Salta al contenuto
  • Categorie
  • Recenti
  • Tag
  • Popolare
  • Utenti
  • Gruppi
Collassa
Logo del marchio
  1. Home
  2. Hardware
  3. CPU & Overclock
  4. [ENG] Intel Core i7-3960X with GIGABYTE G1.Assassin2 Enthusiast Platform Guide

[ENG] Intel Core i7-3960X with GIGABYTE G1.Assassin2 Enthusiast Platform Guide

Pianificato Fissato Bloccato Spostato CPU & Overclock
18 Post 0 Autori 3.2k Visualizzazioni
  • Da Vecchi a Nuovi
  • Da Nuovi a Vecchi
  • Più Voti
Rispondi
  • Risposta alla discussione
Effettua l'accesso per rispondere
Questa discussione è stata eliminata. Solo gli utenti con diritti di gestione possono vederla.
  • R Non in linea
    R Non in linea
    RIC3
    scritto su ultima modifica di
    #8

    nice work!

    1 Risposta Ultima Risposta
    0
    • W Non in linea
      W Non in linea
      windwithme
      scritto su ultima modifica di
      #9

      Full Speed is 1.440V

      I73960XOF72.png

      After burning test and measure the MOSFET highest temperature is 85 degree C.

      For next few X79 models review, I will also provide this temperature for reference.

      CPU voltage fluctuation is bigger than old BIOS.

      GIGABYTE G1.Assassin2

      Good

      1. G1-Killer series packing and components are better than own high end product.

      2. Spec-in UEFI BIOS and provide 2 BIOS interfaces

      3. Built-in Creative CA20K2 audio chip, Japanese high end audio caps and 128MB Memory cache.

      4. Killer E2100 Networking NPU with 1GB DDR2 cache for better networking traffic management.

      5. Unique BT4.0 and Wi-Fi PCI-e card. For mobility century, this is really useful features.

      6. Front panel has USB 3.0 and quick OC features. It also has audio headset amplifier.

      Weakness

      1. Chipset heatsink design is not good looking

      2. 8 DIMM DDR3 design will be better

      3. Before booting screen, if you click USB KB in advance, it may cause undetectable issue.

      4. CPU voltage fluctuation is bigger between standby and full speed.

      Performance ??????????

      Components ??????????

      Specification ??????????

      Appearance ??????????

      C/P Value ??????????

      I73960X22.jpg

      All MB makers launch X79 series to replace X58.

      The price is around 265~430 USD.

      For users don’t have high end audio or LAN card and you are considering to buy these two high end cards, G1 cost should be similar.

      LGA 2011 is Intel most high end product. The price is top of pyramid.

      You can pick up the platform by budget. Sandy Bridge structure has very wide.

      Lowest H61 can combine with Celeron G530. Entry OC has Z68 with i5-2500K.

      Mid-end OC has Z68 with i7-2600K/2700K and future you can have X79 plus i7-3820.

      If you need heavy multi-tasking and shorter working time, X79 with i7-3930K/3960X is the best performance combo.

      I73960X23.jpg

      The test result above shows Sandy Bridge-E structure is still the king of Desktop performance.

      There are i7-3930K and 3960X, 6C12T, CPU support multi-tasking performance.

      LGA 2011 CPU pricing structure is same as LGA 1366.

      Till 2012, i7-3820 4C8T launched, the enthusiasts will have one more choice.

      This year, there is only i7-2600K/2700K with Z68. Soon after, X79 with i7-3820 will become another option.

      Windwithme will keep sharing more brands X79 performance and OC guide.

      Wish all Happy New Year 2012 and you can find your best C/P PC combo in 2012.Thanks. :)

      This article is also post in my blog. WIND3C Any comments are all welcome.

      1 Risposta Ultima Risposta
      0
      • D Non in linea
        D Non in linea
        Devil_Mcry
        scritto su ultima modifica di
        #10

        very nice mainboard with good features like Creative & Killer e2100

        but there are troubles with these new gigabyte's mainboard on power mosfet, we must wait for the fixed reversion

        1 Risposta Ultima Risposta
        0
        • L Non in linea
          L Non in linea
          Le085
          scritto su ultima modifica di
          #11

          Thank you! Nice review!

