Intel New Generation Performance-i7 2600K with BIOSTAR TP67XE (5.1GHz) Test

[windwithme]

Please refer to my BIOS setting:

Boot logo:

Main page:

Compliency is AMI UEFI X64 2.0

O.N.E page:

The default setting of Turbo Mode is 38, 37, 36, and 35, with better CPU speeding up mode in version 2.0.

As to DRAM frequency, 1066~2133 modes are supported, so users can enjoy better DDR3 performance.

CPU Base Clock shows 10000, which means current bus speed is 100.00MHz; if it shows 10560, which means 105.60MHz.

Therefore, the item may not show an integer, such as 133, 166, 200MHz.

The setting above is DDR3 arguments, providing users to choose faster arguments; of course, making the system steady is also important.

There are 4 modes for CPU VCore Mode: SPEC Volgate/Auto/Offset Mode/Fixed Mode

CPU VCore Offset +0.010~+0.520V

CPU VCore Fixed 1.000~1.790V

DRAM Voltage 1.300~2.200V

CPU Configuration:

Some functions about CPU, such as common HT technology; you also can choose how many cores you want to activate.

PC Health Status:

With built-in monitor chipset, you can know main voltage or temperature information.

As to overclocking, this time it is not necessary for LGA 1155 to adjust too many items.

So just focus on CPU voltage, clock multiplier; and DRAM clock, arguments, voltage.

Due to the limited scope of bus speed (about 5~7%), using K series CPU would be a better choice to overclock substantially.

As to DDR3, I use US brand CORSAIR high-level DOMINATOR-GT series—the latest CMT4GX3M2B2133C9.

GT series use red and black as colour matching; in recent year, more and more motherboard and DRAM also use the two colours.

The argument specification is CL9 10-9-27 1.50V.

Compared with DDR3 voltage specification (1.650V) recommended by Intel, 1.50V only of GT 2133 can make the system steady.

AIRFLOW of Red-black version with DOMINATOR-GT makes the appearance quality nicer.

CPU 3502.8MHz DDR3 2135.2 CL7 10-7-27 1T 1.650V

ADIA64 Memory Read: 22132 MB/s

Sandra Memory Bandwidth: 28132 MB/s

MaXXMEM Memory-Copy: 21755 MB/s

[windwithme]

CPU 5020.4MHz DDR3 2142 CL7 10-7-27 1T 1.650V

ADIA64 Memory Read: 25582 MB/s

Sandra Memory Bandwidth: 28475 MB/s

MaXXMEM Memory-Copy: 28139 MB/s

After CPU clock rises, the test figures of memory bandwidth in ADIA64 and MaXXMEM also rise obviously,

but not in Sandra Memory Bandwidth; this is the main difference amongst the three software.

And about the test figure of bandwidth, even if LGA 1155 and LGA 1156 are both dual-channel design,

the former shows about 20% greater performance than the latter does.

Although Sandy Bridge CPU only uses dual-channel design, its memory bandwidth can compete with that of LGA 1366.

ADIA64 Memory Read: 26605 MB/s

Sandra Memory Bandwidth: 29903 MB/s

MaXXMEM Memory-Copy: 29007 MB/s

Due to the limited scope of bus speed of Sandy Bridge architecture, about only 104~108MHz can be adjusted (depending upon each CPU).

The default CPU bus speed can contribute to achieve DDR3 2133 clock rate, so overclocking would not be a big problem.

If DRAM quality is good enough, performance over DDR3 2200 is not a difficult challenge.

Overclocking performance:

CPU 100.4 X 50 => 5020.2MHz(Turbo Boost disabled; C1E disabled)

DDR3 2142 CL7 10-7-27 1T 1.650V

Hyper PI 32M X8=> 12m 06.384s

CPUMARK 99=> 774

Nuclearus Multi Core => 32585

Fritz Chess Benchmark => 39.29/18859

CrystalMark 2004R3 => 427585

CINEBENCH R11.5

CPU => 9.82 pts

CPU(Single Core) => 2.05 pts

PCMark Vantage => 25062

3DMark Vantage

CPU SCORE => 65044

After 2600K is overclocked from 3.5 GHz to 5GHz, performance increases 20~30% in most software mentioned above.

When CPU is in full usage, voltage only needs 1.392V; hence, 32nm manufacturing process makes overclocking ability much better.

