Monster QX6850 on vapoLS
-
non è proprio una news recente ma cmq impressionante il qx di fugger...
Specs:
Intel QX6850 ES
Abit IP35 Pro B04 bios
Corsair PC2-10000 Domaintor
Enermax Galaxay 1000
Nvidia 8800 Ultra
Vapochill LS R507 Chilly1 modded
4x Raptor 150's RAID 0
2x Gigabyte I-Ram Raid 0
Sub cooling:
8K BTU portable ac unit blasting side of case and front of Vapo.
Notes:
All benches the memory was running 1:1 3-4-3-9-1T @ 2.4v
CPU voltage
1.575v reaches 4.5Ghz
1.65v reaches 4.6Ghz
1.7v reaches 4.7Ghz
1.8v + didnt help with the exception of the top speed screen shot.
Benching with more than 1.7v on the vapo brings it down, even with the extra sub cooling, short runs like pi, 2k1, and AM3 were possible at 4.7Ghz
Pretty much everything else is 4.6Ghz
I did have a blow out of the raid drives where I lost a few good 3D scores but some I did upload and landed #3 in hall of fame and I used a backup drive for 2K1 and AM3.
The maximum I have taken a screen shot is 10x495FSB but I cannot upload that score. Here is the next best at 10x485FSB screen shot stable.
First up, Aquamark 3 at 4.75Ghz, 700/1180
This took a while to get done and took 1.78v at this speed. At this speed only single threaded applications bound to the first core are stable.
Futuremark - ORB - Project Comparison
Backing off to 4.6Ghz I am able to get off quad core benches like Cinebench.
Not sure how I did not get a super pi screen cap above 4.7Ghz but here is one at 4.65Ghz, I was climbing up and got distracted with 2K1.
One of the last things I was working on before the raid bit it was PCMark on the I-Rams in RAID 0. I uploaded an image that was fairly impressive at 485FSB...
One of the small problems was getting the single drive to boot with raid enabled in bios. I will replicate the benches lost and kick a little more ass in the process. I lost a few 3D runs with single card.
Right now I plan to rerun 3D with SLI on the 680i and currerntly reloaded on Vista again to play World in Conflict and finish DX 10 stuff now that I have more horsepower.
I was able to boot to 4.75Ghz and I did get into windows at 4.8Ghz a few times. Here is a screen shot of the general tag in control panels.
-----------------------------------------------------------------
680i and SLI results
Current #1 on the ORB "Vista"
Futuremark - ORB - Project Comparison
Futuremark - ORB - Project Comparison
Futuremark - ORB - Project Comparison
-----------------------------------------------------------------------
P5K3-D results
4.7Ghz 760/1250
-
non è proprio una news recente ma cmq impressionante il qx di fugger...
Specs:
Intel QX6850 ES
Abit IP35 Pro B04 bios
Corsair PC2-10000 Domaintor
Enermax Galaxay 1000
Nvidia 8800 Ultra
Vapochill LS R507 Chilly1 modded
4x Raptor 150's RAID 0
2x Gigabyte I-Ram Raid 0
Sub cooling:
8K BTU portable ac unit blasting side of case and front of Vapo.
Notes:
All benches the memory was running 1:1 3-4-3-9-1T @ 2.4v
CPU voltage
1.575v reaches 4.5Ghz
1.65v reaches 4.6Ghz
1.7v reaches 4.7Ghz
1.8v + didnt help with the exception of the top speed screen shot.
Benching with more than 1.7v on the vapo brings it down, even with the extra sub cooling, short runs like pi, 2k1, and AM3 were possible at 4.7Ghz
Pretty much everything else is 4.6Ghz
I did have a blow out of the raid drives where I lost a few good 3D scores but some I did upload and landed #3 in hall of fame and I used a backup drive for 2K1 and AM3.
The maximum I have taken a screen shot is 10x495FSB but I cannot upload that score. Here is the next best at 10x485FSB screen shot stable.
First up, Aquamark 3 at 4.75Ghz, 700/1180
This took a while to get done and took 1.78v at this speed. At this speed only single threaded applications bound to the first core are stable.
Futuremark - ORB - Project Comparison
Backing off to 4.6Ghz I am able to get off quad core benches like Cinebench.
Not sure how I did not get a super pi screen cap above 4.7Ghz but here is one at 4.65Ghz, I was climbing up and got distracted with 2K1.
One of the last things I was working on before the raid bit it was PCMark on the I-Rams in RAID 0. I uploaded an image that was fairly impressive at 485FSB...
One of the small problems was getting the single drive to boot with raid enabled in bios. I will replicate the benches lost and kick a little more ass in the process. I lost a few 3D runs with single card.
Right now I plan to rerun 3D with SLI on the 680i and currerntly reloaded on Vista again to play World in Conflict and finish DX 10 stuff now that I have more horsepower.
I was able to boot to 4.75Ghz and I did get into windows at 4.8Ghz a few times. Here is a screen shot of the general tag in control panels.
-----------------------------------------------------------------
680i and SLI results
Current #1 on the ORB "Vista"
Futuremark - ORB - Project Comparison
Futuremark - ORB - Project Comparison
Futuremark - ORB - Project Comparison
-----------------------------------------------------------------------
P5K3-D results
4.7Ghz 760/1250
-
Si, sotto vapo è impressionante, contate che ha un motore da 1/4 hp con un evaporatore che fà morir dal ridere, in full quel qx sarà stato a -20C°, dire tanto:clapclap:........ops non avevo letto fosse moddato, ma se non erro è stato sostituito solo il gas, impressionante quel QX6850
-
Gran bel processore!
Veramente notevole!:clapclap:
Ciao;)
-
Azz che processore
-
si ottimo processore veramente sculato il caro Fugger.
-
MARCO74 ha scritto:
si ottimo processore veramente sculato il caro Fugger.
:hysterical:Ciao;)
Ciao! Sembra che tu sia interessato a questa conversazione, ma non hai ancora un account.
Stanco di dover scorrere gli stessi post a ogni visita? Quando registri un account, tornerai sempre esattamente dove eri rimasto e potrai scegliere di essere avvisato delle nuove risposte (tramite email o notifica push). Potrai anche salvare segnalibri e votare i post per mostrare il tuo apprezzamento agli altri membri della comunità.
Con il tuo contributo, questo post potrebbe essere ancora migliore 💗
Registrati Accedi