Modificare BIOS AMI per poter scegliere una Frequenza RAM più bassa.. è possibile ??

Labview

Matthew8 ha scritto:

Buongiorno.
Avrei bisogno di un parere da parte di una persona che conosce bene i BIOS, come ad esempio labview

Ho un HTPC con Mainboard AOpen i45GMT MiniITX con supporto a CPU Intel Mobile Socket P.

L'ho modificata per renderla idonea all'Overclock e fare quindi tanti WR con tutte le Cpu del suddetto socket prendendo un bel pò di punti hwbot il ns. team.

Ho apportato le seguenti modifiche Hardware. (Vmods per: CPU VID, Chipset, DDR2) (PLL hardware FSB mod, per forzare l'FSB voluto, 166/200/266)

Oltre i 266 di FSB posso salire solo via software da Windows tramite software SetPLL e/o SetFSB ma a circa 315mhz di FSB vengo limitato dalle RAM che iniziano a trovarsi a frequenza TROPPO alta (circa 530MHz)

Purtroppo IL BIOS Della Mainboard non ha nessuna voce per impostare la frequenza delle RAM e si rifiuta di fare il boot se monto DDR2-266Mhz, vuole minimo le 333MHz, e il rapporto minimo fra FSB e RAM è 3:5. Ne consegue appunto che quando FSB è a 300MHz le RAM vanno già a 500MHz.

E' possibile fare una modifica al bios per poter abbassare la frequenza delle RAM ? e/o magari aggiungere qualche funzione utile alla causa (Overclock), tipo ad esempio la possibilità di selezionare timings ecc.. ??

il BIOS è AMIBIOS (686) tipologia ovviamente Legacy (Non UEFI)e dovrebbe avere il chip di tipo nuovo, quelli piccoli a 8 pin per intenderci.

Grazie. Mat_Agnesi

Mi serve il link per scaricare il bios, io trovo i45GMT HR o HD...

Se non ho un bios a disposizione non posso fare niente.

Matthew8

Ciao e grazie inanzitutto per l'interessamento.

ho controllato il modello esatto, è i45GMT-HR. Però purtroppo non sono riuscito a trovare il bios on-line, esiste qualche utility per salvarlo su file ? (AMI 686)

Matthew8

Ho provato salvarlo con AFUDOS v.1.19. ho usato il comando c:afudos /o(nomefile)

sembra che l'ha salvato correttamente, è un file da 1Mb come dimensione.

dal manuale della scheda madre dice che il bios è AMI PnP 16Mb SPI Flash ROM BIOS.

ho uppato il file che ho salvato a questo link. i45gmthr.rom

http://dropcanvas.com/#z3p98GM2SmtfUn

Labview

Il backup del bios è perfetto.

Il bios è proprio minimale senza nessun setting cpu e ram... pensavo di trovare qualche sezione disabilitata ma niente.

La gestione automatica delle ram è limitata a 3 livelli, 667-800-1067 MHz e non possono essere modificate altrimenti non parte più la mobo.

Mi dispiace ma con queste limitazioni non posso fare nulla.

Matthew8

Labview ha scritto:

Il backup del bios è perfetto.
Il bios è proprio minimale senza nessun setting cpu e ram... pensavo di trovare qualche sezione disabilitata ma niente.

La gestione automatica delle ram è limitata a 3 livelli, 667-800-1067 MHz e non possono essere modificate altrimenti non parte più la mobo.

Mi dispiace ma con queste limitazioni non posso fare nulla.

Peccato..

ecco spiegato come mai con le DDR2-533 il sistema non fà il boot. hanno messo il supporto per le DDR2-1067 SO-DIMM che nemmeno esistono.. non ha molto senso.

Proverò ad abbassarle a pc acceso agendo sul PLL, anche se non sono affatto sicuro che sia possibile.

Oppure prenderò delle RAM DDR2 capaci di reggere 600MHz, e c'è una persona che mi ha consigliato delle buone ram.

Terrò comunque il bios che ho scaricato come copia di riserva.

Grazie comunque !!

Matthew8

Labview ha scritto:

Il backup del bios è perfetto.
Il bios è proprio minimale senza nessun setting cpu e ram... pensavo di trovare qualche sezione disabilitata ma niente.

La gestione automatica delle ram è limitata a 3 livelli, 667-800-1067 MHz e non possono essere modificate altrimenti non parte più la mobo.

Mi dispiace ma con queste limitazioni non posso fare nulla.

scusami se rispolvero la discussione, ci sono state delle evoluzioni.

Sono riuscito ad abbassare la frequenza RAM via hardware mod, facendo la bsel mod alla cpu, ossia facendo credere al chipset che la CPU era con FSB1066 anzichè FSB800 come era in realtà. In questo modo mi ha abbassato lo Strap, e divisore frequenze FSB:RAM a 4:5.

Però, questa mod mi funziona solamente con i celeron core singolo(modello 900 o 925), con tutti gli altri processori Dual core la stessa mod non và, se la faccio il sistema non fà il Boot per niente !

inoltre...

la mainboard sembra che non ha la funzione Intel IDA (Intel dynamic acceleration - sarebbe quella che sui Core2 duo mobile ti fà aumentare il moltiplicatore cpu di un extra +1 oltre il valore standard, quando nella cpu lavora un solo core, salvo poi riabbassarlo al valore nominale quando invece lavorano entrambi i Core) Magari è disabilitato nel bios...

Riusciresti, quando ne hai tempo, di vedermi se si può fare qualcosa ?

grazie in anticipo

Labview

Il link per il download è off, ripristina perchè non ho più il file..

Matthew8

Labview ha scritto:

Il link per il download è off, ripristina perchè non ho più il file..

Eccolo:

http://dropcanvas.com/41ZgSN7D435y30

come detto sopra mi piacerebbe sapere se si può attivare la funzione IDA (Intel Dynamic Acceleration) supportata da tutte le CPU Core 2 DUO serie T7000, T8000, P8000 and T9000.

poi..

Ho scoperto che facendo modifica hardware al BSEL (Portando il pin cpu BSEL[1] a ZERO per far credere al chipset che la cpu abbia FSB 1066 invece di 800) Solo le CPU Mobile Celeron 900 e 925 funzionano bene e abbassano il ratio RAM/FSB a 4:5 o 2:3 proprio come volevo. Mentre tutte le altre CPU Dual Core non fanno nemmeno il boot con tale modifica. (provati T4500, T6600, T8100, T7700.. nessuno di questi fà il boot). i Dual Core mi lavorano solamente con divisori 1:2 e 3:5, mentre i Celeron possono lavorare con tutti i divisori 1:2, 3:5, 4:5, 2:3.

Questioni di microcodici CPU ?

Grazie di nuovo

Labview

Matthew8 ha scritto:

Eccolo:
http://dropcanvas.com/41ZgSN7D435y30

come detto sopra mi piacerebbe sapere se si può attivare la funzione IDA (Intel Dynamic Acceleration) supportata da tutte le CPU Core 2 DUO serie T7000, T8000, P8000 and T9000.

poi..

Ho scoperto che facendo modifica hardware al BSEL (Portando il pin cpu BSEL[1] a ZERO per far credere al chipset che la cpu abbia FSB 1066 invece di 800) Solo le CPU Mobile Celeron 900 e 925 funzionano bene e abbassano il ratio RAM/FSB a 4:5 o 2:3 proprio come volevo. Mentre tutte le altre CPU Dual Core non fanno nemmeno il boot con tale modifica. (provati T4500, T6600, T8100, T7700.. nessuno di questi fà il boot). i Dual Core mi lavorano solamente con divisori 1:2 e 3:5, mentre i Celeron possono lavorare con tutti i divisori 1:2, 3:5, 4:5, 2:3.

Questioni di microcodici CPU ?