          Devil I don't know if it is an extensive problem of all motherboards. We must say that the guy that did the video of the burning X79A-UD3 was using an Antec 920 at minimum speed with no airflows on power mosfets (and running linx)

          Yes, I agree that it should not fire like this but it seems not a problem of all motherboards and Gigabyte didn't make official statement on this. There are overclocking records with the UD3 under ln2, so this problem should not affect all motherboards. We must wait for more details about this problem.

          1 Risposta Ultima Risposta
          0
          • T Non in linea
            T Non in linea
            tom1
            scritto su ultima modifica di
            #12

            nice and exhaustive review

            1 Risposta Ultima Risposta
            0
            • D Non in linea
              D Non in linea
              Devil_Mcry
              scritto su ultima modifica di
              #13

              no, it's a common problem

              techpowerup.com/mobile/157543/Gigabyte-Recalling-X79-UD3-UD5-G1.Assassin-2-Motherboards.html

              now I'm not sure that it's realy a bios trouble like gigabyte wrote but it's a problema

              i checked online, with only 1.4v someone had report temp very high, like 80-90°

              1 Risposta Ultima Risposta
              0
              • L Non in linea
                L Non in linea
                Le085
                scritto su ultima modifica di
                #14

                uhm it seems very strange that Taiwan wants to make a recall but Germany not.

                I will ask Valter to make some test with the new BIOS.

                1 Risposta Ultima Risposta
                0
                • D Non in linea
                  D Non in linea
                  Devil_Mcry
                  scritto su ultima modifica di
                  #15

                  boh, anyway it sounds bad, like a strategy to cover the image of gigabyte

                  because, as DFI did in past, with BIOS patch gigabyte can limit the power of VRM, but in this way it puts a limit of the overclock

                  1 Risposta Ultima Risposta
                  0
                  • L Non in linea
                    L Non in linea
                    Le085
                    scritto su ultima modifica di
                    #16

                    This is why I would ask Valter to test the ud3 under phase change.

                    1 Risposta Ultima Risposta
                    0
                    • D Non in linea
                      D Non in linea
                      Delex
                      scritto su ultima modifica di
                      #17
                      O0
                      1 Risposta Ultima Risposta
                      0
                      • W Non in linea
                        W Non in linea
                        windwithme
                        scritto su ultima modifica di
                        #18

                        Devil_Mcry ha scritto:

                        very nice mainboard with good features like Creative & Killer e2100

                        but there are troubles with these new gigabyte's mainboard on power mosfet, we must wait for the fixed reversion

                        As GIGABYTE Taiwan press, they have released F7 BIOS to solve this issue and they won't make hardware change. Just for your reference.:)

                        1 Risposta Ultima Risposta
                        0
                        • T Non in linea
                          T Non in linea
                          tom1
                          scritto su ultima modifica di
                          #19

                          same bios for the actually record on ud3-ud5-ud7

                          1 Risposta Ultima Risposta
                          0

                          Ciao! Sembra che tu sia interessato a questa conversazione, ma non hai ancora un account.

                          Stanco di dover scorrere gli stessi post a ogni visita? Quando registri un account, tornerai sempre esattamente dove eri rimasto e potrai scegliere di essere avvisato delle nuove risposte (tramite email o notifica push). Potrai anche salvare segnalibri e votare i post per mostrare il tuo apprezzamento agli altri membri della comunità.

                          Con il tuo contributo, questo post potrebbe essere ancora migliore 💗

                          Registrati Accedi
                          Rispondi
                          • Risposta alla discussione
                          Effettua l'accesso per rispondere
                          • Da Vecchi a Nuovi
                          • Da Nuovi a Vecchi
                          • Più Voti


                          • Accedi

                          • Non hai un account? Registrati

                          • Accedi o registrati per effettuare la ricerca.
                          Powered by NodeBB Contributors
                          • Primo post
                            Ultimo post
                          0
                          • Categorie
                          • Recenti
                          • Tag
                          • Popolare
                          • Utenti
                          • Gruppi