Touchpad non funzionante
-
Ho verificato le connessioni del flat del touchpad e fingerprint, ma sono collegati correttamente. Il tastino della disattivazione/attivazione touchpad, non funziona. Questo mi fa pensare che non è alimentato proprio oppure il circuitino non funziona.
Da Gestione periferiche non mi vengono visti quindi non c'è problema software...
Come posso avere la certezza che il problema è del circuitino e non della connessione elettrica? E' molto strano che sia il touchpad ad avere problemi. Presumo esista un metodo per la verifica elettrica del circuitino.
Prima del disassemblaggio ogni tanto non funzionava, ma il tastino s'illuminava. Attendo maggiori info.
Ho trovato la procedura di diagnostica Acer in lingua inglese:
"Touchpad Check
If the touchpad doesn’t work, do the following procedures in sequence to
correct the problem. Do not replace a non-defective FRU:
1. After rebooting, run the Tracking Pad PS2 Mode Driver. For example Syn touch driver.
2. Run the utility with the PS/2 mouse functi on and check if the mouse is working.
3. If the PS/2 mouse does not work, then click if the main board to switch board FPC is connected properly.
4.If the mainboard to switch board FPC is connected correctly, then check if the FFC on the touchpad board
is connected properly.
5.If the FFC on the touchpad board is connected correctly, check if LS851 JP1 Pin6 = 5V are pules. If yes,
then replace switch board. If not, then go to the next step.
6. Replace the touchpad board.
7. If the touchpad still does not work, then replace the FPC on touchpad board.
After you use the touchpad, the pointer drifts on the screen for a short time. This self-acting pointer movement
will occur when a slight, steady pressure is applied to the touchpad pointer. This symptom is not a hardware
problem. No actions are necessary to be taken if the pointer movement stops in a short period of time."
Tom1 o Meg, potete supervisionare alla procedura di diagnostica?
-
Ho verificato le connessioni del flat del touchpad e fingerprint, ma sono collegati correttamente. Il tastino della disattivazione/attivazione touchpad, non funziona. Questo mi fa pensare che non è alimentato proprio oppure il circuitino non funziona.
Da Gestione periferiche non mi vengono visti quindi non c'è problema software...
Come posso avere la certezza che il problema è del circuitino e non della connessione elettrica? E' molto strano che sia il touchpad ad avere problemi. Presumo esista un metodo per la verifica elettrica del circuitino.
Prima del disassemblaggio ogni tanto non funzionava, ma il tastino s'illuminava. Attendo maggiori info.
Ho trovato la procedura di diagnostica Acer in lingua inglese:
"Touchpad Check
If the touchpad doesn’t work, do the following procedures in sequence to
correct the problem. Do not replace a non-defective FRU:
1. After rebooting, run the Tracking Pad PS2 Mode Driver. For example Syn touch driver.
2. Run the utility with the PS/2 mouse functi on and check if the mouse is working.
3. If the PS/2 mouse does not work, then click if the main board to switch board FPC is connected properly.
4.If the mainboard to switch board FPC is connected correctly, then check if the FFC on the touchpad board
is connected properly.
5.If the FFC on the touchpad board is connected correctly, check if LS851 JP1 Pin6 = 5V are pules. If yes,
then replace switch board. If not, then go to the next step.
6. Replace the touchpad board.
7. If the touchpad still does not work, then replace the FPC on touchpad board.
After you use the touchpad, the pointer drifts on the screen for a short time. This self-acting pointer movement
will occur when a slight, steady pressure is applied to the touchpad pointer. This symptom is not a hardware
problem. No actions are necessary to be taken if the pointer movement stops in a short period of time."
Tom1 o Meg, potete supervisionare alla procedura di diagnostica?
-
accendendo la scheda con la flat e togliendo la tastiera, potrei verificare con il tester se al pin5 arrivano i 5 volt come dice?
Ciao! Sembra che tu sia interessato a questa conversazione, ma non hai ancora un account.
Stanco di dover scorrere gli stessi post a ogni visita? Quando registri un account, tornerai sempre esattamente dove eri rimasto e potrai scegliere di essere avvisato delle nuove risposte (tramite email o notifica push). Potrai anche salvare segnalibri e votare i post per mostrare il tuo apprezzamento agli altri membri della comunità.
Con il tuo contributo, questo post potrebbe essere ancora migliore 💗
Registrati Accedi