Grazie di nuovo

Ti metto il report così puoi vedere tutto ciò che questo misero bios contiene nel menù, ovvero il minimo indispensabie

-------------------------------------------------------------------------------- AMIBIOS Information Report -------------------------------------------------------------------------------- BIOS Name: Cantiga ROM File: I45GMTHR.ROM Mon, Apr 18, 2016 18:02:48

BIOS MODULES

BIOS Version: 0800 BIOS Date: 12/21/09
BIOS Tag : CTGAO102 BIOS Size: 1024 KB

ModuleID/ModuleName RomLoc SourceSize SizeInROM %% RunLoc

11 P6 Micro Code 0009A214 1B008(110600) 1B008(110600) 00.00 Dynamic
08 Interface 000B5230 0820(02080) 0820(02080) 00.00 Dynamic
0C ROMID 000B5A64 0008(00008) 0008(00008) 00.00 Dynamic
1B Single Link Arch BIOS 00000010 6CDFD(445949) 327E0(206816) 53.62 Dynamic
20 PCI Option ROM 000B5A80 10C00(68608) A674(42612) 37.89 282A:8086
20 PCI Option ROM 000C0108 10000(65536) A0CC(41164) 37.19 2A42:8086
20 PCI Option ROM 00032804 E600(58880) 912C(37164) 36.88 10BF:8086
04 Setup Client 000CA1E8 8BE1(35809) 5668(22120) 38.23 Dynamic
2E User Defined 0003B944 7800(30720) 47B4(18356) 40.25 Dynamic
0E OEM Logo 0004010C 4B436(308278) 2F58(12120) 96.07 Dynamic
21 Multi Language 00043078 6379(25465) 2BD4(11220) 55.94 0004:5553
10 ACPI AML 00045C60 7237(29239) 2B64(11108) 62.01 Dynamic
18 Display Manager 000487D8 4245(16965) 1800(06144) 63.78 Dynamic
19 Font Module 000CF864 1304(04868) 059C(01436) 70.50 Dynamic
1A Small Logo(s) 00049FEC 26A2(09890) 0534(01332) 86.53 Dynamic
2B User Defined 0004A534 0550(01360) 0348(00840) 38.24 Dynamic
06 DMI 0004A890 0A00(02560) 033C(00828) 67.66 Dynamic
80 Image Information 000CFE14 0068(00104) 0068(00104) 00.00 Dynamic

BIOS MODULES IN THE NON-CRITICAL BLOCK

ModuleID/ModuleName RomLoc SourceSize SizeInROM %% RunLoc

55 User Defined 000E0020 7FC0(32704) 7FD4(32724) 00.00 Dynamic

BIOS PCI IRQ ROUTING TABLE

INT Pin A INT Pin B INT Pin C INT Pin D
Bus# Device# Reg# BitMap Reg# BitMap Reg# BitMap Reg# BitMap Slot

00h 08h 60h DCD8h 61h 0020h 62h DCD8h 63h DCD8h 00h
02h 00h 60h DCD8h 61h 0020h 62h DCD8h 63h DCD8h 10h
00h 10h 60h DCD8h 00h 0000h 00h 0000h 00h 0000h 00h
00h F8h 62h DCD8h 63h DCD8h 62h DCD8h 00h 0000h 00h
00h E8h 6Bh DCD8h 63h DCD8h 62h DCD8h 60h DCD8h 00h
00h D0h 60h DCD8h 69h DCD8h 62h DCD8h 63h DCD8h 00h
00h D8h 6Ah DCD8h 00h 0000h 00h 0000h 00h 0000h 00h
00h C8h 68h DCD8h 00h 0000h 00h 0000h 00h 0000h 00h
00h E0h 61h 0020h 60h DCD8h 62h DCD8h 63h DCD8h 00h
04h 00h 60h DCD8h 61h 0020h 62h DCD8h 63h DCD8h 20h
05h 00h 61h 0020h 62h DCD8h 63h DCD8h 60h DCD8h 21h
06h 00h 62h DCD8h 63h DCD8h 60h DCD8h 61h 0020h 22h
07h 00h 63h DCD8h 60h DCD8h 61h 0020h 62h DCD8h 23h
08h 00h 60h DCD8h 61h 0020h 62h DCD8h 63h DCD8h 24h
09h 00h 61h 0020h 62h DCD8h 63h DCD8h 60h DCD8h 25h
01h 00h 69h DCD8h 6Ah DCD8h 6Bh DCD8h 68h DCD8h 01h
01h 08h 6Ah DCD8h 69h DCD8h 68h DCD8h 6Bh DCD8h 02h
01h 10h 62h DCD8h 63h DCD8h 61h 0020h 60h DCD8h 03h
01h 18h 63h DCD8h 62h DCD8h 69h DCD8h 6Ah DCD8h 04h
00h 00h 00h 0000h 00h 0000h 00h 0000h 00h 0000h 00h

BIOS ROM DATA AREA

0000 : 41 4D 49 42 49 4F 53 20 - 30 38 30 30 31 35 00 00 AMIBIOS 080015..
0010 : 31 32 2F 32 31 2F 30 39 - 28 43 29 32 30 30 36 20 12/21/09(C)2006
0020 : 41 6D 65 72 69 63 61 6E - 20 4D 65 67 61 74 72 65 American Megatre
0030 : 6E 64 73 2C 20 49 6E 63 - 2E 20 41 6C 6C 20 52 69 nds, Inc. All Ri
0040 : 67 68 74 73 20 52 65 73 - 65 72 76 65 64 00 00 00 ghts Reserved...
0050 : 28 43 29 32 30 30 36 20 - 41 6D 65 72 69 63 61 6E (C)2006 American
0060 : 20 4D 65 67 61 74 72 65 - 6E 64 73 2C 20 49 6E 63 Megatrends, Inc
0070 : 2E 00 00 00 00 00 00 00 - 36 34 2D 30 31 30 30 2D ........64-0100-

0080 : 30 30 30 30 30 31 2D 30 - 30 31 30 31 31 31 31 2D 000001-00101111-
0090 : 31 32 32 31 30 39 2D 43 - 61 6E 74 69 67 61 00 00 122109-Cantiga..
00A0 : 30 30 30 2D 30 2D 30 30 - 30 30 2D 30 30 2D 30 30 000-0-0000-00-00
00B0 : 2D 30 30 30 30 2D 30 30 - 2D 30 30 2D 30 30 30 00 -0000-00-00-000.
00C0 : 00 00 00 00 00 00 00 00 - 30 30 30 2D 30 2D 30 30 ........000-0-00
00D0 : 30 30 2D 30 30 2D 30 30 - 2D 30 30 30 30 2D 30 30 00-00-00-0000-00
00E0 : 2D 30 30 2D 30 30 2D 30 - 00 00 00 00 5F 54 47 5F -00-00-0....TG
00F0 : 43 54 47 41 4F 31 30 32 - 00 00 00 00 00 00 00 00 CTGAO102........

0100 : 41 4D 49 42 49 4F 53 28 - 43 29 32 30 30 36 20 41 AMIBIOS(C)2006 A
0110 : 6D 65 72 69 63 61 6E 20 - 4D 65 67 61 74 72 65 6E merican Megatren
0120 : 64 73 2C 20 49 6E 63 2E - 20 20 20 20 20 20 20 20 ds, Inc.
0130 : 20 20 20 20 20 20 20 20 - 20 20 20 20 20 20 20 20
0140 : 20 20 20 20 20 20 20 20 - 20 20 20 20 20 20 0D 0A ..
0150 : 42 49 4F 53 20 44 61 74 - 65 3A 20 31 32 2F 32 31 BIOS Date: 12/21
0160 : 2F 30 39 20 32 33 3A 34 - 35 3A 33 31 20 56 65 72 /09 23:45:31 Ver
0170 : 3A 20 69 34 35 47 4D 74 - 2D 48 52 20 52 31 2E 30 : i45GMt-HR R1.0

0180 : 32 20 44 65 63 2E 32 31 - 2E 32 30 30 39 0D 0A 00 2 Dec.21.2009...
0190 : 00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
01A0 : 00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
01B0 : 00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
01C0 : 00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
01D0 : 00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
01E0 : 00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
01F0 : 00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................

