[Thread Ufficiale] ASRock Chipset INTEL Z68

[3DMark79]

Ah perfetto grazie Leo...ora sono piu' tranquillo!

[Labview]

Nuovo bios per la Fatal1ty Z68 Professional con OROM IRST 13.5.0.2164 Mod con trim attivo in raid

Ovviamente sul mio sito...

[3DMark79]

Labview ha scritto:

Nuovo bios per la Fatal1ty Z68 Professional con OROM IRST 13.5.0.2164 Mod con trim attivo in raid

Ovviamente sul mio sito...

Sempre grazie Labview per il contributo!

[Labview]

Grazie a voi per la collaborazione e la fiducia ad usare i miei bios.. :marameo:

[Labview]

Piccolo aggiornamento per la mitica Z68 Professional

http://www.mdclab.it/intel-socket-1155-fatal1ty-z68-professional-gen3.html

[tom1]

ottimo update

[Labview]

@jcorrea

which CPU and BIOS are you using?

[jcorrea]

Labview ha scritto:

@jcorrea

which CPU and BIOS are you using?

I'm using i7 3770K and bios 2.26A (MOD).

[Labview]

jcorrea ha scritto:

I'm using i7 3770K and bios 2.26A (MOD).

Ok, I updated the BIOS... http://www.mdclab.it/BIOS-T/jcorrea.zip

The "table map memory" is the last version of ASRock for intel 6 series chipset, I can not change the content.

I have update intel microcode to improve compatibility, good luck!

[jcorrea]

Thank you Labview.

I'll flash it right now.

Updated: It failed. Same issue. I'll change the memos, I'm thinking to get Corsair Vengeance Pro 2400mhz, I know those memories work on z68 Extreme Gen3 with XMP and dual channel, on related frequencies and timings.

(http://www.userbenchmark.com/UserRun/851634).

Perhaps, it will work on mine Fatal1ty z68 Professional Gen3.

[Labview]

jcorrea ha scritto:

Thank you Labview.

I'll flash it right now.

Updated: It failed. Same issue. I'll change the memos, I'm thinking to get Corsair Vengeance Pro 2400mhz, I know those memories work on z68 Extreme Gen3 with XMP and dual channel, on related frequencies and timings.

(http://www.userbenchmark.com/UserRun/851634).

Perhaps, it will work on mine Fatal1ty z68 Professional Gen3.

I have a Fatal1ty P67 Professional whit a kit memory "Corsair dominator GT 4x4 2133MHz" in XMP mode and I do not have problems. Link...

[jcorrea]

Labview ha scritto:

Ok, I updated the BIOS... http://www.mdclab.it/BIOS-T/jcorrea.zip

The "table map memory" is the last version of ASRock for intel 6 series chipset, I can not change the content.

I have update intel microcode to improve compatibility, good luck!

Ciao Labview, dove trovo la "table map memory" all'interno di UEFI? Proverò a scambiare per una delle altre carte.