Mod & Roll 2012 - KOMPRESSOR MOD by Chentinox

[chentinox]

Mod & Roll 2012 - KOMPRESSOR MOD by Chentinox

Hello, friends Xtremehardware, I see many people known and very good in the world of modding as Masbuscadomodding, Diegojavbu and Tortured Soul, greetings to them and those who do not know well.

Here I leave my thread to post photos of my current job modding called KOMPRESSOR where I mix my two best hobbies, modding and overclocking.

I will try to make a table-like mod bencheo.

My work of the compressor of a refrigerator in which I will use to cool the water to cool the liquid rerigeracion CPU.Las first tests were a success, leaving the CPU temperature to -4 ° with car coolant mixed with water .

I'll start with a strong foundation for the entire weight of the mod, a wooden tray DM.

Then I will lay out the space available for the mod occupies the minimum space possible.

To make this mod will use chassis metraquilato strips, cutting as an enclosure to make tough recubrire of green metraquilato then too.

The union between pieces use proper screws M-5 because I do not trust much to glue the parts due to their weight, in addition to screw you always have the option to remove it if necessary.

Once the envelope and check exterior mod pieces begin to assemble all staying with this.

Now it is preparing the lighting, for which we will use a blue LED strips around the perimeter of the tray, then paint all the black tray to be giving a consistent appearance.

Another very important part of a mod is pinura touches now time to prepare the pieces to paint, in this case, water pump, the compressor and the current transformer.

Very important to give a coat of primer before putting paint color, we will improve the adhesion of the paint chipping and future.

After preparing all the components of the mod, it will mount everything in place giving way to go.

Tap the time to prepare all the electronics, the push button on and off lights, plate and compressor.

Work although quite simple, a bit boring and welding wires ordination of them.

Then post the neon red on the bottom and violet at the inner corners of the mod.

With all this, my mod KOMPRESSOR will have this appearance.

Now I will work on the top cover.

I'll add some vents in the form of cylindrical nozzles.

Tap the time of the mod's name engraved on the metraquilato KOMPRESSOR.

In passing the name of the sponsors.

Here are some pictures with the front cover removed.

This is the time to test the mod KOMPRESSOR.

I will use the graphics cards with both air and liquid nitrogen.

[chentinox]

Mod & Roll 2012 - KOMPRESSOR MOD by Chentinox

Hello, friends Xtremehardware, I see many people known and very good in the world of modding as Masbuscadomodding, Diegojavbu and Tortured Soul, greetings to them and those who do not know well.

Here I leave my thread to post photos of my current job modding called KOMPRESSOR where I mix my two best hobbies, modding and overclocking.

I will try to make a table-like mod bencheo.

My work of the compressor of a refrigerator in which I will use to cool the water to cool the liquid rerigeracion CPU.Las first tests were a success, leaving the CPU temperature to -4 ° with car coolant mixed with water .

I'll start with a strong foundation for the entire weight of the mod, a wooden tray DM.

Then I will lay out the space available for the mod occupies the minimum space possible.

To make this mod will use chassis metraquilato strips, cutting as an enclosure to make tough recubrire of green metraquilato then too.

The union between pieces use proper screws M-5 because I do not trust much to glue the parts due to their weight, in addition to screw you always have the option to remove it if necessary.

Once the envelope and check exterior mod pieces begin to assemble all staying with this.

Now it is preparing the lighting, for which we will use a blue LED strips around the perimeter of the tray, then paint all the black tray to be giving a consistent appearance.

Another very important part of a mod is pinura touches now time to prepare the pieces to paint, in this case, water pump, the compressor and the current transformer.

Very important to give a coat of primer before putting paint color, we will improve the adhesion of the paint chipping and future.

After preparing all the components of the mod, it will mount everything in place giving way to go.

Tap the time to prepare all the electronics, the push button on and off lights, plate and compressor.

Work although quite simple, a bit boring and welding wires ordination of them.

Then post the neon red on the bottom and violet at the inner corners of the mod.

With all this, my mod KOMPRESSOR will have this appearance.

Now I will work on the top cover.

I'll add some vents in the form of cylindrical nozzles.

Tap the time of the mod's name engraved on the metraquilato KOMPRESSOR.

In passing the name of the sponsors.

Here are some pictures with the front cover removed.

This is the time to test the mod KOMPRESSOR.

I will use the graphics cards with both air and liquid nitrogen.

[Le085]

Welcome chentinox!

You can introduce yourself in this section: Presentazione nuovi utenti - Xtreme Hardware Forum

Your project seems interesting! Let's see what you will pull out of the box

[tom1]

Interested Project

[One1ros]

Very interesting, indeed.

[tom1]

news

[One1ros]

[FASE 2: Preparazione alla votazione] 15 Giugno - 22 Giugno

A fine concorso ogni utente avrà una settimana di tempo per presentare le foto o i video finali del proprio progetto per le votazioni, ogni utente potrà postare un massimo di 4 foto e 2 video per mod, tali foto rappresenteranno l'ultimo post del worklog e saranno quindi seguite dai ringraziamenti agli sponsor in caso di sponsorizzazione.

 

[Phase 2: Preparing to vote] June 15th to June 22nd

At the end of the contest each user will have a week to present the photos or videos of his final project to the vote, users can post up to 4 photos and 2 videos for each mod, these photos represent the last post of the worklog and then will be followed by thanks to the sponsors in the event of sponsorship.

[chentinox]

Hello again, friends Xtremehardware.it, here you have my final video for the contest.

The first is a slow version of the mod look.

The second video is a recording of a session of extreme overclocking with the Z68 mod KOMPRESSOR which sees the spectacle of this mod performing at 100%.

[chentinox]

Finally here I leave four pictures of the mod KOMPRESSOR.

To thank the sponsors of this contest as well to Xtremehardware.it by making and development.

It's been a pleasure to contribute my bit in this contest.

Greetings Vicente Centeno (ChentinoX).

[One1ros]

La fase di votazione è iniziata, questo è il thread ufficiale: http://www.xtremehardware.com/forum/f70/mod_n_roll_modding_contest_votazione_vote-33500/#post437588'>http://www.xtremehardware.com/forum/f70/mod_n_roll_modding_contest_votazione_vote-33500/#post437588

The voting phase has begun, this is the official thread: http://www.xtremehardware.com/forum/f70/mod_n_roll_modding_contest_votazione_vote-33500/#post437588

[One1ros]

Qui trovate la classifica finale! Here the final ranking!