Catalyst 6.10 definitiva

[apix_1024]

usciti da poco:

https://support.ati.com/ics/support/default.asp?deptID=894&task=knowledge&folderID=293

non male visto che siamo già al 1° novembre...:azz:

[gianni1879]

ummh considerando che a novembre devono uscire i 6.11 direi che sono un pò in ritardo solitamente escono a metà del mese, cmq li ho scaricati e domani li installo che devo formattare il pici

[gianni1879]

dimenticavo.... ma avete visto il nuovo sito di amd/ati???

mi vengono un pò i brividi era molto più bello prima

[megthebest]

gianni1879 ha scritto:

dimenticavo.... ma avete visto il nuovo sito di amd/ati???

mi vengono un pò i brividi era molto più bello prima

eh si ... era + bello primaaaaaaaaaaaaaaa:azz:

p.s. il changelog della versione 6.10 è :

Performance Improvement

As with most Catalyst releases, performance has increased in various situations. In this release of Catalyst Intel 965 Crossfire performance increases due to improvements of the Crossfire D3D driver in handling large vertex meshes. Gains of 6.7-15.8% can be seen in 3DMark2006, 9.7-10.5% in 3DMark2005 and 3DMark2003 performance improves as much as 7.1%.

Issues Resolved in Catalyst Software Suite 6.10

The following section provides a summary of the issues that are resolved in the latest release of CatalystÂ. These include:

* 3DMark2006: Setting the display resolution to 1600x1200 and AA to either 4x or 6x no longer results in display corruption being noticed when running the HDR1 test. This issue was known to occur on certain specific systems only. Further details can be found in topic number 737-23443

* Anarchy-Online: Screen corruption is no longer noticed when walking or running through the terrain. Further details can be found in topic number 737-22016

* Black & White 2: Battle of the Gods: Intermittent display corruption is no longer noticed when playing the game in a system containing an ATI Radeon X1900 series and running the Windows MCE operating system when setting the graphics options within the game to high details. Further details can be found in topic number 737-23275

* Commandos Strike Force: Enabling CrossFireâ„¢ and playing the game no longer results in display corruption being noticed when using an Intel 965 motherboard. Further details can be found in topic number 737-23444

* Godfather: Task switching between the game and the windows desktop no longer results in display corruption being noticed when playing the game at a display resolution of 1600x1200 (or higher) when having the in-game video options set to optimal quality. Further details can be found in topic number 737-23440

* Serious Sam 2: Playing the game on a system running the Windows MCE operating system and containing an ATI Radeon X1800 CrossFireâ„¢ Edition product no longer results in the operating system rebooting after approximately 20 minutes of game play when playing the game in a high setting windowed mode. Further details can be found in topic number 737-23445

* World of Warcraft: Playing the game for an extended period of time no longer results in the game failing to respond when using a Radeon X800. Further details can be found in topic number 737-22632

* Catalyst Control Center: Setting new clock values no longer results in the confirm changes dialog box failing to be displayed and clicking on cancel option may result in the new values still being applied. Further details can be found in topic number 737-23278

* Setting the display properties to prompt for a restart of the system when making a display resolution change, no longer results in the selected display resolution not being applied when clicking yes to restart the computer for the changes to take effect. Further details can be found in topic number 737-23279

* Connecting a CRT to a system containing an ATI Xpress 1150 series product followed by enabling extended desktop mode, no longer results in the both the LCD and the CRT failing to resume when attempting to resume from a standby state. Further details can be found in topic number 737-23434

* The LCD Panel Setting no longer becomes Use centered timings when resuming from suspend mode. Further details can be found in topic number 737-23435

* Display corruption is no longer noticed when switching between normal screen and full screen mode when viewing either a video or a picture slide show under the Windows Media Center Edition operating system using the Media Center application. Further details can be found in topic number 737-23436

* Installing the Catalyst software driver on a system running the Windows XP Japanese version operating system no longer results in the .NET Framework version requirement dialog box being displayed in English. Further details can be found in topic number 737-23253

* Setting the display resolution to 1400x1080 on a system running the Windows XP operating system and containing an ATI Xpress 200 series product, no longer results in the display appearing jagged. Further details can be found in topic number 737-23437

* Playing a DVD using WinDVD no longer results in display corruption being noticed within the player when resizing the player window. Further details can be found in topic number 737-23256

* The ATI VPU Recover functionality no longer fails when using an ATI Radeon X1900 series of products. Further details can be found in topic number 737-23438

* Catalyst Control Center: Clicking the Enable ATI Overdrive clocks for 3D application only button followed by selecting the Preserve ATI Overdrive Settings at log on no longer results in a VPU recover event occurring when running the Automated Clock Configuration Utility. Further details can be found in topic number 737-23439

* CrossFire™: Enabling Wait for Vsync within the Catalyst Control Center no longer results in display corruption being noticed within the 3D->Anti-aliasing aspect page when setting the pre-view to full-screen. Further details can be found in topic number 737-23441

* Catalyst Control Center: Connecting a CRT and a TV to an ATI Radeon X800 series of products no longer results in the display mode for the CRT being incorrect when selecting to swap the display devices and then cancelling the selection. Further details can be found in topic number 737-23442

Known Issues for Catalyst Software Suite 6.10

* Battlefield 2: Attempting to launch the game under Windows XP with the in-game display setting at 1920x1440 or 2048x1536 and AA set to 6x may result in the game failing to launch. Further details can be found in topic number 737-22817

* Sniper Elite: Playing the game under Windows XP with an ATI Radeon X1600 series installed may result in texture corruption being noticed. Further details can be found in topic number 737-22820

* Tomb Raider Legend: Enabling CrossFire may result in slower performance being noticed. Further details can be found in topic number 737-23448