0200 : 00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
0210 : 40 8B FF 40 3D 80 02 00 - 00 30 30 00 00 00 00 00 @..@=....00.....
0220 : 00 00 00 00 00 00 00 30 - 30 00 43 43 43 43 03 95 .......00.CCCC..
0230 : 00 00 20 00 00 00 00 00 - 00 00 00 00 00 00 00 00 .. .............
0240 : F8 03 F8 02 E8 03 E8 02 - BC 03 78 03 78 02 00 00 ..........x.x...
0250 : 00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 4E 00 ..............N.
0260 : 00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 4A 00 ..............J.
0270 : 59 00 00 1F 00 00 00 00 - F0 01 0E 70 01 0F 00 00 Y..........p....

0280 : 3F 80 00 1F 00 00 00 00 - 00 00 F9 64 F0 06 00 00 ?..........d....
0290 : 00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
02A0 : 00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
02B0 : 00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
02C0 : 00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
02D0 : 00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
02E0 : 00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
02F0 : 00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................

SETUP SCREENS

Main
Advanced
IDE Configuration
Primary IDE Master :
Primary IDE Slave :
Secondary IDE Master :
Secondary IDE Slave :
Third IDE Master :
Third IDE Slave :
Fourth IDE Master :
Fourth IDE Slave :
Fifth IDE Master :
Fifth IDE Slave :
Sixth IDE Master :
Sixth IDE Slave :
SuperIO Configuration
Hardware Health Configuration
APM Configuration
Boot
Boot Settings Configuration
Boot Device Priority
Hard Disk Drives
Removable Drives
CD/DVD Drives
USB Drives
Security
Clear User Password
Chipset
North Bridge Configuration
Video Function Configuration
South Bridge Configuration
Exit
Save Changes and Exit
Discard Changes and Exit
Discard Changes
Load Optimal Defaults

SETUP STRUCTURES

Main

Control Group Structure Show/ Access/ Failsafe value Optimal value
Name Hide Usage Sel Option Name Sel Option Name

BIOS SETUP UTILITY Show Title
System Overview Show Normal
Version : Show No Refresh
-------Separator------- Show Blank Line
Processor Show Normal
Show No Refresh
Speed : Show No Refresh
-------Separator------- Show Blank Line
System Memory Show Normal
Size : Show No Refresh
-------Separator------- Show Blank Line
System Time Show Extended User
System Date Show Extended User

Advanced

Control Group Structure Show/ Access/ Failsafe value Optimal value
Name Hide Usage Sel Option Name Sel Option Name

BIOS SETUP UTILITY Show Title
Advanced Settings Show Normal
-------Separator------- Show Single Line
WARNING: Setting wrong Show Normal
values in below sections
may cause system to Show Normal
malfunction.
-------Separator------- Show Blank Line
HDD LED Blinking support Show User 01 Enabled 01 Enabled

IDE Configuration

Control Group Structure Show/ Access/ Failsafe value Optimal value
Name Hide Usage Sel Option Name Sel Option Name

BIOS SETUP UTILITY Show Title
IDE Configuration Show Normal
-------Separator------- Show Single Line
SATA#1 Configuration HiddenUser 02 02
Configure SATA#1 as Show User 00 00
-------Separator------- Show Blank Line
-------Separator------- Show Blank Line
Hot Plug HiddenUser 00 00
-------Separator------- Show Blank Line
Hard Disk Write Protect HiddenUser 00 Disabled 00 Disabled
IDE Detect Time Out (Sec) HiddenUser 05 25 05 25
ATA(PI) 80Pin Cable HiddenUser 00 Host & Device 00 Host & Device
Detection

Primary IDE Master :

Control Group Structure Show/ Access/ Failsafe value Optimal value
Name Hide Usage Sel Option Name Sel Option Name

BIOS SETUP UTILITY Show Title
Primary IDE Master Show Normal
-------Separator------- Show Single Line
Device : Show No Refresh
Vendor : Show No Refresh
Size : Show No Refresh
LBA Mode : Show No Refresh
Block Mode: Show No Refresh
PIO Mode : Show No Refresh
Async DMA : Show No Refresh
Ultra DMA : Show No Refresh
S.M.A.R.T.: Show No Refresh
A new device has been Show No Refresh
detected. Please reboot.
-------Separator------- Show Single Line
Type Show User 30 30
Cylinder Show User
Head Show User
Sector Show User
Size Show No Refresh
LBA/Large Mode Show User 01 01
Block (Multi-Sector Show User 01 01
Transfer) Mode
PIO Mode Show User 00 00
DMA Mode Show User 00 00
S.M.A.R.T. Show User 00 00
32Bit Data Transfer Show User 00 01
ARMD Emulation Type Show User 00 00

Primary IDE Slave :

Control Group Structure Show/ Access/ Failsafe value Optimal value
Name Hide Usage Sel Option Name Sel Option Name

BIOS SETUP UTILITY Show Title
Primary IDE Slave Show Normal
-------Separator------- Show Single Line
Device : Show No Refresh
Vendor : Show No Refresh
Size : Show No Refresh
LBA Mode : Show No Refresh
Block Mode: Show No Refresh
PIO Mode : Show No Refresh
Async DMA : Show No Refresh
Ultra DMA : Show No Refresh
S.M.A.R.T.: Show No Refresh
A new device has been Show No Refresh
detected. Please reboot.
-------Separator------- Show Single Line
Type Show User 30 30
Cylinder Show User
Head Show User
Sector Show User
Size Show No Refresh
LBA/Large Mode Show User 01 01
Block (Multi-Sector Show User 01 01
Transfer) Mode
PIO Mode Show User 00 00
DMA Mode Show User 00 00
S.M.A.R.T. Show User 00 00
32Bit Data Transfer Show User 00 01
ARMD Emulation Type Show User 00 00

Secondary IDE Master :

Control Group Structure Show/ Access/ Failsafe value Optimal value
Name Hide Usage Sel Option Name Sel Option Name

BIOS SETUP UTILITY Show Title
Secondary IDE Master Show Normal
-------Separator------- Show Single Line
Device : Show No Refresh
Vendor : Show No Refresh
Size : Show No Refresh
LBA Mode : Show No Refresh
Block Mode: Show No Refresh
PIO Mode : Show No Refresh
Async DMA : Show No Refresh
Ultra DMA : Show No Refresh
S.M.A.R.T.: Show No Refresh
A new device has been Show No Refresh
detected. Please reboot.
-------Separator------- Show Single Line
Type Show User 30 30
Cylinder Show User
Head Show User
Sector Show User
Size Show No Refresh
LBA/Large Mode Show User 01 01
Block (Multi-Sector Show User 01 01
Transfer) Mode
PIO Mode Show User 00 00
DMA Mode Show User 00 00
S.M.A.R.T. Show User 00 00
32Bit Data Transfer Show User 00 01
ARMD Emulation Type Show User 00 00

Secondary IDE Slave :

Control Group Structure Show/ Access/ Failsafe value Optimal value
Name Hide Usage Sel Option Name Sel Option Name

BIOS SETUP UTILITY Show Title
Secondary IDE Slave Show Normal
-------Separator------- Show Single Line
Device : Show No Refresh
Vendor : Show No Refresh
Size : Show No Refresh
LBA Mode : Show No Refresh
Block Mode: Show No Refresh
PIO Mode : Show No Refresh
Async DMA : Show No Refresh
Ultra DMA : Show No Refresh
S.M.A.R.T.: Show No Refresh
A new device has been Show No Refresh
detected. Please reboot.
-------Separator------- Show Single Line
Type Show User 30 30
Cylinder Show User
Head Show User
Sector Show User
Size Show No Refresh
LBA/Large Mode Show User 01 01
Block (Multi-Sector Show User 01 01
Transfer) Mode
PIO Mode Show User 00 00
DMA Mode Show User 00 00
S.M.A.R.T. Show User 00 00
32Bit Data Transfer Show User 00 01
ARMD Emulation Type Show User 00 00

