[Thread Ufficiale] ASRock Chipset INTEL X99

ugo1

Ciao,

ho appena venduto il i7-920 e quindi sono in cerca di nuova motherboard stavo pensando alla X99 ws (per via della doppia lan intel)

ho bisogno che sia in grado si supportare:

1- Una scheda video

2- una scheda di acquisizione blackmagick con interfaccia Pcie x4

3- una scheda firewire

4- ssd NVME

come processore prenderei il 5820k... sono sufficienti le 28 linee? Come disporresti le schede di cui sopra?

Pur non essendo fan delle configurazioni dual gpu nel caso in futuro decidessi di prendere una seconda GPU è possibile mantenere la configurazione di cui sopra (ovviamente facendo upgrade della cpu con una a 40 linee) anche in considerazione che lo slot pcie 3 viene disabilitato dal disco NVME e le schede video occupano due slot? O sarebbe necessario passare alla X99 ws-e?

Grazie

Ugo

tom1

budget

ugo1

tom1 ha scritto:

budget

per budget 1500. Il disco nvme può aspettare per ora. Ma vorrei una motherboard "durevole" nel tempo. ho già scheda grafica e mi serve un disco da 250 per il sistema operativo e programmi e un ssd da 1tb per l'acquisizione in 422 10 bit uncompressed (utilizzerei i crucial mx200 con cui mi trovo bene). La ram punterei a 32 gb per il 4k.

inoltre il fatto che sta per uscire la serie 6 punterei al 5820 visto che per ora utilizzo solo una scheda grafica

Ugo

Labview

Se hai in previsione uno SLI futuro con un cambio di processore allora punterei subito sulla WS-E

ugo1

Labview ha scritto:

Se hai in previsione uno SLI futuro con un cambio di processore allora punterei subito sulla WS-E

hai ragione ma è troppo fuori budget

Labview

[TABLE=class: List]

[TR=bgcolor: white]

[TD]X99 Extreme11[/TD]

[TD]1.50[/TD]

[TD]2/2/2016[/TD]

[TD=class: Remark, align: left]1.Improve DRAM compatibility.

2.Improved PCIE compatibility.[/TD]

[/TR]

[TR=bgcolor: aliceblue]

[TD]X99 Extreme6/3.1[/TD]

[TD]1.20[/TD]

[TD]2/2/2016[/TD]

[TD=class: Remark, align: left]1.Add ME FW version in BIOS

2.Improve clear CMOS function.

3.Update network module.[/TD]

[/TR]

[TR=bgcolor: white]

[TD]X99 WS-E[/TD]

[TD]1.80[/TD]

[TD]2/2/2016[/TD]

[TD=class: Remark, align: left]1.Improve DRAM compatibility.

2.Improved PCIE compatibility.

3.Update network module.[/TD]

[/TR]

[TR=bgcolor: aliceblue]

[TD]X99 WS-E/10G[/TD]

[TD]1.80[/TD]

[TD]2/2/2016[/TD]

[TD=class: Remark, align: left]1.Improve DRAM compatibility.

2.Improved PCIE compatibility.

3.Update network module.[/TD]

[/TR]

[TR=bgcolor: white]

[TD]X99E-ITX/ac[/TD]

[TD]1.50[/TD]

[TD]2/2/2016[/TD]

[TD=class: Remark, align: left]1.Add ME FW version in BIOS.

2.Add m.2 support.

3.Add NVMe support.[/TD]

[/TR]

[TR=bgcolor: white]

[TD]Fatal1ty X99X Killer/3.1[/TD]

[TD]1.20[/TD]

[TD]2/2/2016[/TD]

[TD=class: Remark, align: left]1.Add ME FW version in BIOS

2.Improve clear CMOS function.

