Mod’n Roll 2012: The Theory of Everything.

Robymetallo95

yeah

and the DNA illuminated with blue leds looks like really good

Angel OD

tom1 ha scritto:

nice cut

Robymetallo95 ha scritto:

yeah
and the DNA illuminated with blue leds looks like really good

Thanks guys! I must admit I'm pretty happy about it too!

Which is also why I decided to take the protective film off!

Just wanted to show you how the 240 radgrill looked without protective coating. It was pretty stupid of me to put the thing in, as I still need to cut out another window, but I just had to see!

Not too bad if you ask me!

Right now I'm drawing up a sketch of the electronics for the dvd-drive. Ph.d. student at work owes me a favor for machining some parts for a homemade quad-copter, and I'm cashing in!

Next up is to make a plate to cover the PSU, and cut an extra hole in the side. Also a hole in the other side and one in the top part of the case. So much to do, so much time wasted on BF3 with my new gfx card! :lol:

tom1

the result is very nice

Angel OD

tom1 ha scritto:

the result is very nice

Thank you very much!

I was not really happy with the smd led's, but I found out I only had 7.6v on them, so I tried with a 12v charger. That made a world of difference!

I also made a design of the PSU cover, as I hope it's going to look!

thanks!

tom1

for me is a great result with these led, the result is beatiful thank to great cut of plexy

One1ros

The PSU top with the periodic table is simply brilliant!

Angel OD

tom1 ha scritto:

for me is a great result with these led, the result is beatiful thank to great cut of plexy

Thanks a lot!

I'm really happy about the DNA grills. Some of the best I've ever done in my oppinion!

One1ros ha scritto:

The PSU top with the periodic table is simply brilliant!

Thanks! I really hope it's going to be as great as the renders show!

Angel OD

I guess it's about time for another update.

I didn't get much done as most I need is going to be milled on the cnc, and we have had different setups sitting in it the last couple of weeks. Hope to get some done during the week/next weekend.

But I do have a small update though. I made the PSU cover:

Still needs a bit of tweaking, but all in all I think it's going to be good!

C ya soon guys! :thumb:

tom1

very good impression this covered

One1ros

Waiting for the PSU top!

Angel OD

tom1 ha scritto:

very good impression this covered

Thanks a lot. I think it's gonna be as good as it looks!

One1ros ha scritto:

Waiting for the PSU top!

SO am I! :asd:

I just need to have the machine for a couple of days straight, but vacation is coming up, so I hope to finish that in a week or 2!

Angel OD

Sorry for leaving you waiting guys. It's been hectic at work and I've been pondering a lot about the mod. But now I'm ready to go again!

On with the show, pictures is what you wan't!

I milled a hole in the side for the 120mm radgrill:

This is (almost/kind of) where the dvd-drive is going to be placed.

I need to mill the in the top and make some more stuff for it.

Right now I've got a couple of my ph.d. homies in Electrical Engineering working on a controller board that will be used for the drive, and the motor.

More on that when it's done. Should be within a week or 2! :clap:

Since all the plugs are hidden underneath the PSU cover plate, I need outlets for usb/audio/RJ45 and the GFX. These will be placed next to the 120 radgrill.

Setup:

Milled:

I encountered a problem with the radgrill, since It's pretty far to the side AND the bottom of the side plate. I had to dremel that away:

Done:

Then I had to round the corners of the radgrill. 4mm radius, and the gauge to use as a template for filing down the corners:

Done:

It looks crooked, but it's just because it's not glued in place so it fell back.

Then I received the last of the cables needed. 4 usb's and 1 rj45 that are made for panel mount. The GFX cable is actually a splitter, so I need to make something to mount it. Not many options out there for a 5 inch cable for DVI :lol:

That's it for now. I hope to get led's in the 120 radgrill today, and finish the design of the cable outlet plate. I'll post pics later if I get it done!

Until then my fellow modders! :thumb:

tom1

well , waiting for next pics

Angel OD

tom1 ha scritto:

well , waiting for next pics

Here you go!

I designed the plate for the In / out connections. It's gonna look something like this:

Then on to cutting and soldering the led's, and then mount them:

And it works:

Ran to the bathroom as that's the only place I have that's dark during the day! :lol:

This is on a drained 9v battery, so I think with 12v it's going to light up the entire country of Denmark!

And in daylight:

There we go. I might go to the workshop tomorrow again, but not sure.

C ya soon anyways!

One1ros

Very good work, man!

tom1

Quote

Angel OD

One1ros ha scritto:

Very good work, man!

tom1 ha scritto:

Quote

Thanks a lot guys!

I was going to do a piece today, but unfortunately I got called up to do a co-worker a favor so I didn't have time to finish it. Just pulled if from the cnc, so it still needs some filing and some holes. I'll get it done friday!

But I decided to put it in here, just as a kind of a teaser:

C ya friday with yet an update!

tom1

Angel OD

tom1 ha scritto:

Ty!

I had to cut it short today. But I have the next 10 days off, so some progress is to be expected!

But it is indeed a GFX backplate:

I don't know exactly what went wrong in measuring, but I had to take a bit off of the corner of the GFX pcb. No problems though, it's just PCB!

Sorry for the short update, I'll be back during the weekend with more!

I also bought some fittings. I was supposed to redo some myself, but they were on sale and for less than $1 a piece for these - Looking that good, there was no way I neede to do that!

I should be going to the workshop tomorrow, so hopefully yet an update shall be here by then!

tom1

WOW fantastic integration