Third IDE Master :

Control Group Structure Show/ Access/ Failsafe value Optimal value
Name Hide Usage Sel Option Name Sel Option Name

BIOS SETUP UTILITY Show Title
Third IDE Master Show Normal
-------Separator------- Show Single Line
Device : Show No Refresh
Vendor : Show No Refresh
Size : Show No Refresh
LBA Mode : Show No Refresh
Block Mode: Show No Refresh
PIO Mode : Show No Refresh
Async DMA : Show No Refresh
Ultra DMA : Show No Refresh
S.M.A.R.T.: Show No Refresh
A new device has been Show No Refresh
detected. Please reboot.
-------Separator------- Show Single Line
LBA/Large Mode Show User 01 01
Block (Multi-Sector Show User 01 01
Transfer) Mode
PIO Mode Show User 00 00
DMA Mode Show User 00 00
S.M.A.R.T. Show User 00 00
32Bit Data Transfer Show User 00 01
ARMD Emulation Type Show User 00 00

Third IDE Slave :

Control Group Structure Show/ Access/ Failsafe value Optimal value
Name Hide Usage Sel Option Name Sel Option Name

BIOS SETUP UTILITY Show Title
Third IDE Slave Show Normal
-------Separator------- Show Single Line
Device : Show No Refresh
Vendor : Show No Refresh
Size : Show No Refresh
LBA Mode : Show No Refresh
Block Mode: Show No Refresh
PIO Mode : Show No Refresh
Async DMA : Show No Refresh
Ultra DMA : Show No Refresh
S.M.A.R.T.: Show No Refresh
A new device has been Show No Refresh
detected. Please reboot.
-------Separator------- Show Single Line
LBA/Large Mode Show User 01 01
Block (Multi-Sector Show User 01 01
Transfer) Mode
PIO Mode Show User 00 00
DMA Mode Show User 00 00
S.M.A.R.T. Show User 00 00
32Bit Data Transfer Show User 00 01
ARMD Emulation Type Show User 00 00

Fourth IDE Master :

Control Group Structure Show/ Access/ Failsafe value Optimal value
Name Hide Usage Sel Option Name Sel Option Name

BIOS SETUP UTILITY Show Title
Fourth IDE Master Show Normal
-------Separator------- Show Single Line
Device : Show No Refresh
Vendor : Show No Refresh
Size : Show No Refresh
LBA Mode : Show No Refresh
Block Mode: Show No Refresh
PIO Mode : Show No Refresh
Async DMA : Show No Refresh
Ultra DMA : Show No Refresh
S.M.A.R.T.: Show No Refresh
A new device has been Show No Refresh
detected. Please reboot.
-------Separator------- Show Single Line
LBA/Large Mode Show User 01 01
Block (Multi-Sector Show User 01 01
Transfer) Mode
PIO Mode Show User 00 00
DMA Mode Show User 00 00
S.M.A.R.T. Show User 00 00
32Bit Data Transfer Show User 00 01
ARMD Emulation Type Show User 00 00

Fourth IDE Slave :

Control Group Structure Show/ Access/ Failsafe value Optimal value
Name Hide Usage Sel Option Name Sel Option Name

BIOS SETUP UTILITY Show Title
Fourth IDE Slave Show Normal
-------Separator------- Show Single Line
Device : Show No Refresh
Vendor : Show No Refresh
Size : Show No Refresh
LBA Mode : Show No Refresh
Block Mode: Show No Refresh
PIO Mode : Show No Refresh
Async DMA : Show No Refresh
Ultra DMA : Show No Refresh
S.M.A.R.T.: Show No Refresh
A new device has been Show No Refresh
detected. Please reboot.
-------Separator------- Show Single Line
LBA/Large Mode Show User 01 01
Block (Multi-Sector Show User 01 01
Transfer) Mode
PIO Mode Show User 00 00
DMA Mode Show User 00 00
S.M.A.R.T. Show User 00 00
32Bit Data Transfer Show User 00 01
ARMD Emulation Type Show User 00 00

Fifth IDE Master :

Control Group Structure Show/ Access/ Failsafe value Optimal value
Name Hide Usage Sel Option Name Sel Option Name

BIOS SETUP UTILITY Show Title
5th IDE Master Show Normal
-------Separator------- Show Single Line
Device : Show No Refresh
Vendor : Show No Refresh
Size : Show No Refresh
LBA Mode : Show No Refresh
Block Mode: Show No Refresh
PIO Mode : Show No Refresh
Async DMA : Show No Refresh
Ultra DMA : Show No Refresh
S.M.A.R.T.: Show No Refresh
A new device has been Show No Refresh
detected. Please reboot.
-------Separator------- Show Single Line
LBA/Large Mode Show User 01 01
Block (Multi-Sector Show User 01 01
Transfer) Mode
PIO Mode Show User 00 00
DMA Mode Show User 00 00
S.M.A.R.T. Show User 00 00
32Bit Data Transfer Show User 00 01
ARMD Emulation Type Show User 00 00

Fifth IDE Slave :

Control Group Structure Show/ Access/ Failsafe value Optimal value
Name Hide Usage Sel Option Name Sel Option Name

BIOS SETUP UTILITY Show Title
5th IDE Slave Show Normal
-------Separator------- Show Single Line
Device : Show No Refresh
Vendor : Show No Refresh
Size : Show No Refresh
LBA Mode : Show No Refresh
Block Mode: Show No Refresh
PIO Mode : Show No Refresh
Async DMA : Show No Refresh
Ultra DMA : Show No Refresh
S.M.A.R.T.: Show No Refresh
A new device has been Show No Refresh
detected. Please reboot.
-------Separator------- Show Single Line
LBA/Large Mode Show User 01 01
Block (Multi-Sector Show User 01 01
Transfer) Mode
PIO Mode Show User 00 00
DMA Mode Show User 00 00
S.M.A.R.T. Show User 00 00
32Bit Data Transfer Show User 00 01
ARMD Emulation Type Show User 00 00

Sixth IDE Master :

Control Group Structure Show/ Access/ Failsafe value Optimal value
Name Hide Usage Sel Option Name Sel Option Name

BIOS SETUP UTILITY Show Title
6th IDE Master Show Normal
-------Separator------- Show Single Line
Device : Show No Refresh
Vendor : Show No Refresh
Size : Show No Refresh
LBA Mode : Show No Refresh
Block Mode: Show No Refresh
PIO Mode : Show No Refresh
Async DMA : Show No Refresh
Ultra DMA : Show No Refresh
S.M.A.R.T.: Show No Refresh
A new device has been Show No Refresh
detected. Please reboot.
-------Separator------- Show Single Line
LBA/Large Mode Show User 01 01
Block (Multi-Sector Show User 01 01
Transfer) Mode
PIO Mode Show User 00 00
DMA Mode Show User 00 00
S.M.A.R.T. Show User 00 00
32Bit Data Transfer Show User 00 01
ARMD Emulation Type Show User 00 00

Sixth IDE Slave :

Control Group Structure Show/ Access/ Failsafe value Optimal value
Name Hide Usage Sel Option Name Sel Option Name

BIOS SETUP UTILITY Show Title
6th IDE Slave Show Normal
-------Separator------- Show Single Line
Device : Show No Refresh
Vendor : Show No Refresh
Size : Show No Refresh
LBA Mode : Show No Refresh
Block Mode: Show No Refresh
PIO Mode : Show No Refresh
Async DMA : Show No Refresh
Ultra DMA : Show No Refresh
S.M.A.R.T.: Show No Refresh
A new device has been Show No Refresh
detected. Please reboot.
-------Separator------- Show Single Line
LBA/Large Mode Show User 01 01
Block (Multi-Sector Show User 01 01
Transfer) Mode
PIO Mode Show User 00 00
DMA Mode Show User 00 00
S.M.A.R.T. Show User 00 00
32Bit Data Transfer Show User 00 01
ARMD Emulation Type Show User 00 00

SuperIO Configuration

Control Group Structure Show/ Access/ Failsafe value Optimal value
Name Hide Usage Sel Option Name Sel Option Name

BIOS SETUP UTILITY Show Title
Configure Win667HG Super IO Show Normal
Chipset
-------Separator------- Show Single Line
OnBoard Floppy Controller HiddenUser 01 Disabled 01 Disabled
Serial Port1 Address Show User 02 02
Serial Port2 Address HiddenUser 01 01
Serial Port2 Mode Show User 00 00
IR I/O Pin Select Show User 00 00
IR Duplex Mode Show User 01 01
Parallel Port Address HiddenUser 01 01
Parallel Port Mode Show User 00 00
EPP Version Show User 00 00
ECP Mode DMA Channel Show User 03 03
Parallel Port IRQ Show User 01 01

Hardware Health Configuration

Control Group Structure Show/ Access/ Failsafe value Optimal value
Name Hide Usage Sel Option Name Sel Option Name

BIOS SETUP UTILITY Show Title
Hardware Health Show Normal
Configuration
-------Separator------- Show Single Line
CPU Temperature Show Refresh
:
-------Separator------- Show Blank Line
CPUFAN Speed Show Refresh
:
-------Separator------- Show Blank Line
CPU SMART FAN Mode Show User 01 Enabled 01 Enabled
Shutdown Temperature Show User 00 Disabled 00 Disabled
Shutdown Temperature Show User
CONTROL

APM Configuration

Control Group Structure Show/ Access/ Failsafe value Optimal value
Name Hide Usage Sel Option Name Sel Option Name

BIOS SETUP UTILITY Show Title
APM Configuration Show Normal
-------Separator------- Show Single Line
Resume On RTC Alarm Show User 00 Disabled 00 Disabled
RTC Alarm Date (Days) Show User 0F 0F
System Time Show User
Ring wake up support Show User 00 Disabled 00 Disabled

Boot

Control Group Structure Show/ Access/ Failsafe value Optimal value
Name Hide Usage Sel Option Name Sel Option Name

BIOS SETUP UTILITY Show Title
Boot Settings Show Normal
-------Separator------- Show Single Line

Boot Settings Configuration

Control Group Structure Show/ Access/ Failsafe value Optimal value
Name Hide Usage Sel Option Name Sel Option Name

BIOS SETUP UTILITY Show Title
Boot Settings Configuration Show Normal
-------Separator------- Show Single Line
Quick Boot HiddenExtended User 01 Enabled 01 Enabled
Quiet Boot Show Extended User 01 Enabled 01 Enabled
AddOn ROM Display Mode HiddenUser 00 Force BIOS 00 Force BIOS
Bootup Num-Lock Show User 01 On 01 On
PS/2 Mouse Support HiddenUser 00 Disabled 00 Disabled
Wait For 'F1' If Error HiddenUser 01 Enabled 01 Enabled
Hit 'DEL' Message Display HiddenUser 01 Enabled 01 Enabled
Interrupt 19 Capture HiddenUser 00 Disabled 00 Disabled

Boot Device Priority

Control Group Structure Show/ Access/ Failsafe value Optimal value
Name Hide Usage Sel Option Name Sel Option Name

BIOS SETUP UTILITY Show Title
Boot Device Priority Show Normal
-------Separator------- Show Single Line
1st Boot Device Show User 00 00
2nd Boot Device Show User 01 01
3rd Boot Device Show User 02 02
4th Boot Device Show User 03 03
5th Boot Device Show User 04 04
6th Boot Device Show User 05 05
7th Boot Device Show User 06 06
8th Boot Device Show User 07 07
9th Boot Device Show User 08 08
10th Boot Device Show User 09 09
11th Boot Device Show User 0A 0A
12th Boot Device Show User 0B 0B

Hard Disk Drives

Control Group Structure Show/ Access/ Failsafe value Optimal value
Name Hide Usage Sel Option Name Sel Option Name

BIOS SETUP UTILITY Show Title
Hard Disk Drives Show Normal
-------Separator------- Show Single Line
1st Drive Show User 00 00
2nd Drive Show User 01 01
3rd Drive Show User 02 02
4th Drive Show User 03 03
5th Drive Show User 04 04
6th Drive Show User 05 05
7th Drive Show User 06 06
8th Drive Show User 07 07
9th Drive Show User 08 08
10th Drive Show User 09 09
11th Drive Show User 0A 0A
12th Drive Show User 0B 0B

Removable Drives

Control Group Structure Show/ Access/ Failsafe value Optimal value
Name Hide Usage Sel Option Name Sel Option Name

BIOS SETUP UTILITY Show Title
Removable Drives Show Normal
-------Separator------- Show Single Line
1st Drive Show User 00 00
2nd Drive Show User 01 01
3rd Drive Show User 02 02
4th Drive Show User 03 03

CD/DVD Drives

Control Group Structure Show/ Access/ Failsafe value Optimal value
Name Hide Usage Sel Option Name Sel Option Name

BIOS SETUP UTILITY Show Title
CD/DVD Drives Show Normal
-------Separator------- Show Single Line
1st Drive Show User 00 00
2nd Drive Show User 01 01
3rd Drive Show User 02 02
4th Drive Show User 03 03

USB Drives

Control Group Structure Show/ Access/ Failsafe value Optimal value
Name Hide Usage Sel Option Name Sel Option Name

BIOS SETUP UTILITY Show Title
USB Drives Show Normal
-------Separator------- Show Single Line
1st Drive Show User 00 00
2nd Drive Show User 01 01
3rd Drive Show User 02 02
4th Drive Show User 03 03

Security

Control Group Structure Show/ Access/ Failsafe value Optimal value
Name Hide Usage Sel Option Name Sel Option Name

BIOS SETUP UTILITY Show Title
Security Settings Show Normal
-------Separator------- Show Single Line
Supervisor Password : Show No Refresh
User Password : Show No Refresh
-------Separator------- Show Blank Line
Change Supervisor Password Show Supervisor
User Access Level Show Supervisor 03 03
Change User Password Show User
Password Check Show User 00 00
-------Separator------- Show Blank Line
Boot Sector Virus Protection HiddenUser 00 Disabled 00 Disabled

Clear User Password

Control Group Structure Show/ Access/ Failsafe value Optimal value
Name Hide Usage Sel Option Name Sel Option Name

Chipset

Control Group Structure Show/ Access/ Failsafe value Optimal value
Name Hide Usage Sel Option Name Sel Option Name

BIOS SETUP UTILITY Show Title
Advanced Chipset Settings Show Normal
-------Separator------- Show Single Line
WARNING: Setting wrong Show Normal
values in below sections
may cause system to Show Normal
malfunction.
-------Separator------- Show Blank Line

North Bridge Configuration

Control Group Structure Show/ Access/ Failsafe value Optimal value
Name Hide Usage Sel Option Name Sel Option Name

BIOS SETUP UTILITY Show Title
North Bridge Chipset Show Normal
Configuration
-------Separator------- Show Single Line
Memory Hole HiddenUser 00 Disabled 00 Disabled
Boots Graphic Adapter HiddenUser 04 04
Priority
Internal Graphics Mode Show User 08 08
Select
Max TOLUD HiddenUser 00 3G Bytes 00 3G Bytes
Gfx Low Power Mode HiddenUser 01 Enabled 01 Enabled
-------Separator------- Show Blank Line

Video Function Configuration

Control Group Structure Show/ Access/ Failsafe value Optimal value
Name Hide Usage Sel Option Name Sel Option Name

BIOS SETUP UTILITY Show Title
Video Function Configuration Show Normal
-------Separator------- Show Single Line
DVMT Mode Select Show User 01 01
DVMT/FIXED Memory Show User 02 02
PAVP Mode Show User 00 00
-------Separator------- Show Blank Line
HDCP Support HiddenUser 01 Enabled 01 Enabled

South Bridge Configuration

Control Group Structure Show/ Access/ Failsafe value Optimal value
Name Hide Usage Sel Option Name Sel Option Name

BIOS SETUP UTILITY Show Title
South Bridge Chipset Show Normal
Configuration
-------Separator------- Show Single Line
USB Functions HiddenUser 06 12 USB Ports 06 12 USB Ports
USB Port Configure HiddenUser 00 6X6 USB Ports 00 6X6 USB Ports
USB 2.0 Controller HiddenUser 00 00
GbE Controller HiddenUser 00 00
GbE LAN Boot Show User 01 01
GbE Wake Up From S5 HiddenUser 00 00
HDA Controller Show User 00 Enabled 00 Enabled
SMBUS Controller HiddenUser 00 Enabled 00 Enabled
-------Separator------- Show Blank Line
SLP_S4# Min. Assertion Width HiddenUser 00 4 to 5 seconds00 4 to 5 seconds
Restore on AC Power Loss Show User 00 Power Off 00 Power Off
-------Separator------- Show Blank Line
PCIE Port 0 HiddenUser 00 Auto 00 Auto
PCIE Port 1 HiddenUser 00 Auto 00 Auto
PCIE Port 2 HiddenUser 00 Auto 00 Auto
PCIE Port 3 HiddenUser 00 Auto 00 Auto
PCIE Port 4 HiddenUser 00 Auto 00 Auto
PCIE High Priority Port HiddenUser 00 Disabled 00 Disabled
-------Separator------- Show Blank Line
PCIE Port 0 IOxAPIC Enable HiddenUser 00 Disabled 00 Disabled
PCIE Port 1 IOxAPIC Enable HiddenUser 00 Disabled 00 Disabled
PCIE Port 2 IOxAPIC Enable HiddenUser 00 Disabled 00 Disabled
PCIE Port 3 IOxAPIC Enable HiddenUser 00 Disabled 00 Disabled
PCIE Port 4 IOxAPIC Enable HiddenUser 00 Disabled 00 Disabled
PCIE Port 5 IOxAPIC Enable HiddenUser 00 Disabled 00 Disabled

Exit

Control Group Structure Show/ Access/ Failsafe value Optimal value
Name Hide Usage Sel Option Name Sel Option Name

BIOS SETUP UTILITY Show Title
Exit Options Show Normal
-------Separator------- Show Single Line
-------Separator------- Show Blank Line

Save Changes and Exit

Control Group Structure Show/ Access/ Failsafe value Optimal value
Name Hide Usage Sel Option Name Sel Option Name

Discard Changes and Exit

Control Group Structure Show/ Access/ Failsafe value Optimal value
Name Hide Usage Sel Option Name Sel Option Name

Discard Changes

Control Group Structure Show/ Access/ Failsafe value Optimal value
Name Hide Usage Sel Option Name Sel Option Name

Load Optimal Defaults

Control Group Structure Show/ Access/ Failsafe value Optimal value
Name Hide Usage Sel Option Name Sel Option Name

BIOS FEATURES

BIOS Date : 12/21/09
BIOS Version : 0800
Major Version : 01
Minor Version : 00
BIOS Size : 1024 KB
Processor : 6
Reference Number : 000001
BIOS Tag : CTGAO102

SignOn Message :
AMIBIOS(C)2006 American Megatrends, Inc.
BIOS Date: 12/21/09 23:45:31 Ver: i45GMt-HR R1.02 Dec.21.2009

P6 Microcode Patches :

OEM DATA AREA

00 : 52 4D 20 70 6C 63 00 00 - 00 00 00 00 00 00 00 00 RM plc..........
10 : 00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
20 : 00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
30 : 00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 ..............

REGISTER TABLES

POST/RUNTIME SIO Table

SIO Register Value

07h 00h
30h 00h
07h 01h
71h 02h
30h 00h
07h 02h
30h 00h
07h 03h
30h 00h
07h 00h
2Dh 00h
07h 0Dh
ECh 21h
07h 0Ah
E4h 30h

Onboard PCI IDE Init Values

Register Data

IDE Recovery Time-33MHzPCIClk

PIO Mode Recovery Clk

01h 04h
02h 04h
03h 03h
04h 01h
05h 01h
06h 01h

IDE IORDY Time-33MHzPCIClk

PIO Mode IORDY Clocks

01h 05h
02h 04h
03h 03h
04h 03h
05h 03h
06h 03h

BootBlock SIO Table

SIO Register Value

22h FFh
24h 58h
27h E0h
28h 70h
29h 00h
2Ah 00h
2Bh 7Fh
2Dh 00h
2Ch 8Ah
07h 00h
30h 00h
07h 05h
30h 01h
60h 00h
61h 60h
62h 00h
63h 64h
70h 01h
72h 0Ch
F0h 83h
07h 06h
60h 03h
61h E0h
62h 0Ah
63h 00h
70h 03h
30h 01h
30h 00h
07h 07h
30h 00h
07h 08h
30h 00h
30h 00h
07h 09h
30h 05h
E0h FFh
E1h 00h
E2h 00h
F0h FFh
F1h 00h
F2h 00h
F3h 42h
FEh 07h
07h 0Ah
E4h 30h
E5h 00h
E9h 00h
F2h 7Dh
FEh 00h
07h 0Bh
30h 01h
60h 02h
61h 90h
30h 01h
07h 0Ch
F1h 4Ch
E0h 00h
E1h 48h
E2h 48h
E3h 48h
E4h 48h
E5h 00h
E6h 00h

End of Report

Il microcodice è possibile aggiornarlo per le cpu desktop, per inserire anche le cpu notebook vanno aggiornati altri parametri (es. tabella vcore e memory mapping) di cui non ho database ne tanto meno moduli pronti di Aopen.
La funzione IDA (Intel Dynamic Acceleration) non è presente e non è possibile inserirla, va ricompilato il bios e per tale operazione serveno i codici sorgenti del bios da modificare in "visual eBios", della ROM non me ne faccio nulla.
Ma utilizzare un altra mobo più idonea all'OC? perchè proprio questa?

Matthew8

Labview ha scritto:

Il microcodice è possibile aggiornarlo per le cpu desktop, per inserire anche le cpu notebook vanno aggiornati altri parametri (es. tabella vcore e memory mapping) di cui non ho database ne tanto meno moduli pronti di Aopen.

La funzione IDA (Intel Dynamic Acceleration) non è presente e non è possibile inserirla, va ricompilato il bios e per tale operazione serveno i codici sorgenti del bios da modificare in "visual eBios", della ROM non me ne faccio nulla.

Ma utilizzare un altra mobo più idonea all'OC? perchè proprio questa?

Ciao,

1-E' una mainboard che supporta solo cpu notebook, mobile Core 2 duo 45nm e 65nm Socket P. Praticamente una piattaforma Mini-ITX per computer fissi fatta però per ospitare CPU Notebook e ram SO-DIMM. CPU desktop ovviamente non ci vanno.

Non me ne intendo affatto di bios, ma poichè mi ero accordo che la mod. dei pin BSEL funzionava solo sulle CPU Celeron 900 e 925 (45nm) metre su tutte le altre CPU No...

La mia vana speranza era che si potesse "copiare" alcune impostazioni del Celeron 900 su un altra CPU Dual Core tipo T8100 o T6600 e / o che si potesse sbloccare qualcosa nel bios che impediva il funzionamento. In fin dei conti è strano che sul Celeron Và e sulle altre no, sono CPU identiche eccetto per il numero di Core.

Intel deve aver messo qualche blocco credo.

3- Non vi sono molte alternative a questa mainboard.. Il Socket P è x notebook, e di solito nessuno produce mainboard notebook da overclock.