3.Update network module.[/TD]

[/TR]

[/TABLE]

Labview

[TABLE=class: List]

[TR=bgcolor: aliceblue]

[TD]Fatal1ty X99M Killer[/TD]

[TD]3.00[/TD]

[TD]3/23/2016[/TD]

[TD=class: Remark, align: left]Support 2016 Q2 coming new CPU.[/TD]

[/TR]

[TR=bgcolor: aliceblue]

[TD]X99 Extreme4[/TD]

[TD]3.30[/TD]

[TD]3/23/2016[/TD]

[TD=class: Remark, align: left]Support 2016 Q2 coming new CPU.[/TD]

[/TR]

[TR=bgcolor: white]

[TD]X99 Extreme4/3.1[/TD]

[TD]3.00[/TD]

[TD]3/23/2016[/TD]

[TD=class: Remark, align: left]Support 2016 Q2 coming new CPU.[/TD]

[/TR]

[TR=bgcolor: aliceblue]

[TD]X99M Extreme4[/TD]

[TD]3.00[/TD]

[TD]3/23/2016[/TD]

[TD=class: Remark, align: left]Support 2016 Q2 coming new CPU.[/TD]

[/TR]

[TR=bgcolor: aliceblue]

[TD]X99 WS[/TD]

[TD]3.10[/TD]

[TD]3/25/2016[/TD]

[TD=class: Remark, align: left]Support 2016 Q2 coming new CPU.[/TD]

[/TR]

[TR=bgcolor: white]

[TD]X99 WS-E[/TD]

[TD]3.00[/TD]

[TD]3/25/2016[/TD]

[TD=class: Remark, align: left]Support 2016 Q2 coming new CPU.[/TD]

[/TR]

[TR=bgcolor: aliceblue]

[TD]X99 WS-E/10G[/TD]

[TD]3.00[/TD]

[TD]3/25/2016[/TD]

[TD=class: Remark, align: left]Support 2016 Q2 coming new CPU.[/TD]

[/TR]

[/TABLE]

Labview

[TABLE=class: List]

[TR=bgcolor: aliceblue]

[TD]Fatal1ty X99M Killer/3.1[/TD]

[TD]3.30[/TD]

[TD]4/12/2016[/TD]

[TD=class: Remark, align: left]Support 2016 Q2 coming new CPU.[/TD]

[/TR]

[TR=bgcolor: white]

[TD]Fatal1ty X99X Killer[/TD]

[TD]3.00[/TD]

[TD]4/12/2016[/TD]

[TD=class: Remark, align: left]Support 2016 Q2 coming new CPU.[/TD]

[/TR]

[TR=bgcolor: aliceblue]

[TD]Fatal1ty X99X Killer/3.1[/TD]

[TD]3.00[/TD]

[TD]4/12/2016[/TD]

[TD=class: Remark, align: left]Support 2016 Q2 coming new CPU.[/TD]

[/TR]

[TR=bgcolor: white]

[TD]X99 Extreme11[/TD]

[TD]3.00[/TD]

[TD]4/12/2016[/TD]

[TD=class: Remark, align: left]Support 2016 Q2 coming new CPU.[/TD]

[/TR]

[TR=bgcolor: aliceblue]

[TD]X99 Extreme3[/TD]

[TD]3.30[/TD]

[TD]4/12/2016[/TD]

[TD=class: Remark, align: left]Support 2016 Q2 coming new CPU.[/TD]

[/TR]

[TR=bgcolor: white]

[TD]X99 Extreme6[/TD]

[TD]3.00[/TD]

[TD]4/12/2016[/TD]

[TD=class: Remark, align: left]Support 2016 Q2 coming new CPU.[/TD]

[/TR]

[TR=bgcolor: aliceblue]

[TD]X99 Extreme6/3.1[/TD]

[TD]3.00[/TD]

[TD]4/12/2016[/TD]

[TD=class: Remark, align: left]Support 2016 Q2 coming new CPU.[/TD]

[/TR]

[TR=bgcolor: white]

[TD]X99E-ITX/ac[/TD]

[TD]3.10[/TD]

[TD]4/12/2016[/TD]

[TD=class: Remark, align: left]Support 2016 Q2 coming new CPU.[/TD]

[/TR]

[TR=bgcolor: Lavender]

[TD]Fatal1ty X99M Killer[/TD]

[TD]3.10[/TD]

[TD]4/19/2016[/TD]

[TD=class: Remark, align: left]Modify onboard LAN function.[/TD]

[/TR]

[/TABLE]

Labview

[h=2]Major BIOS Updates Allow ASRock X99 Motherboards to Support Intel Broadwell-E[/h]

Translate

TAIPEI, Taiwan, April 12, 2016 – Whether you were aware of it before or not, Intel's new line of 14 nanometer die shrink Broadwell-E processors are arriving shortly this year, and ASRock's engineers have already completed uploading new versions of BIOS for their X99 motherboards to support these Intel Broadwell-E CPUs. Clearly the new chips aren't available in the market yet, but if patience isn't your strong suit, then perhaps you could get a two minute head start by downloading the BIOS and upgrading now.

