  See their activity

  • Posts

    390

  • Joined

  • Last visited

 Content Type 

Posts posted by DC2

    [Thread Ufficiale] EVGA X58 SLI Classified

    in Schede Madri & RAM

    Posted · Edited by DC2

    BIOS: E760S61J

    RS @201x21

    Core i7 920 D0

    gskill Trident 1600MHz Cas 6

     

     

    BIOS TEMPLATE

     

     

    Frequency/Voltage Control

     

    - DUMMY OC : Disabled

    - Extreme Cooling : Disabled

    - CPU Clock Ratio : 20x (21x Turbo ON)

    - CPU Host Frequency (MHz) : 201

    - MCH STRAP : Auto

    - CPU UnCore Frequency : 3221 (MHz) 16x

    - CPU Clock Skew : 0 ps

    - Spread Spectrum : Disabled

    - PCIE Frequency (MHz) : 101 MHz

    - OC Recovery : Disabled

    CPU Feature

    - Intel Speed Step : Disabled

    - Turbo Mode Function : Enabled

    - CxE Function : Disabled

    - Execute Disabled Bit : Disabled

    - Virtualization Technology : Disabled

    Logical Processor Setting

    - Intel HD Technology : Enabled

    - Active Processor Core : ALL

    QPI Controller Setting

    - QPI Controll Setting : Enabled

    - QPI Link Fast Mode : Enabled

    - QPI Frequency Selection : 4.800GT/s

    Memory Feature

    - Memory SPD : Standard 1

    - Memory Control Setting : Enabled

    - Memory Frequency : 2:8 - 1604Mhz

    - Channel Interleave Setting : 6 way

    - Rank Interleave Setting : 4 way

    - Memory low gap : 2,5GB

    Voltage Control

    - EVGA VDrop Control : without VDroop

    - CPU Vcore : 1.26875v (Dipende dalla vostra CPU)

    - CPU VTT Voltage : +100mv

    - CPU PLL Vcore : 1.800v

    - IOH PLL Vcore : 1.800v (1.820v)

    - QPI PLL Vcore : 1.300v

    - DIMM Voltage : 1.650v

    - DIMM DQ VREF : +0mv

    - IOH Vcore : 1.200v

    - IOH/ICH I/0 Voltage : 1.550v

    - ICH Vcore : 1.050v

    - VTT PWM Frequency : 370KHz

    - CPU PWM Frequency : 940KHz

    - CPU Impedance : Less

    - QPI Signal Compensation : Less

     

    20100120171649_4.2GHz.jpg

     

     

     

    BIOS: E760S61J

    TEST @221x21

    Core i7 920 D0

    gskill Trident 1600MHz Cas 6

     

     

    BIOS TEMPLATE

     

     

    Frequency/Voltage Control

     

    - DUMMY OC : Disabled

    - Extreme Cooling : Disabled

    - CPU Clock Ratio : 20x (21x Turbo ON)

    - CPU Host Frequency (MHz) : 221

    - MCH STRAP : Auto

    - CPU UnCore Frequency : 3541 (MHz) 16x

    - CPU Clock Skew : 0 ps

    - Spread Spectrum : Disabled

    - PCIE Frequency (MHz) : 101 MHz

    - OC Recovery : Disabled

    CPU Feature

    - Intel Speed Step : Disabled

    - Turbo Mode Function : Enabled

    - CxE Function : Disabled

    - Execute Disabled Bit : Disabled

    - Virtualization Technology : Disabled

    Logical Processor Setting

    - Intel HD Technology : Enabled

    - Active Processor Core : ALL

    QPI Controller Setting

    - QPI Controll Setting : Enabled

    - QPI Link Fast Mode : Enabled

    - QPI Frequency Selection : 4.800GT/s

    Memory Feature

    - Memory SPD : Standard 1

    - Memory Control Setting : Enabled

    - Memory Frequency : 2:8 - 1770 MHz

    - Channel Interleave Setting : 6 way

    - Rank Interleave Setting : 4 way

    - Memory low gap : 2,5GB

    Voltage Control

    - EVGA VDrop Control : without VDroop

    - CPU Vcore : 1.38750v

    - CPU VTT Voltage : +200mv

    - CPU PLL Vcore : 1.800v

    - IOH PLL Vcore : 1.800v

    - QPI PLL Vcore : 1.400v

    - DIMM Voltage : 1.700v

    - DIMM DQ VREF : +0mv

    - IOH Vcore : 1.300v

    - IOH/ICH I/0 Voltage : 1.650v

    - ICH Vcore : 1.050v

    - VTT PWM Frequency : 490KHz

    - CPU PWM Frequency : 1210KHz

    - CPU Impedance : Less

    - QPI Signal Compensation : Less

     

