Mod’n Roll 2012: The Theory of Everything.

[tom1]

well , waiting for next pics

[Angel OD]

tom1 ha scritto:

well , waiting for next pics

Here you go!

I designed the plate for the In / out connections. It's gonna look something like this:

Then on to cutting and soldering the led's, and then mount them:

And it works:

Ran to the bathroom as that's the only place I have that's dark during the day! :lol:

This is on a drained 9v battery, so I think with 12v it's going to light up the entire country of Denmark!

And in daylight:

There we go. I might go to the workshop tomorrow again, but not sure.

C ya soon anyways!

[One1ros]

Very good work, man!

[tom1]

Quote

[Angel OD]

One1ros ha scritto:

Very good work, man!

tom1 ha scritto:

Quote

Thanks a lot guys!

I was going to do a piece today, but unfortunately I got called up to do a co-worker a favor so I didn't have time to finish it. Just pulled if from the cnc, so it still needs some filing and some holes. I'll get it done friday!

But I decided to put it in here, just as a kind of a teaser:

C ya friday with yet an update!

[tom1]

[Angel OD]

tom1 ha scritto:

Ty!

I had to cut it short today. But I have the next 10 days off, so some progress is to be expected!

But it is indeed a GFX backplate:

I don't know exactly what went wrong in measuring, but I had to take a bit off of the corner of the GFX pcb. No problems though, it's just PCB!

Sorry for the short update, I'll be back during the weekend with more!

I also bought some fittings. I was supposed to redo some myself, but they were on sale and for less than $1 a piece for these - Looking that good, there was no way I neede to do that!

I should be going to the workshop tomorrow, so hopefully yet an update shall be here by then!

[tom1]

WOW fantastic integration

[Angel OD]

tom1 ha scritto:

WOW fantastic integration

Thank you very much! I do my best!

[Angel OD]

I'm back!

Went to the workshop to find out my access card does not work on holidays!

Luckily it's brand new as the old one broke, and I therefore had a guest pass that I have not yet returned.

First look of the controller for the dvd-drive:

Can't wait to see this in action with components on, and software written for it!

Finally I got the I/O plate done!

Usb/Gfx/Lan mounted - The holes for the audio were a bit too small so I'll get those done tomorrow or saturday:

Put in the case. This is just for testing, I'll set it with rivets when I know it's ready!

That's it for now. I hope to have more for you tomorrow!

[tom1]

Fantastic very nice work

[One1ros]

Angel OD ha scritto:

Can't wait to see this in action with components on, and software written for it!

Me too!

This mod is becoming more and more interesting! Keep modding hard!

[Angel OD]

tom1 ha scritto:

Fantastic very nice work

Thank you very much!

One1ros ha scritto:

Me too!

This mod is becoming more and more interesting! Keep modding hard!

Thanks! Don't worry, I'm addicted to modding so I'll never stop!

[Angel OD]

What to do on friday morning of easter vacation?

I was planning to go to the workshop, but decided to stay home and get started on sleeving the PSU!

Going with white, blue and red.

I used my trusted homemade tool for this. Two little pieces of metal cut to size.

Halfway done with atx cable, the PCI-e is quite anoying since it's a 2x6 pin splitter, so I'm not done with that!

5 wires later I snapped both the small bits off of the tools

But that wasn't gonna stop me so I got it done. This included a 5 minute search on the floor for one of the little tool-bits... 0,3mmx0,8mmx5mm in length is not easy to spot even though I vacuumed the floor the day before yesterday!

I might get the cable done today! If not, I'll hope to get it done tomorrow after some hours at the workshop.

[tom1]

well

[Angel OD]

tom1 ha scritto:

well

Thank yoU!

A small update for you guys. I did a quick mockup with the donor gfx card, just to let you see how it's going to pan out.

I need to cut some different size spacers for the PSU cover to get it in line. Unfortunately it's not an exact science to get that damn thing sitting perfect!

Also I need a hole for the 8pin mobo cable, and something to hide the PCI-e riser cable somehow.

[tom1]

[One1ros]

Very nice sleeving!

And good work with the VGA waterblock.

[tom1]

news

[Angel OD]

tom1 ha scritto:

Thank you very much!

One1ros ha scritto:

Very nice sleeving!

And good work with the VGA waterblock.

Thanks man!

Unfortunately the waterblock is not going to be used on this build, it's just an old 8800 gts card..

tom1 ha scritto:

news

Not sure I understand what you mean... Unless you want an update?