The most unmissable part of Intel Broadwell-E is the flagship Core i7-6950X, which will be the first deca-core processor for the commercial market. While this new CPU boasts a compelling ten cores and twenty threads architecture, users require a BIOS update for their motherboards to handle it, this update applies to the rest of the Broadwell-E gang, including i7-6900K, i7-6850K and i7-6800K as well. Rest assured that ASRock's former X99 chipset motherboards will all support the new chips. Upgrade now and hold on to your horses until the new CPUs are delivered, just don't hold your breath.

Find your X99 model and download the new BIOS here:

http://www.asrock.com.tw/mb/index.asp?s=2011-3

Labview

[TABLE=class: List]

[TR=bgcolor: aliceblue]

[TD]Fatal1ty X99 Professional[/TD]

[TD]3.10[/TD]

[TD]4/22/2016[/TD]

[TD=class: Remark, align: left]Support 2016 Q2 coming new CPU.[/TD]

[/TR]

[TR=bgcolor: white]

[TD]Fatal1ty X99 Professional/3.1[/TD]

[TD]3.20[/TD]

[TD]4/22/2016[/TD]

[TD=class: Remark, align: left]Support 2016 Q2 coming new CPU.[/TD]

[/TR]

[TR=bgcolor: aliceblue]

[TD]X99 OC Formula[/TD]

[TD]3.00[/TD]

[TD]4/22/2016[/TD]

[TD=class: Remark, align: left]Support 2016 Q2 coming new CPU.[/TD]

[/TR]

[TR=bgcolor: white]

[TD]X99 OC Formula/3.1[/TD]

[TD]3.20[/TD]

[TD]4/22/2016[/TD]

[TD=class: Remark, align: left]Support 2016 Q2 coming new CPU.[/TD]

[/TR]

[/TABLE]

Labview

[TABLE=class: List]

[TR=bgcolor: aliceblue]

[TD]X99 WS-E[/TD]

[TD]3.20[/TD]

[TD]5/12/2016[/TD]

[TD=class: Remark, align: left]1.Update NTFS module.

2.Update Intel Microcode.

3.Improve DRAM compatibility.[/TD]

[/TR]

[TR=bgcolor: white]

[TD]X99 WS-E/10G[/TD]

[TD]3.20[/TD]

[TD]5/12/2016[/TD]

[TD=class: Remark, align: left]1.Update NTFS module.

2.Update Intel Microcode.

3.Improve DRAM compatibility.[/TD]

[/TR]

[/TABLE]

Labview

Computex 2016

In arrivo la nuova "X99 Professional Gaming i7"

ugo1

Ciao,

ho notato che nell'ultimo bios (3.10) della X99 WS il secondo controller di rete è nominato Atheros pcie ethernet controller

Labview

ugo1 ha scritto:

Ciao,
ho notato che nell'ultimo bios (3.10) della X99 WS il secondo controller di rete è nominato Atheros pcie ethernet controller

dove leggi atheros? nel bios o in windows?

ugo1

Labview ha scritto:

dove leggi atheros? nel bios o in windows?

da bios,

sulla riga superiore ho: on board lan 1

sulla riga inferiore ho: Atheros Pcie ethernet controller

Ugo

Labview

ugo1 ha scritto:

da bios,
sulla riga superiore ho: on board lan 1

sulla riga inferiore ho: Atheros Pcie ethernet controller

Ugo

Sicuro errore di "copia incolla" :asd:

http://www.mdclab.it/BIOS-T/X99WS.zip

Labview

[TABLE=class: List]

[TR=bgcolor: aliceblue]

[TD]X99 Extreme4/3.1[/TD]

[TD]3.10[/TD]

[TD]6/1/2016[/TD]

[TD=class: Remark, align: left]Improve system compatibility.[/TD]

[/TR]

[/TABLE]

Labview

[TABLE=class: List]

[TR=bgcolor: Lavender]

[TD]Fatal1ty X99M Killer/3.1[/TD]

[TD]3.40[/TD]

[TD]6/29/2016[/TD]

[TD=class: Remark, align: left]1.Improve DRAM compatibility.

