Tarantula Posted April 2, 2008 Share Posted April 2, 2008 Un pò di immagini Un po di dati... # Quad BIOS for an extended level of protection # Supports Intel® Core™ 2 multi-core and 45nm processors # Support for 1600 MHz FSB # Dual PCI-E 2.0 x16 graphics interfaces with ATI CrossFireX™ support for extreme gaming performance # DDR2 1200 memory with Intel® ECC technology featuring faster speeds and higher data bandwidth # Quad-Triple phase power design for ultimate system stability # Features SATA 3Gb/s with Quad eSATA 2 interface # Dual Gigabit Ethernet LAN with Teaming functionality # High speed Gigabit Ethernet with Green design for power consumption # ALC889A with DTS Connect enables high quality Full Rate Lossless Audio and support for both Blu-ray and HD DVD # High quality CPU power module with Ferrite Core Chokes, Lower RDS (on) MOSFETs and Lower ESR Solid Capacitors # Revolution energy saving design with GIGABYTE Dynamic Energy Saver(DES) technology Processore * 1600/1333/1066/800 MHz FSB * LGA775 * Intel® Core™ 2 Extreme/ Intel® Core™ 2 Quad/ Intel® Core™ 2 Duo/ Intel Pentium Extreme Edition/ Intel® Pentium D/ Intel® Pentium 4 Extreme Edition/ Intel® Pentium 4/ Intel® Celeron * L2 cache varies with CPU Chipset * Intel® X48 * Intel® ICH9R * iTE IT8718 * Realtek 8111B (10/100/1000 Mbit) * T.I. TSB43AB23 * Realtek ALC889A 8-channel audio codec Memoria * Dual channel memory architecture * 4 x 1.8V DDR2 DIMM sockets supporting up to 8 GB of system memory * DDR2 1200/1066/800/667MHz, ECC, non ECC memory modules Connettori Interni I/O * 1 x 24-pin ATX power connector * 1 x 4-pin PCIe 12V power connector * 1 x 8-pin ATX 12V power connector * 1 x CD in * 1 x Chassis Intrusion connector * 1 x COM * 1 x CPU fan connector * 1 x FDD * 1 x front audio connector * 1 x front panel connector * 1 x IDE * 1 x IEEE 1394a * 1 x LPT connector * 1 x northbridge fan connector * 1 x power fan connector * 1 x power LED connector * 1 x SPDIF in * 1 x SPDIF out * 2 x system fan headers * 2 x USB 2.0/1.1 * 8 x SATA 3Gb/s Slot di Espansione * 2 x PCI * 2 x PCI Express 2.0 x16 slots (The PCIE_16_1 slot supports x16; the PCIE_16_2 supports x16.) * 3 x PCI Express x1 slots (share with the PCIE_16_2 slot) Pannello Posteriore I/O * 1 x SPDIF out (coaxial) * 1 x SPDIF out (optical) * 2 x IEEE 1394a * 2 x RJ45 LAN * 6 x audio ports (Line In / Line Out / MIC In / Surround Speaker Out(Rear Speaker Out) / Center/Subwoofer Speaker Out / Side Speaker Out) * 8 x USB 2.0/1.1 * PS/2 (Keyboard/Mouse) Fattore di Forma * ATX, 305mm x 244mm Monitoraggio H/W * CPU fan speed control * CPU overheating warning * CPU/System temperature detection * CPU/System/Power fan failure warning * CPU/System/Power fan speed detection * System voltage detection BIOS * 2 x 8 Mbit flash ROM * Award BIOS * PnP 1.0a, DMI 2.0, SM BIOS 2.3, ACPI 1.0b * Supports Quad BIOS Altre Caratteristiche * @BIOS™ * Download Center * Q-Flash™ * Support for Dynamic Energy Saver * Supports EasyTune * Xpress™ Install * Xpress™ Recovery 2 CLICCA QUI PER MAGGIORI INFO Come è questa mobo? Qualcuno l'ha provata? Quote Link to comment Share on other sites More sharing options...
megthebest Posted April 2, 2008 Share Posted April 2, 2008 io ho la giga x38-ds5 ... questa x48 dovrebbe migliorare il supporto all'fsb 1600 (che cmq per la cronaca la mia x38 supporta lla grande... anzi senza problemi la mia cpu arriva a 1800Mhz di fsb ). Inoltre ha il dispositivo energy saving che potrebbe avere una utilità se non si usasse questo tipo di schede madri in overclock spinto.. infatti credo che prendere una mobo da 220€ e tenere tutti i componenti installati @ default sia quasi un'eresia , visto che potrebbe farlo lo stesso una mobo da 120€... Occhio alle prime revisioni... gigabyte come asus nei primi modelli sul mercato commettono forse qualche "peccato veniale" non assicurandosi che siano esenti da problemini vari.. Attendiamo qualche possessore e la sua esperienza.. ciao p.s. attenzione nell'installare dissipatori ad alte prestazioni...: la mobo ha una black plate dissipante (crazy cool) che va rimossa per permettere di alloggiare la back plate del dissipatore,, questa operazione in caso di problemi e di non corretto reinserimento, può invalidare la garanzia Quote Link to comment Share on other sites More sharing options...
Tarantula Posted April 2, 2008 Author Share Posted April 2, 2008 Capito! Va bene, aspettiamo le prime esperienze Quote Link to comment Share on other sites More sharing options...
diablos Posted April 3, 2008 Share Posted April 3, 2008 mi piace possiedo una ds3p che da un bel po che mi sta facendo divertire Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.