Mod’n Roll 2012: The Theory of Everything.
-
i hope
-
One1ros ha scritto:
Are you going to make a plexiglass window with some cool design on it?Nope. I want the window to be clean so it doesn't take focus from the inside. Sorry!
tom1 ha scritto:
i hope
That goes for you too, sorry!
Dammit!
I guess things have been moving along without too many problems lately so something had to give...
I made the window for the side today, and that went easy peasy:
Filed to R3 in the corners:
And this is where s**t hit the fan. I wanted to remove all the left over glue on the inside from the soundproofing. A couple of drops of the stuff I used went around the corners, and attacked the paint on the front!
Don't think this will buff out, so I'll have to cover up the rad grill and shoot a layer of white tomorrow. Just what I didn't need since the whole thing must be done saturday...
Well, s**t happens! C ya soon!
-
Angel OD ha scritto:
Nope. I want the window to be clean so it doesn't take focus from the inside. Sorry!
Fair enough, this mod is also spectacular in the inside.
-
shame about the paint
-
nice finnish!
-
One1ros ha scritto:
Fair enough, this mod is also spectacular in the inside.
Thanks a lot!
tom1 ha scritto:
shame about the paintYeah... Kind of sucks! But I decided to try to save it, and I'm actually quite happy for the result. I have to be done saturday, so I don't have time to paint it.
ciberjack ha scritto:
nice finnish!
Thanks man!
Small update:
Used some 1200 grit wet sand paper to see if I could rescue the paint. Then some cutting compound.
I have to say that it's good enough. I'd love to go for great, but with the time left this is fine.:
Got the res mounted finally:
That's it for now. I'm hoping the tubing shows up friday as promised. If not I'll make do with what I got for now for the photoshoot.
C ya soon guys! :thumb:
-
come on , time is so end
-
Reality just bites!
I just came back from the workshop, it's now 9:30 pm. We spent the last 3 hours playing with the software for the drive mechanism, and everything works.
Except for the damn thing that the motor is just not powerfull enough. So I have realized that this idea is not going to work in this configuration.
This means that I will be done with the pc saturday, but not the drive mechanism.
We're going to go with a servo solution instead. That also eliminates the switches and give a cleaner look. it just sucks though...
But on the upside, I did some work on the case as well, and figured out how the tubing is going to be:
That's the story right now. I'll be back with some pictures of the build saturday. C ya guys then.
-
wow! it look's WOW..... no other word's
-
wowoowowowo nice very nice
-
is the evga word with back light or not?
-
ciberjack ha scritto:
wow! it look's WOW..... no other word'sI like wow!
Thanks man! tom1 ha scritto:
wowoowowowo nice very niceThanks a lot! I actually believe that I'll get it done for tomorrow!
ciberjack ha scritto:
is the evga word with back light or not?Nope, there is no backlight. It would be quite difficult since the water is running through the aluminum right under the letters.
Quick update. I'm completely beat from working too much, but in good spirit!
I think 3-4 hours of work tomorrow morning should do the trick!
Just a couple of pics for now!
Who was the bright mind that decided to mount the pumps right there? With no access to the fittings... sheesh! :lol:
Getting ready for the first liquid:
Running through the system:
Cpu block. Still not done bleeding the air:
Res:
That's it for now. I'll c you guys tomorrow with the finished pics!
-
amazing picture
-
Thanks a lot Tom1!
Well, it actually seems like I made it!
Got up early and went to the workshop at 8 this morning. 5 hours later I was done.
I'm sorry that I'm not better at taking pictures, and resizing them does not help.
Here goes, I hope you like the finished result!
-
[FASE 2: Preparazione alla votazione] 15 Giugno - 22 Giugno
A fine concorso ogni utente avrà una settimana di tempo per presentare le foto o i video finali del proprio progetto per le votazioni, ogni utente potrà postare un massimo di 4 foto e 2 video per mod, tali foto rappresenteranno l'ultimo post del worklog e saranno quindi seguite dai ringraziamenti agli sponsor in caso di sponsorizzazione.
[Phase 2: Preparing to vote] June 15th to June 22nd
At the end of the contest each user will have a week to present the photos or videos of his final project to the vote, users can post up to 4 photos and 2 videos for each mod, these photos represent the last post of the worklog and then will be followed by thanks to the sponsors in the event of sponsorship.
-
Only 4 photos... That's just plain evil! :cheazz:
Well, I'll post 4 and see how it goes.
-
well done!!
-
ciberjack ha scritto:
well done!!Thanks a lot man!
I'm really happy with how this case out in the end! Just hope my girlfriend likes it too!
-
Good luck to all the competitors!
-
La fase di votazione è iniziata, questo è il thread ufficiale: http://www.xtremehardware.com/forum/f70/mod_n_roll_modding_contest_votazione_vote-33500/#post437588'>http://www.xtremehardware.com/forum/f70/mod_n_roll_modding_contest_votazione_vote-33500/#post437588
The voting phase has begun, this is the official thread: http://www.xtremehardware.com/forum/f70/mod_n_roll_modding_contest_votazione_vote-33500/#post437588
Ciao! Sembra che tu sia interessato a questa conversazione, ma non hai ancora un account.
Stanco di dover scorrere gli stessi post a ogni visita? Quando registri un account, tornerai sempre esattamente dove eri rimasto e potrai scegliere di essere avvisato delle nuove risposte (tramite email o notifica push). Potrai anche salvare segnalibri e votare i post per mostrare il tuo apprezzamento agli altri membri della comunità.
Con il tuo contributo, questo post potrebbe essere ancora migliore 💗
Registrati Accedi