2.Update EZ OC table.

3.Update Microcode.

4.Update NTFS module.[/TD]

[/TR]

[TR=bgcolor: aliceblue]

[TD]Fatal1ty X99M Killer[/TD]

[TD]3.20[/TD]

[TD]6/28/2016[/TD]

[TD=class: Remark, align: left]1.Improve DRAM compatibility.

2.Update EZ OC table.

3.Update Microcode.

4.Update NTFS module.[/TD]

[/TR]

[TR=bgcolor: aliceblue]

[TD]X99 Extreme4[/TD]

[TD]3.40[/TD]

[TD]6/28/2016[/TD]

[TD=class: Remark, align: left]1.Update EZ OC table.

2.Update Microcode.

3.Update NTFS module.[/TD]

[/TR]

[TR=bgcolor: white]

[TD]X99 Extreme4/3.1[/TD]

[TD]3.20[/TD]

[TD]6/28/2016[/TD]

[TD=class: Remark, align: left]1.Update EZ OC table.

2.Update Microcode.

3.Update NTFS module.[/TD]

[/TR]

[TR=bgcolor: aliceblue]

[TD]X99 Extreme6[/TD]

[TD]3.20[/TD]

[TD]6/28/2016[/TD]

[TD=class: Remark, align: left]1.Update USB module.[/TD]

[/TR]

[TR=bgcolor: white]

[TD]X99M Extreme4[/TD]

[TD]3.10[/TD]

[TD]6/28/2016[/TD]

[TD=class: Remark, align: left]1.Improve DRAM compatibility.

2.Update EZ OC table.

3.Update Microcode.

4.Update NTFS module.[/TD]

[/TR]

[/TABLE]

Labview

[TABLE=class: List]

[TR=bgcolor: aliceblue]

[TD]Fatal1ty X99 Professional[/TD]

[TD]3.20[/TD]

[TD]7/6/2016[/TD]

[TD=class: Remark, align: left]1.Update EZ OC table.

2.Update NTFS module.[/TD]

[/TR]

[TR=bgcolor: white]

[TD]Fatal1ty X99 Professional Gaming i7[/TD]

[TD]1.10[/TD]

[TD]7/6/2016[/TD]

[TD=class: Remark, align: left]First released.[/TD]

[/TR]

[TR=bgcolor: aliceblue]

[TD]Fatal1ty X99 Professional/3.1[/TD]

[TD]3.30[/TD]

[TD]7/6/2016[/TD]

[TD=class: Remark, align: left]1.Update EZ OC table.

2.Update NTFS module.[/TD]

[/TR]

[TR=bgcolor: white]

[TD]X99 OC Formula[/TD]

[TD]3.10[/TD]

[TD]7/6/2016[/TD]

[TD=class: Remark, align: left]1.Update EZ OC table.

2.Update NTFS module.[/TD]

[/TR]

[TR=bgcolor: aliceblue]

[TD]X99 OC Formula/3.1[/TD]

[TD]3.30[/TD]

[TD]7/6/2016[/TD]

[TD=class: Remark, align: left]1.Update EZ OC table.

2.Update NTFS module.[/TD]

[/TR]

[TR=bgcolor: white]

[TD]X99 Taichi[/TD]

[TD]1.10[/TD]

[TD]7/6/2016[/TD]

[TD=class: Remark, align: left]First released.[/TD]

[/TR]

[/TABLE]

ugo1

Ciao,

sulla Asrock X99 WS posso forzare uno sli con due schede video sugli slot pcie 1 e pcie 2 e farli lavorare entrambi a x16? Ipotizzando un disco NVME sugli slot Pcie 4 / pcie 5 e pci 6 posso mettere tre schede (audio + firewire + intensity pro 4k) considereando che l'ultima ha bisono di una connessione pcie x4?

Naturalmente con cpu a 40 linee

Ugo