Mod'n Roll 2012 - Project V8 by DjinnVale
-
Well at first with a tone probe that may be black but I was like nothing, I finally decided by a gray color, and that I really liked.
And also bought a front Aerocool, the Touch Screen Fan Controller Aerocool V12XT, which was not easy to find.
-
I mounted my computer to start doing some test temperatures, and has left me open-mouthed before NOX COLBAY had a DEVIL, well ventilated, and e managed to lower the temperature 8 degrees to full, and plain out of 4 games .
As you will see and made ??a small driver air or wind tunnel for hard drives, with two 12cm fans that carry air directly to the graphics card.
In another photo you can see 3 relays and used that to make the board boot with the key, all three relays make the ignition and start function 3 position who has the key, the first red LED lights for 2, the second 3 LEDs green and the third contact booted the motherboard.
Well the team and is mounted:
ASUS P5E3 motherboard-PRO
Processor-Intel Q8300 Core 2quad
Ram DDR3 1600MHz Kingston Hyper-X 2 +2 GB
Video-2 Asus EAH 4870 1GB GDDR5
Source-Nox 780W Sonar
Seagate 500gb hard drive-
Same time I'm waiting for another team comes back it will consist of the following parts:
Motherboard-Asus Sabertooth P67 B3
Processor Intel Core i7-2600K
1600MHz DDR3 Ram kingston hyper-X 4 +4 GB
XFX RADEON HD6950 Video-830M 2GB GDDR5
WD Caviar Green 2TB Hard Drive 64MB SATA3
Crucial M4 HDD 128GB SSD SSD SATA3
Adapter Bracket OCZ SSD 2.5 "to 3.5" SSD HDD
-
leave the pictures with my old computer as soon as I get all the new equipment makes it Montare and more pictures.
-
Last week I take my keyboard and let him play with my tower.
-
it's fantastic
-
Nice work ,man!
-
Good job
-
Thanks guys, really like you to more people, is fantastic.
-
tuned!
-
Total tuned!
-
next mod which ?
-
Hold on this is not yet finished. I am expecting a chrome air filter. Besides that I will adapt it a collector, for admission, I'm going to make foam and caulk. And for themselves to adapt the filter to the manifold and mounted on the mod.
Well, the truth is, that I have an idea for another mod. But I can not even begin to do so. I have very little time due to my work. And the mod I have in mind can take me over 6 months.
-
nicei waiting the air filter e next step
-
Hello, I just pick up 2 filters in the store, they have already arrived.
I upload the photos of the filters and also of the manifold I'm doing, now I have to adapt the filter and collector.
-
Very cool open air filter
-
Ooo if too cool, I hope I look good finish.
-
-
Well with the following and give to finish my project.
In the end I decided to mount the filters but do their function is to filter, because although not leaked much rather clean air passes through them, that I shall see over time if they get dirty.
-
As you can see and open a hole in the top of the tower to allow airflow to the processor heatsink.
-
Once one is finished mount and take it home.
Ciao! Sembra che tu sia interessato a questa conversazione, ma non hai ancora un account.
Stanco di dover scorrere gli stessi post a ogni visita? Quando registri un account, tornerai sempre esattamente dove eri rimasto e potrai scegliere di essere avvisato delle nuove risposte (tramite email o notifica push). Potrai anche salvare segnalibri e votare i post per mostrare il tuo apprezzamento agli altri membri della comunità.
Con il tuo contributo, questo post potrebbe essere ancora migliore 💗
Registrati Accedi