[GUIDA] Supporto BIOS chip EEPROM

amirando

il verso di inserimento ok lo so non capisco dove inserirlo perchè il programmatore ha tre zoccoli a 8 pin .

il mio è questo:

come vedi ho tre zoccoli quale uso? poi ho cercato nei device ma il 25q32 non l'ho trovato cosa devo settare?

tom1

allora se il modello non lo porta purtroppo non puoi fare nulla , per l'inserimento va in quello verde alla base con il pallino come detto in su sulla sinistra.

ps.nel caso non riesci posso sempre programmartelo io

amirando

io ho controllato in prima pagina e c'è il 25Q32BV come supportato forse sarà un errore.

Se non riesco a riprogrammarlo ti faccio sapere in privato per spedirtelo.

Grazie

tom1

postami dove hai letto

amirando

http://www.xtremehardware.com/forum/f15/guida_supporto_bios_chip_eeprom-29014/#post350512

tom1

sicuramente quelli in grassetto che ha scritto il collega sono in fuori standard difatti se leggi sono ad 1.8 volt

tom1

difatti ti allego un immagine di come si opera

sono chip che hanno bisogno di particolari accorgimenti

Labview

Arrivo....

Per quel chip serve un programmatore con pcb 50B, il "TOMSAD Willem PRO 4 ISP" utilizza un pcb diverso e non supporta nativamente i chip "SPI Flash".

Prima di acquistare era meglio chiedere....

Comunque il programmatore migliore per i chip bios di ultima generazione è questo: SIVAVA Willem EPROM Programmer and Adapters Universal Programmer BIOS

[TABLE]

[TR]

[TD=class: normal, width: 100%, align: left]SIVAVA Willem EPROM Programmer PCB50B

(NEWEST!! IMPROVE for more supports 3V3-3V6 SPI Flash)

Introduction :

If you are looking for a genuine and quality Willem EPROM Programmer with stability between hardware and software, we are the right answer for you.

We are the manufacturer of electronic appliances and the distributor of real Willem EPROM Programmer online through the website since 2002 and is the most popular model among users.

We are the sole inventor (by Mr. Gitti Ieo) and developer team of real Willem EPROM Programmer of Hardwares Version: PCB50B, PCB50A, PCB4.5C, PCB4C, PCB3.5, PCB3b, SoftwareVersions:0.98D12C3, 0.98D12, 0.98D11, 0.98D10, 0.98D9, 0.98D5 , 0.98D2, 0.97ja, 0.97j, 0.97i+, 0.98i or (0.97i), 0.97h and 0.97g. and Adapters adapters to support of real Willem EPROM Programmer by Mr. Anoocha Carnaponpiputn from Thailand as the exclusive licensin

This is the genuine latest PCB50B model of Willem EPROM Programmer. This is to confirm that this is not an imitated Willem EPROM Programmer PCB5xx which is not produced in Thailand. Some models use the name ‘ True USB Willem Programmer ’ for the benefit of making them look like that they are in the same Willem EPROM Programmer family even though they are equipped with hardwares and software from other brands (GQxx) that never support same various chip number like our Willem EPROM Programmer.

You are purchasing directly from the real developer & manufacturer of real Willem universal programmer.[/TD]

[/TR]

[TR]

[TD=class: normal, bgcolor: #ADCDB1, align: left][/TD]

[/TR]

[TR]

[TD=class: normal, align: left] Applications:

Motherboard BIOS freshing & upgrading

Refreshing, Upgrading, Programming BIOS chips.

Copier, Fax machine, Printer main board maintaining or repairing.

Motor Vehicle memory device, MEMCAL or ECU code reading, writing.

VCD, DVD, Color TV maintaining or repairing.

Neon Light Controller code writing.

MCU development - programming for MCS-51 series, AVR series and PIC series MCU.

Repairing, reading, writing, programming PC motherboard BIOS Chips.

Upgrade the chip in your cars computer. Car / automotive ECU chip tuning, memory device code read / write / program.

Modify the chips in your Xbox or PlayStation Console.

Programming MicroChip PIC Micros.

Programming ATMEL AVR Micros.

Flash a 3V6 SPI device on your motherboard or HDD.[/TD]

[/TR]

[/TABLE]

Questo programmatore funziona benissimo con le SPI Flash in particolare con il W25Q64BVDAIG oppure W25Q32BVAIG, testati personalmente per le mie ASRorck.

amirando

hai ragione era meglio informarsi meglio...

se riesco a piazzare il mio a qualcuno lo ordinerò visto che mi servirebbe praticamente solo per bios di pc

Grazie a tutti per le info

tom1

cosa ti serve solo il per il bios

amirando

ogni tanto mi capita di dover riprogrammare bios di schede madri e vorrei farmelo in casa

tom1

ah capito

amirando

Labview ha scritto:

Arrivo....
Per quel chip serve un programmatore con pcb 50B, il "TOMSAD Willem PRO 4 ISP" utilizza un pcb diverso e non supporta nativamente i chip "SPI Flash".

Prima di acquistare era meglio chiedere....

Comunque il programmatore migliore per i chip bios di ultima generazione è questo: SIVAVA Willem EPROM Programmer and Adapters Universal Programmer BIOS

[TABLE]

[TR]

[TD=class: normal, align: left]SIVAVA Willem EPROM Programmer PCB50B

(NEWEST!! IMPROVE for more supports 3V3-3V6 SPI Flash)

Introduction :

If you are looking for a genuine and quality Willem EPROM Programmer with stability between hardware and software, we are the right answer for you.

We are the manufacturer of electronic appliances and the distributor of real Willem EPROM Programmer online through the website since 2002 and is the most popular model among users.