* Enabling CrossFireâ„¢ may result in display corruption being noticed when playing a DVD or media clip using either WinDVD 7, Windows Media Player or PowerDVD 6. Further details can be found in topic number 737-22806

* Playing a DVD and switching from AC power to battery power on systems containing an ATI Radeon Xpress 1150 may result in playback lag being noticed. Further details can be found in topic number 737-23276

* Plugging a TV into s-video out connector, followed by entering to display manager and clicking detect displays may result in the TV failing to be detected. Further information can be found in topic number 737-23008

* Using the ATI Uninstall Utility to remove the display driver or Catalyst Control Center may result in portions of third party applications also being uninstalled. Further details can be found in topic number 737-23277

* Connecting two display devices on a system running the Windows MCE operating system and enabling extended desktop mode may result in display corruption being noticed when dragging and placing a window between the two display devices. Further details can be found in topic number 737-23280

* The Catalyst Control Center version number may differ between the Catalyst Control Center Software Information Center and the version number listed in the Add/Remove programs. Further details can be found in topic number 737-23281

* Catalyst Control Center->Basic View: Connecting a secondary display device and attempting to enable it, may result in the inability to enable the device when using Basic view. Further details can be found in topic number 737-23446

* Playing a DVD and switching from AC power to battery power on systems containing an ATI Radeon Xpress 1150 may result in playback lag being noticed. Further details can be found in topic number noticed - 737-23276

* Intermittent display issues may be noticed when using an Apple Cinema HD 30" display device. Contact ATI Customer Care for a solution. ATI Engineering is aware of the issue and a resolve will be available in an up-coming software driver release. Further details can be found in topic number

* During video playback, DirectX Video Acceleration (DXVA) may not be available when CrossFire mode is enabled. This will result in software mode video playback. To enable DXVA CrossFire mode must be disabled. Further details can be found in topic number 737-23447

[Cazzeggiatore]

gianni1879 ha scritto:

dimenticavo.... ma avete visto il nuovo sito di amd/ati???

mi vengono un pò i brividi era molto più bello prima

http://www.amdclockers.it/forum/f14/sito_ati-1652/

vebè dai, è mattina...

ciao

CazzZ!!!

[principino1984]

cmq si che ora fa cagare come grafica...ma è mille volte più veloce di prima!! io scarico a 1Mb/s ... prima andare a 100 o poco più era già ottimo!!

Marco

ps..nel tempo che ho scritto questo post ho finito di scaricare i 6.10... fate voi...

[megthebest]

principino1984 ha scritto:

cmq si che ora fa cagare come grafica...ma è mille volte più veloce di prima!! io scarico a 1Mb/s ... prima andare a 100 o poco più era già ottimo!!

Marco

ps..nel tempo che ho scritto questo post ho finito di scaricare i 6.10... fate voi...

sempre a fare lo sborone marco .... con la tua mega connessione te lo puoi permettere ...

cmq anche prima , quando era ati , le velocità erano cmq altissime , addirittura io usavo il sito per testarre le adsl in giro per i vari clienti

[dj883u2]

Tornando in tema....

Allora, vanno bene questi driver?

Io mi trovo molto bene!

Ciao;)

[apix_1024]

dj883u2 ha scritto:

Tornando in tema....

Allora, vanno bene questi driver?

Io mi trovo molto bene!

Ciao;)

ati tray tool funzia bene con questi driver?

[dj883u2]

apix_1024 ha scritto:

ati tray tool funzia bene con questi driver?

Si, funziona benissimo.

Metti l'ultima versione disponibile.

La scrichi da qui:

The Guru of 3D Download Section

Ciao;)

[apix_1024]

ok è quella che ho già su... bene ora li metto allora

[dj883u2]

apix_1024 ha scritto:

ok è quella che ho già su... bene ora li metto allora

Vai è fammi sapere.

Ciao;)

[apix_1024]

dj883u2 ha scritto:

Vai è fammi sapere.

Ciao;)

nulla di nuovo. vanno bene con gothic come i 6.9! magari quando mi arriva la x1950pro metto su lhdd da test e vedo se anche con la x1900gt miglioro nei test. per ora tutto ok!

una domanda: voi con le x19xx che frequenze tenete del 2d con che voltaggi così da avere una base di partenza. per ora sono a 400/[email protected]/2.086 (il voltaggio della rma non riesco a cambiarlo...) da ati tray cambiavo anche quello ma con il core sotto i 500mhz nel 2d con qualsiasi voltaggio mi si impallava con i video...

edit: ho provato a far girare un filmato e mi reimposta le frequenze ed i voltaggi di default sempre... ma lo fa anche a voi cavolo? non posso tenere un setup per il 2d a basso consumo perchè tanto non lo tiene sempre...

[dj883u2]

apix_1024 ha scritto:

nulla di nuovo. vanno bene con gothic come i 6.9! magari quando mi arriva la x1950pro metto su lhdd da test e vedo se anche con la x1900gt miglioro nei test. per ora tutto ok!

una domanda: voi con le x19xx che frequenze tenete del 2d con che voltaggi così da avere una base di partenza. per ora sono a 400/[email protected]/2.086 (il voltaggio della rma non riesco a cambiarlo...) da ati tray cambiavo anche quello ma con il core sotto i 500mhz nel 2d con qualsiasi voltaggio mi si impallava con i video...

edit: ho provato a far girare un filmato e mi reimposta le frequenze ed i voltaggi di default sempre... ma lo fa anche a voi cavolo? non posso tenere un setup per il 2d a basso consumo perchè tanto non lo tiene sempre...

Lo fa anche a me questo scherzo!

Non so come mai....

Domani controllo meglio.

Ciao;)