    20100120173510_4.6GHz.jpg

     

     

     

    Se il mio sistema è stabile non è detto che lo sia anche il vostro.. allego questa guida affinchè riusciate ad individuare il problema dei famosi BSOD O0

     

     

     

    DIAGNOSI ERRORI BSODs

     

     

    BSOD "IRQL_NOT_LESS_THAN_OR_EQUAL" (Conflitto hardware)

    BSOD 101 "Clock Interrupt not received from Secondary Processor" Provare ad aumentare il VCore

    BSOD 124 "general hardware failure" Provare ad aumentare il VTT

    Attempted Write To Readonly Memory (stop code 0X000000BE)

    Bad Pool Caller (stop code 0X000000C2)

    Data Bus Error (stop code 0X0000002E)

    Driver IRQL Not Less Or Equal (stop code 0X000000D1)

    Driver Power State Failure (stop code 0X0000009F)

    Driver Unloaded Without Cancelling Pending Operations (stop code 0X000000CE)

    Driver Used Excessive PTEs (stop code 0X000000D8)

    Hardware Interrupt Storm (stop code 0X000000F2)

    Inaccessible Boot Device (stop code 0X0000007B)

    Kernel Data Inpage Error (stop code 0X0000007A)

    Kernel Stack Inpage Error (stop code 0X00000077)

    Kmode Exception Not Handled (stop code 0X0000001E)

    Mismatched Hal (stop code 0X00000079)

    No More System PTEs (stop code 0X0000003F)

    NTFS File System (stop code 0X00000024)

    Page Fault In Nonpaged Area (stop code 0X00000050)

    Status Image Checksum Mismatch (stop code 0Xc0000221)

    Status System Process Terminated (stop code 0Xc000021A)

    Thread Stuck In Device Driver (stop code 0X000000EA)

    Unexpected Kernel Mode Trap (stop code 0X0000007F)

    Unmountable Boot Volume (stop code 0X000000ED)

     

    20100120173956_101_BSOD.jpg

    BSOD 101 "Clock Interrupt not received from Secondary Processor" Di solito basta Aumentare il VCore

     

    20100120174556_124_BSOD.jpg

    BSOD 124 "general hardware failure" Provate ad aumentare il VTT

     

     

    NB: Se in OC Windows vi da l'errore Kernel-Processor-Power (Event 35):

    Performance power management features on processor 1 in group 0 are disabled due to a firmware problem. Check with the computer manufacturer for updated firmware.

    Provate ad abilitare l'Intel Speed Step !

    Capita anche di avete strani riavvii, bsod, ecc (o comunque degli errori inerenti al firmware..).

    Se avete dei dubbi potete controllare gli errori andando su "Run" (Esegui/Start+R), eventvwr. :)

    [Thread Ufficiale] EVGA X58 SLI Classified

    in Schede Madri & RAM

    Posted · Edited by DC2

    Molti di voi avranno notato che al primo avvio il Display Code della mobo (E760) non rimane fisso su FF...

    Se anche voi avete questo "problema" basta che disabilitate la voce "P80 Show CPU Temp" (grazie a dj883u2 per la dritta O0 )

     

     

    Consiglio su come impostare il Bios (nel mio caso con il Raid0):

     

     

     

    Advanced Bios Features:

     

    - Hard Disk boot Priority> 1.SCSI-0 : Intel Volume0 (RAID Mode)

    - First boot Device : Hard Disk

    - Second boot Device : Disabled

    - Third boot Device : Disabled

    - Boot other device : Enabled

    - Boot Up Numlock Status : ON

    - Security Option : Setup

    - Full Screen Logo Show : Enabled/Disabled

     

    Integrated Peripherals:

     

    - Onboard PATA/SATA Device: > RAID (RAID Mode)

    - JMB 362 SATA Controller : Disabled

    - JMB 363 SATA/PATA Controller : Disabled

    - JMB 363 Mode : Raid (RAID Mode)

    - JMB 362 Mode : Raid (RAID Mode)

     

    Onboard Device:

     