We are the sole inventor (by Mr. Gitti Ieo) and developer team of real Willem EPROM Programmer of Hardwares Version: PCB50B, PCB50A, PCB4.5C, PCB4C, PCB3.5, PCB3b, SoftwareVersions:0.98D12C3, 0.98D12, 0.98D11, 0.98D10, 0.98D9, 0.98D5 , 0.98D2, 0.97ja, 0.97j, 0.97i+, 0.98i or (0.97i), 0.97h and 0.97g. and Adapters adapters to support of real Willem EPROM Programmer by Mr. Anoocha Carnaponpiputn from Thailand as the exclusive licensin

This is the genuine latest PCB50B model of Willem EPROM Programmer. This is to confirm that this is not an imitated Willem EPROM Programmer PCB5xx which is not produced in Thailand. Some models use the name ‘ True USB Willem Programmer ’ for the benefit of making them look like that they are in the same Willem EPROM Programmer family even though they are equipped with hardwares and software from other brands (GQxx) that never support same various chip number like our Willem EPROM Programmer.

You are purchasing directly from the real developer & manufacturer of real Willem universal programmer.

[/TD]

[/TR]

[TR]

[TD=class: normal, bgcolor: #ADCDB1, align: left]

[/TD]

[/TR]

[TR]

[TD=class: normal, align: left] Applications:

Motherboard BIOS freshing & upgrading

Refreshing, Upgrading, Programming BIOS chips.

Copier, Fax machine, Printer main board maintaining or repairing.

Motor Vehicle memory device, MEMCAL or ECU code reading, writing.

VCD, DVD, Color TV maintaining or repairing.

Neon Light Controller code writing.

MCU development - programming for MCS-51 series, AVR series and PIC series MCU.

Repairing, reading, writing, programming PC motherboard BIOS Chips.

Upgrade the chip in your cars computer. Car / automotive ECU chip tuning, memory device code read / write / program.

Modify the chips in your Xbox or PlayStation Console.

Programming MicroChip PIC Micros.

Programming ATMEL AVR Micros.

Flash a 3V6 SPI device on your motherboard or HDD.

[/TD]

[/TR]

[/TABLE]

Questo programmatore funziona benissimo con le SPI Flash in particolare con il W25Q64BVDAIG oppure W25Q32BVAIG, testati personalmente per le mie ASRorck.

Ho visto sul sito indicato che hanno 6 diversi tipi di package quale mi consigliate considerato che mi servirà solo per riprogrammare bios di schede madri?

su quel sito posso acquistare tranquillo ?

tom1

il sito è affidabile, per il kit direi che puoi prendere il base

Labview

Ho aggiunto questo in prima pagina:

+---------------------------------------------------------------------------+
|                 AMI Firmware Update Utility  v3.02.00                     |
|      Copyright (C)2012 American Megatrends Inc. All Rights Reserved.      |
+---------------------------------------------------------------------------+
| Usage: AFUDOS.EXE  [Option 1] [Option 2]...                |
|           or                                                              |
|        AFUDOS.EXE                    |
|           or                                                              |
|        AFUDOS.EXE                                                |
| ------------------------------------------------------------------------- |
| Commands:                                                                 |
|         /O - Save current ROM image to file                               |
|         /U - Display ROM File's ROMID                                     |
|         /S - Refer to Options: /S                                         |
|         /D - Verification test of given ROM File without flashing BIOS.   |
|         /A - Refer to Options: /A                                         |
|       /OAD - Refer to Options: /OAD                                       |
| /CLNEVNLOG - Refer to Options: /CLNEVNLOG                                 |
| Options:                                                                  |
|         /Q - Silent execution                                             |
|         /X - Don't Check ROM ID                                           |
|       /CAF - Compare ROM file's data with Systems is different or         |
|              not, if not then cancel related update.                      |
|         /S - Display current system's ROMID                               |
|  /HOLEOUT: - Save specific ROM Hole according to RomHole GUID.            |
|              NewRomHole1.BIN /HOLEOUT:GUID                                |
|        /SP - Preserve Setup setting.                                      |
|         /R - Preserve ALL SMBIOS structure during programming             |
|        /Rn - Preserve SMBIOS type N during programming(n=0-255)           |
|         /B - Program Boot Block                                           |
|         /P - Program Main BIOS                                            |
|         /N - Program NVRAM                                                |
|         /K - Program all non-critical blocks.                             |
|        /Kn - Program n'th non-critical block(n=0-15).                     |
|     /HOLE: - Update specific ROM Hole according to RomHole GUID.          |
|              NewRomHole1.BIN /HOLE:GUID                                   |
|         /L - Program all ROM Holes.                                       |
|        /Ln - Program n'th ROM Hole only(n=0-15).                          |
|      /ECUF - Update EC BIOS when newer version is detected.               |
|         /E - Program Embedded Controller Block                            |
|        /ME - Program ME Entire Firmware Block.                            |
|      /MEUF - Program ME Ignition Firmware Block.                          |
|         /A - Oem Activation file                                          |
|       /OAD - Delete Oem Activation key                                    |
| /CLNEVNLOG - Clear Event Log.                                             |
|   /CAPSULE - Override Secure Flash policy to Capsule                      |
|  /RECOVERY - Override Secure Flash policy to Recovery                     |
|        /EC - Program Embedded Controller Block. (Flash Type)              |
|    /REBOOT - Reboot after programming.                                    |
|  /SHUTDOWN - Shutdown after programming.                                  |
+---------------------------------------------------------------------------+

http://www.ami.com/support/downloads/amiflash.zip

Altro non posso dare... :asd: