Mod’n Roll 2012: Hi-Tek armoured case

[Diegojavbau]

One1ros ha scritto:

That's art!

Thanks !!!

Le085 ha scritto:

Very nice!

Do you think the MDF will rise the internal temperature of the cabinet?

Thanks , The cabinet will have two 12cm fans at the top taking out the hot air , 2 in the side panel and 1 more in the front blowing fresh air inside , temperatures will not be a problem.

MDF will not affect the final result , as you will see later

[Diegojavbau]

More pieces using the same materials and techniques , this time for the top of the case

Drawing

Cut

Edges cut in angle

Finish using rotary tool and sand paper by hand

Some pictures in different points of view of a case-top preview

[tom1]

very nice design

[Diegojavbau]

Thanks !!! ^^

[tom1]

[One1ros]

Beautiful.

[tom1]

news

[Diegojavbau]

New updates

After a lot of fails , material and different process test`s , finally I get some good results.

Stop wood work and try something else

Real use of the wood pieces , vaccum forming

cut of the single pieces

I choose to make the pieces one-by-one because all of the fail was trying to make entire panels , it can be done , but I don't like the quality of the results

Preview , I hope to get better quality in the final pieces

To make this pieces , I have to build my own home-made vacuum forming machine , that explain the lack of updates

[tom1]

fantastic update man , very impressive work log

[One1ros]

Diegojavbau ha scritto:

To make this pieces , I have to build my own home-made vacuum forming machine , that explain the lack of updates

What?! That's insane!

[Diegojavbau]

Thx !!!!!

There the pictures of the vacuum forming home made "machine" that I made for this project

I make the heather with 5 lamps of of 1200w , same that came in this

I can't get the correct creamic terminal to conect the lamps , so I use crocodiles until I get it

Aluminium frame and panels on MDF

Elements

Construccion

Mounted on MDF

Test

Picture of the heater near the vaccum box ( there is no secrets there , is just a MDF box with 2 holes for 2 vacuum's and A LOT of small holes at the top panel )

Test video (sorry for the bad quality and the lack of edition) , turn down the speaker volume before I turn on the vacuum

[tom1]

crazy bu amazing creation

[RIC3]

ma perchè le notifiche di questa discussione mi arrivano nella posta indesiderata?

[Diegojavbau]

RIC3 ha scritto:

ma perchè le notifiche di questa discussione mi arrivano nella posta indesiderata?

:cheazz: I don't kow ...

[One1ros]

Thanks for the video, Now I understand how it works.

[One1ros]

[FASE 2: Preparazione alla votazione] 15 Giugno - 22 Giugno

A fine concorso ogni utente avrà una settimana di tempo per presentare le foto o i video finali del proprio progetto per le votazioni, ogni utente potrà postare un massimo di 4 foto e 2 video per mod, tali foto rappresenteranno l'ultimo post del worklog e saranno quindi seguite dai ringraziamenti agli sponsor in caso di sponsorizzazione.

 

[Phase 2: Preparing to vote] June 15th to June 22nd

At the end of the contest each user will have a week to present the photos or videos of his final project to the vote, users can post up to 4 photos and 2 videos for each mod, these photos represent the last post of the worklog and then will be followed by thanks to the sponsors in the event of sponsorship.

[Diegojavbau]

Sadly I will not finish the whole project in a week , but I keep working

Keep going with the vacuum forming pieces , both side panels done.

Preparing for copy the main side panel piece , the more complicated

Good for me

A couple of images with different points of view to evaluate the quality result

All the pieces together as a preview

Next the top panel and start painting the pieces .

[One1ros]

Great! And we'll keep following you!

[One1ros]

Qui trovate la classifica finale! Here the final ranking!