    Realtek GigaLan 1: Disabled/Enabled

    Realtek GigaLan 2: Disabled/Enabled

    PE4 Slot: Disabled

    Realtek Lan PXE Boot Rom: Disabled

    TI 1394 Setting: Disabled

    High Definition Audio: Enabled

    P80 Show CPU temp: Disabled

     

    Power Management Setup:

     

    - ACPI Function : enabled

    - ACPI Sospend Type : S1 (POS)

    - Soft-Off by PWP-BTTN : Instant Off

    - Wake-Up by PCI Card : Enabled

    - Resume Alarm : Disabled

    - Power On Function : Disabled

    - PWRON After PWR-Fail : Off

     

    PnP/PCI Configurations:

     

    - Init Display First : PCI-E

    - Reset Configuration Data : Disabled

    - Resources Controlled by : Disabled

    - PCI/VGA Palette Snoop : Disabled

    - INT Pin 1/8 Assignment : Auto

    - MAXIMUM PAYload Size : 128

     

     

     

     

    INTRODUZIONE OVERCLOCK

     

     

     

    BIOS: E760S61J

    RS @191x21

    Core i7 920 D0

    gskill Trident 1600MHz Cas 6

     

    BIOS TEMPLATE

     

    Frequency/Voltage Control

     

    - DUMMY OC : Disabled

    - Extreme Cooling : Disabled

    - CPU Clock Ratio : 20x (21x Turbo ON)

    - CPU Host Frequency (MHz) : 191

    - MCH STRAP : Auto

    - CPU UnCore Frequency : 3061 (MHz) 16x

    - CPU Clock Skew : 0 ps

    - Spread Spectrum : Disabled

    - PCIE Frequency (MHz) : 101 MHz

    - OC Recovery : Disabled

    CPU Feature

    - Intel Speed Step : Disabled

    - Turbo Mode Function : Enabled

    - CxE Function : Disabled

    - Execute Disabled Bit : Disabled

    - Virtualization Technology : Disabled

    Logical Processor Setting

    - Intel HD Technology : Enabled

    - Active Processor Core : ALL

    QPI Controller Setting

    - QPI Controll Setting : Enabled

    - QPI Link Fast Mode : Enabled

    - QPI Frequency Selection : 4.800GT/s

    Memory Feature

    - Memory SPD : Standard 1

    - Memory Control Setting : Enabled

    - Memory Frequency : 2:8 - 1530Mhz

    - Channel Interleave Setting : 6 way

    - Rank Interleave Setting : 4 way

    - Memory low gap : 2,5GB

    Voltage Control

    - EVGA VDrop Control : without VDroop

    - CPU Vcore : 1.20625v (Dipende dalla vostra CPU)

    - CPU VTT Voltage : +75mv (+100mv)

    - CPU PLL Vcore : 1.800v

    - IOH PLL Vcore : 1.800v (1.820v)

    - QPI PLL Vcore : 1.300v

    - DIMM Voltage : 1.610v (1.650)

    - DIMM DQ VREF : +0mv

    - IOH Vcore : 1.200v

    - IOH/ICH I/0 Voltage : 1.550v

    - ICH Vcore : 1.050v

    - VTT PWM Frequency : 370KHz

    - CPU PWM Frequency : 940KHz

    - CPU Impedance : Less

    - QPI Signal Compensation : Less

     

    20100120170829_4GHz.jpg

    [Thread Ufficiale] EVGA X58 SLI Classified

    in Schede Madri & RAM

    Posted · Edited by DC2

    INSTRUCTIONS: BIOS updating can be accomplished VIA one of the below methods:

     

     

    e_bullet.gifCD Method (Blank CD and CD Rewritable Drive Required)

    - Download the following .iso file: E760_S61J.iso .

    - Use CD Burning software to burn the .iso image onto a blank CD (Nero, Alochol 120%, MagicISO etc.).

    - After it has burned, insert CD and restart the machine, go into the BIOS and load defaults, save and exit.

    - Now set the CD Drive as the primary boot device, or press escape while the system is booting to select CD as the bootable device.

    - After flash remove the CD, and power off PC Completely.

    - Turn on the PC and load defaults in BIOS

    e_bullet.gifUSB FLOPPY (Floppy Disk and Disk Drive Required)

    - Download the following executable: E760_S61J.exe .

    - Insert blank floppy disk into drive and run executable.

    - Now set the USB Floppy as the primary boot device, or press escape while the system is booting to select USB Floppy as the bootable device.

    - After flash remove the floppy, power off PC Completely.