AOpen, e qualche altro produttore (Jetway, Dell) hanno avuto l'idea di produrre qualche mainboard per PC Fissi basata su tale socket, Come questa... Ma credo nessuna sia predisposta all'overclock

L'obiettivo è fare tutti i WR su hwbot con tutte le CPU Socket P mobile, per portare un bel fracco di punti al Ns. team overclock. In parte ci stò riuscendo anche così.

Labview

Grazie per le spiegazioni, ora è tutto molto più chiaro...

Ti confermo che non ci sono parti nascoste del menù ne tanto meno applicazioni disabilitate, purtroppo non posso aggiungere sezioni del menù per ulteriori setting perchè va modificata la struttura e la conseguente ricompilazione del bios, l'unico modo è interagire con software di terze parti da windows.

Matthew8

Labview ha scritto:

Grazie per le spiegazioni, ora è tutto molto più chiaro...
Ti confermo che non ci sono parti nascoste del menù ne tanto meno applicazioni disabilitate, purtroppo non posso aggiungere sezioni del menù per ulteriori setting perchè va modificata la struttura e la conseguente ricompilazione del bios, l'unico modo è interagire con software di terze parti da windows.

Cercherò di arrangiarmi in qualche modo, grazie comunque.

Proverò a manipolare le impostazioni da Windows tramite programmi quali Bar Edit e wpcredit x vedere se ne esce qualcosa, anche se in mezzo a tutte quelle stringhe esadecimali è un pò difficile orientarsi, mi aiuterò con il datasheet del chipset.

Mi domando se l'IDA sia attivabile da Windows in qualche modo, suppongo però di no, poichè ho provato Rmclock e Throttlestop come utility, entrambi mi fanno settare la modalità IDA ma però poi non funziona, il moltiplicatore non cambia. Sicuramente sarà perchè non l'hanno inserita nel bios.

Modificare BIOS AMI per poter scegliere una Frequenza RAM più bassa.. è possibile ??

BIOS MODULES

BIOS Version: 0800 BIOS Date: 12/21/09 BIOS Tag : CTGAO102 BIOS Size: 1024 KB

ModuleID/ModuleName RomLoc SourceSize SizeInROM %% RunLoc

BIOS MODULES IN THE NON-CRITICAL BLOCK

ModuleID/ModuleName RomLoc SourceSize SizeInROM %% RunLoc

55 User Defined 000E0020 7FC0(32704) 7FD4(32724) 00.00 Dynamic

BIOS PCI IRQ ROUTING TABLE

INT Pin A INT Pin B INT Pin C INT Pin D Bus# Device# Reg# BitMap Reg# BitMap Reg# BitMap Reg# BitMap Slot

BIOS ROM DATA AREA

SETUP SCREENS

SETUP STRUCTURES

Main

Control Group Structure Show/ Access/ Failsafe value Optimal value Name Hide Usage Sel Option Name Sel Option Name

Advanced

Control Group Structure Show/ Access/ Failsafe value Optimal value Name Hide Usage Sel Option Name Sel Option Name

IDE Configuration

Control Group Structure Show/ Access/ Failsafe value Optimal value Name Hide Usage Sel Option Name Sel Option Name

Primary IDE Master :

Control Group Structure Show/ Access/ Failsafe value Optimal value Name Hide Usage Sel Option Name Sel Option Name

Primary IDE Slave :

Control Group Structure Show/ Access/ Failsafe value Optimal value Name Hide Usage Sel Option Name Sel Option Name

Secondary IDE Master :

Control Group Structure Show/ Access/ Failsafe value Optimal value Name Hide Usage Sel Option Name Sel Option Name

Secondary IDE Slave :

Control Group Structure Show/ Access/ Failsafe value Optimal value Name Hide Usage Sel Option Name Sel Option Name

Third IDE Master :

Control Group Structure Show/ Access/ Failsafe value Optimal value Name Hide Usage Sel Option Name Sel Option Name

Third IDE Slave :

Control Group Structure Show/ Access/ Failsafe value Optimal value Name Hide Usage Sel Option Name Sel Option Name

Fourth IDE Master :

Control Group Structure Show/ Access/ Failsafe value Optimal value Name Hide Usage Sel Option Name Sel Option Name

Fourth IDE Slave :

Control Group Structure Show/ Access/ Failsafe value Optimal value Name Hide Usage Sel Option Name Sel Option Name

Fifth IDE Master :

Control Group Structure Show/ Access/ Failsafe value Optimal value Name Hide Usage Sel Option Name Sel Option Name

Fifth IDE Slave :

Control Group Structure Show/ Access/ Failsafe value Optimal value Name Hide Usage Sel Option Name Sel Option Name

Sixth IDE Master :

Control Group Structure Show/ Access/ Failsafe value Optimal value Name Hide Usage Sel Option Name Sel Option Name

Sixth IDE Slave :

Control Group Structure Show/ Access/ Failsafe value Optimal value Name Hide Usage Sel Option Name Sel Option Name

SuperIO Configuration

Control Group Structure Show/ Access/ Failsafe value Optimal value Name Hide Usage Sel Option Name Sel Option Name

Hardware Health Configuration

Control Group Structure Show/ Access/ Failsafe value Optimal value Name Hide Usage Sel Option Name Sel Option Name

APM Configuration

Control Group Structure Show/ Access/ Failsafe value Optimal value Name Hide Usage Sel Option Name Sel Option Name

BIOS SETUP UTILITY Show Title APM Configuration Show Normal -------Separator------- Show Single Line Resume On RTC Alarm Show User 00 Disabled 00 Disabled RTC Alarm Date (Days) Show User 0F 0F System Time Show User Ring wake up support Show User 00 Disabled 00 Disabled

Boot

Control Group Structure Show/ Access/ Failsafe value Optimal value Name Hide Usage Sel Option Name Sel Option Name

BIOS SETUP UTILITY Show Title Boot Settings Show Normal -------Separator------- Show Single Line

Boot Settings Configuration

Control Group Structure Show/ Access/ Failsafe value Optimal value Name Hide Usage Sel Option Name Sel Option Name

Boot Device Priority

Control Group Structure Show/ Access/ Failsafe value Optimal value Name Hide Usage Sel Option Name Sel Option Name

Hard Disk Drives

Control Group Structure Show/ Access/ Failsafe value Optimal value Name Hide Usage Sel Option Name Sel Option Name

Removable Drives

Control Group Structure Show/ Access/ Failsafe value Optimal value Name Hide Usage Sel Option Name Sel Option Name

BIOS SETUP UTILITY Show Title Removable Drives Show Normal -------Separator------- Show Single Line 1st Drive Show User 00 00 2nd Drive Show User 01 01 3rd Drive Show User 02 02 4th Drive Show User 03 03

CD/DVD Drives

Control Group Structure Show/ Access/ Failsafe value Optimal value Name Hide Usage Sel Option Name Sel Option Name

BIOS SETUP UTILITY Show Title CD/DVD Drives Show Normal -------Separator------- Show Single Line 1st Drive Show User 00 00 2nd Drive Show User 01 01 3rd Drive Show User 02 02 4th Drive Show User 03 03

USB Drives

Control Group Structure Show/ Access/ Failsafe value Optimal value Name Hide Usage Sel Option Name Sel Option Name

BIOS SETUP UTILITY Show Title USB Drives Show Normal -------Separator------- Show Single Line 1st Drive Show User 00 00 2nd Drive Show User 01 01 3rd Drive Show User 02 02 4th Drive Show User 03 03

Security

Control Group Structure Show/ Access/ Failsafe value Optimal value Name Hide Usage Sel Option Name Sel Option Name

Clear User Password

Control Group Structure Show/ Access/ Failsafe value Optimal value Name Hide Usage Sel Option Name Sel Option Name

Chipset

Control Group Structure Show/ Access/ Failsafe value Optimal value Name Hide Usage Sel Option Name Sel Option Name