According to the related information I acquired on the Internet, 2600K over 5GHz is not commonly seen;

generally, the scope 2600K D1 is about 4.7~4.9GHz under air-cooling system.

The performance of Sandy Bridge is still better than 45nm 4C8T CPU (overclocking scope is 4.1~4.3GHz).

Temperature:

System standby: 43?~46?

CPU in full usage: 74?~83?

Intel Burn Test v2.4?Stress Level Maximum

If you want to overclock over 5GHz, you have to increase voltage, and note that temperature also rises much.

If you prefer low voltage and temperature for long-time using, 4.5GHz can be steady under 1.272V only.

Users can set personal setting by their preference.

[windwithme]

Power consumption test:

System standby: 139W

CPU in full usage: 257W

Compared with power consumption of default clock rate:

Power consumption of system standby: 65% higher

Power consumption of CPU in full usage: 105% higher

It seems that the consumption increase so much, but as far as 5GHz high clock rate and high performance platform is concerned, 257W can be acceptable.

By the way, is 5GHz the maximum for 2600K under air-cooling? If fortunately, 5.1GHz can be achieved steadily.

CPU 100 X 51 => 5100.4MHz(Turbo Boost disabled; C1E disabled)

DDR3 2133.6 CL7 10-7-27 1T 1.650V

Hyper PI 32M X8=> 11m 48.382s

Fritz Chess Benchmark => 40.11/19251

As to the latest Sandy Bridge LGA 1155 CPU in 2011, 2300~2500K all use L3 Cache 6MB, and only 2600/2600K is equipped with 8MB.

K series are 2500K and 2600K, but other Sandy Bridge CPU, with limited scope of bus speed, may only have 5~8% overclocking scope.

Therefore, LGA 1155 is categorised definitely.

To the consumers who want to overclock, choosing K series is suggested, but with higher prices.

And most of the other Sandy Bridge CPUs may be suitable to the consumers who don’t overclock.

About the consideration above, I’m not sure that Intel is overconfident with Sandy Bridge performance, or that Intel wants to let LGA 1156 survive.

Originally, I thought that the reason why clock rate and power consumption of LGA 1155 platform made great progress was that 45nm manufacturing process became 32nm.

However, afterwards I find that all Sandy Bridge CPUs are built in GPU,

so it will be more convenient for users in future to use the chipset with display output function, such as H67.

Moreover, another advantage of this new platform is that it has higher performance of DDR3 and Turbo Boost 2.0 technology.

I use new generation P67 chipset in the test.

When manufacturers release P67 motherboards in the market, their prices, I estimate, will be a bit expensive than the prices of P55 motherboards.

BIOSTAR TP67XE is still featured parity, and the price is about US$160.

The motherboard supports the latest USB 3.0 and SATA3; unique BIO-Remote2 multimedia software; and THX TrueStudioPRO sound effects technology.

Furthermore, TP67XE also shows great performance of overclocking, so it can be a high C/P P67 product.

BIOSTAR now also aims for supporting multimedia software and hardware technology, making its products more competitive in the market.

I shared much overclocking experience about X58 and P55 before,

and I shall continue overclocking and analysing P67 motherboards from various brands in future.

If there is something this article doesn’t mention, I shall renew related information in the future reports.

Finally, I hope with the release of new generation products, the prices of previous generation platforms can be lowered faster.

So, consumers can choose more platforms with good quality at bargain prices.

This article is also in my blog WIND 3C. Any comments are always welcome

[tom1]

Amazinggg

[swattolo]

This cpu, 2600k, is fantastic !!!

What do you think about Gigabyte UD3, UD5 for this cpu ?

[keroro.90]

2600k.....good work..

[KURTZ]

nice stuff dude

[Devil_Mcry]

windwithme good job

little question for u, do u see the official datasheet of SB 1155?

I saw that the new max VDimm specification of SB 1155 is 1.575v ! now do u know if old kits 1.65 are compatible at 100% ?

t.y.

[windwithme]

Update

BIOSTAR TP67XE 1/3 BIOS - Internal PLL Voltage Override

2500K D2 OC 5404MHz

Thanks

[One1ros]

5404 MHz?!?! That's insane!!!

[lorenzoneri]

sono curioso di sapere quanti GFlops fa a 5,4GHz,

puoi fare un run di linX e postarlo?

Grazie,

Lorenzo

[swattolo]

5.4Ghz run the Superpi !!!