    - Turn on the PC and load defaults in BIOS.

    e_bullet.gifUSB Flash Drive Installation

    Download E760S61J.bin.

    Visit this thread and follow the installation instructions.

     

    Rendere Bootable la Pendrive USB:

     

    Scaricare l'HP Usb Storage Format Tool v2.1.8 free download e Win98boot.zip

     

    Scompattate il .rar dov'è contenuta l'Utility HP e installatela..

    Una volta installata cliccate con il tasto destro e aprite come amministratore.

     

    Ora scompattate anche l'archivio di destinazione "win98boot" e incollatelo sul desktop (lo potete incollare dove volete non è importante).

     

    Torniamo al programmino HP, mettete la spunta su: "Quick Format", "Create a DOS startup disk" e "using DOS system files located at:".

     

     

     

     

    hpusbstorage1.th.jpg

     

     

     

    Ora gli dovete far vedere la cartella di destinazione : "win98boot".

     

     

     

    hpusbstorage2.th.jpg

     

     

     

     

    Come compare questo messaggio date la conferma.

     

     

     

    hpusbstorage4.th.jpg

     

     

     

     

    hpusbstorage5.th.jpg

     

     

     

     

    Ora la vostra chiavetta USB è pronta all'uso O0

     

     

     

    Se volete flashare il bios inserite nella pendrive l'AWDFLASH e il BIOS.bin. e via con lo shut down..

    Cosa importantissima.. mi raccomando prima del flash fate un cmos !!!!

    Ora dopo il cmos avviate il pc e premete "esc".. ora vi trovate davanti ad una schermata nera con delle scritte che termina in "C:/", ora subito dopo scrivete : AWDFLASH (spazio) NOMEBIOS.bin (es: AWDFLASH E760S61J.bin), vi chiederà se volete salvare il vecchio bios, confermate e aspettate che il flash sia andato a buon fine..

    Premete F1 per riavviare..

     

    Buon divertimento O0

     

     

     

     

    Database BIOS :

     

     

     

    e_bullet.gifE76074.bin

    e_bullet.gif E76073.bin

    e_bullet.gif E76064.bin

    e_bullet.gif E76059.bin

    e_bullet.gifE76051.bin

    e_bullet.gifE76049.bin

    e_bullet.gifE76044.bin

     

     

    e_bullet.gifE760S61J.bin

    e_bullet.gifE760S61H.bin

    e_bullet.gifE760S61D.bin

    e_bullet.gifE760S61B.bin

    e_bullet.gifE760S61A.bin

    e_bullet.gifE760S618.bin

    e_bullet.gifE760S615.bin

    e_bullet.gifE760S610.bin

     

     

     

     

     

     

    e_bullet.gif74 Updates:

     

    • Corrects 15x uncore multi shown as 16x in BIOS with Intel 980X

    e_bullet.gif73 Updates:

    • Added TRL setting to assist with memory compatibility while overclocking

    e_bullet.gif64 Updates:

     

    • Adds 1.5x uncore support for B1 CPU
    • Adds number of GPUs detected at bootup
    • Adds RC/AC setting in memory timings

    e_bullet.gif59 Updates:

     

    • Removes shutdown action when enabling Virtualization Technology
    • Sets ICH Voltage to 1.1v as Default

     

     

    e_bullet.gif 49 Updates:

     

    • Removes shutdown action when enabling Virtualization Technology
    • Sets ICH Voltage to 1.1v as Default

    e_bullet.gif 44 Updates:

     

    • Supports 32nm Desktop CPUs
    • Added "Turbo Performance" option (may boost performance if enabled)
    • Fixes 1866MHz Memory Ratio

    e_bullet.gif S61J Updates:

    • Added "Reserve RC for Bridge" - Enables resources for 5 VGA's
    • Added High Precision Event Timer
    • Disables PS2 keyboard in device manager if no PS2 keyboard present

    e_bullet.gif S61H Updates:

    • Adds support for 2TB Partitions (DATA)

    e_bullet.gif S61D Updates:

    • Increased Shadow Memory in DOS for PXE
    • Improved USB Support

    e_bullet.gif S61B Updates:

    • Restores Bootup Logo
    • Maximum Payload for PCIE
    • SMART Fan Temperatures from 0 to 100c

    e_bullet.gif S61A Updates:

    • Improves Bootup BClock
    • Adds B2B CAS Delay

    e_bullet.gif S618 Beta Updates:

    • Updates smart fan function between low and high threshold
    • Increase high temp threshold lower limit for smartfan
    • Improves bootup BCLCK
    • Turbo mode bug fixed
    • USB option display issue corrected
    • Changes default clockgen PCIe mode

    e_bullet.gif S615 Beta Updates:

    • Smartfan is listed by temp they are adjusted to
    • PXE fix with RAID enabled
    • Improves bootup BCLK
    • Improves 24GB support
    • Smartfan improvements

    e_bullet.gif S610 Updates:

    • Improves support for Intel Xeon CPU's
    • Fixes Smart Fan S3 Resume
    • Adds additional option for QPI Signal
    • S3 Resume Improvements

    [Thread Ufficiale] EVGA X58 SLI Classified

    in Schede Madri & RAM

    Posted · Edited by DC2

    THREAD UFFICIALE

     

    EVGA X58 SLI CLASSIFIED

     

     

     

     

    20100120143856_X58_Classified_no_1920x1200.jpg

     

     

     

     

    20100120144154_MagicZoom_lg.jpg

     

     

     

    e_bullet.gif Specification and Performance

     

     

    Performance

    blt_subnav.gif Based on Intel X58/ICH10R chipset

    blt_subnav.gif Supports Intel Core i7 Processors

    blt_subnav.gif 133 Mhz QPI

    Memory

    blt_subnav.gif 6 x 240-pin DIMM sockets

    blt_subnav.gif Triple Channel DDR3

    blt_subnav.gif Maximum of 24GB of DDR3 1600MHz+

    Expansion Slot

    blt_subnav.gif 4 x PCIe x16/x8, 1 x PCIe x1

    blt_subnav.gif 1 x 32-bit PCI, support for PCI 2.1

    Storage I/O

    blt_subnav.gif 1 x UltraDMA133

    blt_subnav.gif 9 x Serial ATA 300MB/sec with support for RAID 0, RAID1, RAID 0+1, RAID5, JBOD

    Integrated Peripherals

    blt_subnav.gif 8 Channel High Definition

    blt_subnav.gif 2 x 10/100/1000

    Multi I/O

    blt_subnav.gif 1 x PS2 Keyboard

    blt_subnav.gif 12 x USB2.0 ports (8 external + 4 internal headers)

    blt_subnav.gif Audio connector (Line-in, Line-out, MIC)

    blt_subnav.gif FireWire 1394A (1 external, 1 header)

    Form Factor

    blt_subnav.gif EATX Form Factor

    blt_subnav.gif Length: 12in – 304.8mm

    blt_subnav.gif Width: 10.375in – 263.5mm

    Notes:

    The ULTIMATE in X58 motherboards is here! The EVGA X58 Classified raises the bar for enthusiast grade motherboards everywhere.

     

    With never before seen features such as 3-way SLI + PhysX + 1x PCIe device on a single board, 2 8pin +12V connectors capable of delivering 600 watts of power, 10 phase Digital PWM with a switching frequency of up to 1333KHz, three times the amount of normal gold content in the CPU socket and much, much more.

     

    The EVGA X58 Classified motherboard is engineered for those who demand more than just the best!

     

     

     

    20100120153428_evgax58classified.jpg

     

     

     

     

     

    e_bullet.gifDownload PDF Spec Sheet 141-BL-E760-A1

     

    Aspettando Fermi ......

    in GPU & Overclock

    Posted

    bè fai conto che io sono fanboy Nvidia in modo esagerato eppure voglio ATI.

    comunque io aspetto il 15-18 gennaio poi se non esce ancora nulla......SONO COSTRETTO A PRENDERE ATI visto che non mi offrono l'alternativa.

     

    Quoto ! O0

    ..anch'io preferisco nvidia (anche se onestamente ATi non l'ho mai provata sul mio pc), ma se continuano con questi ritardi la scimmia mi costringe a cambiare sponda :asd:

    Aspettando Fermi ......

    in GPU & Overclock

    Posted

    o mio Dio!!!

    Gabriellì...benvenuto tra noi!!! O0

     

    no caro...sempre e solo i soliti rumors e ipotesi...di "certo" come detto mi sa che fino a marzo sapremo poco nulla...

     

    Grazie Luchì :)

    Comunque ce la stanno nascondendo per bene sta scheda.. boh, io comunque aspetto altri 2 mesi e se fanno ancore ste finte mi butto su ATi :perfido:

     

    Ps. Complimenti e auguri per il nuovo grado O0

×
×
  • Create New...