Mod’n Roll 2012: Hi-Tek armoured case

[tom1]

fantastic update man , very impressive work log

[One1ros]

Diegojavbau ha scritto:

To make this pieces , I have to build my own home-made vacuum forming machine , that explain the lack of updates

What?! That's insane!

[Diegojavbau]

Thx !!!!!

There the pictures of the vacuum forming home made "machine" that I made for this project

I make the heather with 5 lamps of of 1200w , same that came in this

I can't get the correct creamic terminal to conect the lamps , so I use crocodiles until I get it

Aluminium frame and panels on MDF

Elements

Construccion

Mounted on MDF

Test

Picture of the heater near the vaccum box ( there is no secrets there , is just a MDF box with 2 holes for 2 vacuum's and A LOT of small holes at the top panel )

Test video (sorry for the bad quality and the lack of edition) , turn down the speaker volume before I turn on the vacuum

[tom1]

crazy bu amazing creation

[RIC3]

ma perchè le notifiche di questa discussione mi arrivano nella posta indesiderata?

[Diegojavbau]

RIC3 ha scritto:

ma perchè le notifiche di questa discussione mi arrivano nella posta indesiderata?

:cheazz: I don't kow ...

[One1ros]

Thanks for the video, Now I understand how it works.

[One1ros]

[FASE 2: Preparazione alla votazione] 15 Giugno - 22 Giugno

A fine concorso ogni utente avrà una settimana di tempo per presentare le foto o i video finali del proprio progetto per le votazioni, ogni utente potrà postare un massimo di 4 foto e 2 video per mod, tali foto rappresenteranno l'ultimo post del worklog e saranno quindi seguite dai ringraziamenti agli sponsor in caso di sponsorizzazione.

 

[Phase 2: Preparing to vote] June 15th to June 22nd

At the end of the contest each user will have a week to present the photos or videos of his final project to the vote, users can post up to 4 photos and 2 videos for each mod, these photos represent the last post of the worklog and then will be followed by thanks to the sponsors in the event of sponsorship.

[Diegojavbau]

Sadly I will not finish the whole project in a week , but I keep working

Keep going with the vacuum forming pieces , both side panels done.

Preparing for copy the main side panel piece , the more complicated

Good for me

A couple of images with different points of view to evaluate the quality result

All the pieces together as a preview

Next the top panel and start painting the pieces .

[One1ros]

Great! And we'll keep following you!

[One1ros]

Qui trovate la classifica finale! Here the final ranking!