BIOS SETUP UTILITY Show Title Advanced Chipset Settings Show Normal -------Separator------- Show Single Line WARNING: Setting wrong Show Normal values in below sections may cause system to Show Normal malfunction. -------Separator------- Show Blank Line

North Bridge Configuration

Control Group Structure Show/ Access/ Failsafe value Optimal value Name Hide Usage Sel Option Name Sel Option Name

Video Function Configuration

Control Group Structure Show/ Access/ Failsafe value Optimal value Name Hide Usage Sel Option Name Sel Option Name

BIOS SETUP UTILITY Show Title Video Function Configuration Show Normal -------Separator------- Show Single Line DVMT Mode Select Show User 01 01 DVMT/FIXED Memory Show User 02 02 PAVP Mode Show User 00 00 -------Separator------- Show Blank Line HDCP Support HiddenUser 01 Enabled 01 Enabled

South Bridge Configuration

BIOS Version: 0800 BIOS Date: 12/21/09
BIOS Tag : CTGAO102 BIOS Size: 1024 KB

INT Pin A INT Pin B INT Pin C INT Pin D
Bus# Device# Reg# BitMap Reg# BitMap Reg# BitMap Reg# BitMap Slot

Control Group Structure Show/ Access/ Failsafe value Optimal value
Name Hide Usage Sel Option Name Sel Option Name

Control Group Structure Show/ Access/ Failsafe value Optimal value
Name Hide Usage Sel Option Name Sel Option Name

Control Group Structure Show/ Access/ Failsafe value Optimal value
Name Hide Usage Sel Option Name Sel Option Name

Control Group Structure Show/ Access/ Failsafe value Optimal value
Name Hide Usage Sel Option Name Sel Option Name

Control Group Structure Show/ Access/ Failsafe value Optimal value
Name Hide Usage Sel Option Name Sel Option Name

Control Group Structure Show/ Access/ Failsafe value Optimal value
Name Hide Usage Sel Option Name Sel Option Name

Control Group Structure Show/ Access/ Failsafe value Optimal value
Name Hide Usage Sel Option Name Sel Option Name

Control Group Structure Show/ Access/ Failsafe value Optimal value
Name Hide Usage Sel Option Name Sel Option Name

Control Group Structure Show/ Access/ Failsafe value Optimal value
Name Hide Usage Sel Option Name Sel Option Name

Control Group Structure Show/ Access/ Failsafe value Optimal value
Name Hide Usage Sel Option Name Sel Option Name

Control Group Structure Show/ Access/ Failsafe value Optimal value
Name Hide Usage Sel Option Name Sel Option Name

Control Group Structure Show/ Access/ Failsafe value Optimal value
Name Hide Usage Sel Option Name Sel Option Name

Control Group Structure Show/ Access/ Failsafe value Optimal value
Name Hide Usage Sel Option Name Sel Option Name

Control Group Structure Show/ Access/ Failsafe value Optimal value
Name Hide Usage Sel Option Name Sel Option Name

Control Group Structure Show/ Access/ Failsafe value Optimal value
Name Hide Usage Sel Option Name Sel Option Name

Control Group Structure Show/ Access/ Failsafe value Optimal value
Name Hide Usage Sel Option Name Sel Option Name

Control Group Structure Show/ Access/ Failsafe value Optimal value
Name Hide Usage Sel Option Name Sel Option Name

Control Group Structure Show/ Access/ Failsafe value Optimal value
Name Hide Usage Sel Option Name Sel Option Name

BIOS SETUP UTILITY Show Title
APM Configuration Show Normal
-------Separator------- Show Single Line
Resume On RTC Alarm Show User 00 Disabled 00 Disabled
RTC Alarm Date (Days) Show User 0F 0F
System Time Show User
Ring wake up support Show User 00 Disabled 00 Disabled

Control Group Structure Show/ Access/ Failsafe value Optimal value
Name Hide Usage Sel Option Name Sel Option Name

BIOS SETUP UTILITY Show Title
Boot Settings Show Normal
-------Separator------- Show Single Line

Control Group Structure Show/ Access/ Failsafe value Optimal value
Name Hide Usage Sel Option Name Sel Option Name

Control Group Structure Show/ Access/ Failsafe value Optimal value
Name Hide Usage Sel Option Name Sel Option Name

Control Group Structure Show/ Access/ Failsafe value Optimal value
Name Hide Usage Sel Option Name Sel Option Name

Control Group Structure Show/ Access/ Failsafe value Optimal value
Name Hide Usage Sel Option Name Sel Option Name

BIOS SETUP UTILITY Show Title
Removable Drives Show Normal
-------Separator------- Show Single Line
1st Drive Show User 00 00
2nd Drive Show User 01 01
3rd Drive Show User 02 02
4th Drive Show User 03 03

Control Group Structure Show/ Access/ Failsafe value Optimal value
Name Hide Usage Sel Option Name Sel Option Name

BIOS SETUP UTILITY Show Title
CD/DVD Drives Show Normal
-------Separator------- Show Single Line
1st Drive Show User 00 00
2nd Drive Show User 01 01
3rd Drive Show User 02 02
4th Drive Show User 03 03

Control Group Structure Show/ Access/ Failsafe value Optimal value
Name Hide Usage Sel Option Name Sel Option Name

BIOS SETUP UTILITY Show Title
USB Drives Show Normal
-------Separator------- Show Single Line
1st Drive Show User 00 00
2nd Drive Show User 01 01
3rd Drive Show User 02 02
4th Drive Show User 03 03

Control Group Structure Show/ Access/ Failsafe value Optimal value
Name Hide Usage Sel Option Name Sel Option Name

Control Group Structure Show/ Access/ Failsafe value Optimal value
Name Hide Usage Sel Option Name Sel Option Name

Control Group Structure Show/ Access/ Failsafe value Optimal value
Name Hide Usage Sel Option Name Sel Option Name

BIOS SETUP UTILITY Show Title
Advanced Chipset Settings Show Normal
-------Separator------- Show Single Line
WARNING: Setting wrong Show Normal
values in below sections
may cause system to Show Normal
malfunction.
-------Separator------- Show Blank Line

Control Group Structure Show/ Access/ Failsafe value Optimal value
Name Hide Usage Sel Option Name Sel Option Name

Control Group Structure Show/ Access/ Failsafe value Optimal value
Name Hide Usage Sel Option Name Sel Option Name

BIOS SETUP UTILITY Show Title
Video Function Configuration Show Normal
-------Separator------- Show Single Line
DVMT Mode Select Show User 01 01
DVMT/FIXED Memory Show User 02 02
PAVP Mode Show User 00 00
-------Separator------- Show Blank Line
HDCP Support HiddenUser 01 Enabled 01 Enabled

Control Group Structure Show/ Access/ Failsafe value Optimal value
Name Hide Usage Sel Option Name Sel Option Name

Control Group Structure Show/ Access/ Failsafe value Optimal value
Name Hide Usage Sel Option Name Sel Option Name

BIOS SETUP UTILITY Show Title
Exit Options Show Normal
-------Separator------- Show Single Line
-------Separator------- Show Blank Line

Control Group Structure Show/ Access/ Failsafe value Optimal value
Name Hide Usage Sel Option Name Sel Option Name

Control Group Structure Show/ Access/ Failsafe value Optimal value
Name Hide Usage Sel Option Name Sel Option Name

Control Group Structure Show/ Access/ Failsafe value Optimal value
Name Hide Usage Sel Option Name Sel Option Name

Control Group Structure Show/ Access/ Failsafe value Optimal value
Name Hide Usage Sel Option Name Sel Option Name

07h 00h
30h 00h
07h 01h
71h 02h
30h 00h
07h 02h
30h 00h
07h 03h
30h 00h
07h 00h
2Dh 00h
07h 0Dh
ECh 21h
07h 0Ah
E4h 30h

01h 04h
02h 04h
03h 03h
04h 01h
05h 01h
06h 01h

01h 05h
02h 04h
03h 03h
04h 03h
05h 03h
06h 03h