Mod’n Roll 2012: Hi-Tek armoured case
-
More pieces using the same materials and techniques , this time for the top of the case
Drawing
Cut
Edges cut in angle
Finish using rotary tool and sand paper by hand
Some pictures in different points of view of a case-top preview
-
very nice design
-
Thanks !!! ^^
-
-
Beautiful.
-
news
-
New updates
After a lot of fails , material and different process test`s , finally I get some good results.
Stop wood work and try something else
Real use of the wood pieces , vaccum forming
cut of the single pieces
I choose to make the pieces one-by-one because all of the fail was trying to make entire panels , it can be done , but I don't like the quality of the results
Preview , I hope to get better quality in the final pieces
To make this pieces , I have to build my own home-made vacuum forming machine , that explain the lack of updates
-
fantastic update man , very impressive work log
-
Diegojavbau ha scritto:
To make this pieces , I have to build my own home-made vacuum forming machine , that explain the lack of updates
What?! That's insane!
-
Thx !!!!!
There the pictures of the vacuum forming home made "machine" that I made for this project
I make the heather with 5 lamps of of 1200w , same that came in this
I can't get the correct creamic terminal to conect the lamps , so I use crocodiles until I get it
Aluminium frame and panels on MDF
Elements
Construccion
Mounted on MDF
Test
Picture of the heater near the vaccum box ( there is no secrets there , is just a MDF box with 2 holes for 2 vacuum's and A LOT of small holes at the top panel )
Test video (sorry for the bad quality and the lack of edition) , turn down the speaker volume before I turn on the vacuum
-
crazy bu amazing creation
-
ma perchè le notifiche di questa discussione mi arrivano nella posta indesiderata?
-
RIC3 ha scritto:
ma perchè le notifiche di questa discussione mi arrivano nella posta indesiderata?:cheazz: I don't kow ...
-
Thanks for the video, Now I understand how it works.
-
[FASE 2: Preparazione alla votazione] 15 Giugno - 22 Giugno
A fine concorso ogni utente avrà una settimana di tempo per presentare le foto o i video finali del proprio progetto per le votazioni, ogni utente potrà postare un massimo di 4 foto e 2 video per mod, tali foto rappresenteranno l'ultimo post del worklog e saranno quindi seguite dai ringraziamenti agli sponsor in caso di sponsorizzazione.
[Phase 2: Preparing to vote] June 15th to June 22nd
At the end of the contest each user will have a week to present the photos or videos of his final project to the vote, users can post up to 4 photos and 2 videos for each mod, these photos represent the last post of the worklog and then will be followed by thanks to the sponsors in the event of sponsorship.
-
Sadly I will not finish the whole project in a week
, but I keep working 
Keep going with the vacuum forming pieces , both side panels done.
Preparing for copy the main side panel piece , the more complicated
Good for me
A couple of images with different points of view to evaluate the quality result
All the pieces together as a preview
Next the top panel and start painting the pieces .
-
Great! And we'll keep following you!
-
Ciao! Sembra che tu sia interessato a questa conversazione, ma non hai ancora un account.
Stanco di dover scorrere gli stessi post a ogni visita? Quando registri un account, tornerai sempre esattamente dove eri rimasto e potrai scegliere di essere avvisato delle nuove risposte (tramite email o notifica push). Potrai anche salvare segnalibri e votare i post per mostrare il tuo apprezzamento agli altri membri della comunità.
Con il tuo contributo, questo post potrebbe essere ancora migliore 💗
Registrati Accedi