Salta al contenuto
  • Categorie
  • Recenti
  • Tag
  • Popolare
  • Utenti
  • Gruppi
Collassa
Logo del marchio
  1. Home
  2. Hardware
  3. CPU & Overclock
  4. OC 4.2ghz I7 950 sapphire pureblack x58 ci vuole troppo vcore, aiuto.

OC 4.2ghz I7 950 sapphire pureblack x58 ci vuole troppo vcore, aiuto.

Pianificato Fissato Bloccato Spostato CPU & Overclock
34 Post 0 Autori 3.3k Visualizzazioni
  • Da Vecchi a Nuovi
  • Da Nuovi a Vecchi
  • Più Voti
Rispondi
  • Risposta alla discussione
Effettua l'accesso per rispondere
Questa discussione è stata eliminata. Solo gli utenti con diritti di gestione possono vederla.
  • X Non in linea
    X Non in linea
    Xoriam
    scritto su ultima modifica di
    #24

    Le085 ha scritto:

    Yep, odd multipliers, if I remember well, are preferred by Nehalem CPUs.

    Had you fixed the PCIe frequency before? This is very important when raising the bclk!

    Yep Nahalem likes odd multis ^^

    1 Risposta Ultima Risposta
    0
    • X Non in linea
      X Non in linea
      Xoriam
      scritto su ultima modifica di
      #25

      so here are the exact settings on everything

      cpu 200x21 =4200

      ram 2:8 to achieve 1600mhz 9-9-9-24-2t

      qpi - 4.800gt link speed full speed

      pcie freq 103

      Uncore x16 or x18

      all powersaving off

      voltages

      LLC 100%

      CPUVcore- 1.3875 (which should be more than enough for 4,2ghz on d0 step i7 950)

      DIMM- 1.65

      CPU VTT 1.35

      IOH Vcore- 1.3

      QPI PLL 1.35

      IOH/ICH IO voltage- auto

      CPU PLL vcore- stock is 1,8 tried bringing up to 1.9 and 2.0 didnt see a diffrence, at 1.6 i saw a slight change but it might have just been a flook

      ICH vcore- auto

      DIM DQ VREF- auto

      i've changed every setting possible now, so I'm starting to think this chip just won't accept anything under 1.45vcore.

      which would suck because that means my highest possible OC is a 4,4ghz before voltages start to become dangerous.

      1 Risposta Ultima Risposta
      0
      • N Non in linea
        N Non in linea
        Nikolaj
        scritto su ultima modifica di
        #26

        Xoriam ha scritto:

        so here are the exact settings on everything

        cpu 200x21 =4200

        ram 2:8 to achieve 1600mhz 9-9-9-24-2t -> set a lower one, same timings

        qpi - 4.800gt link speed full speed

        pcie freq 103->101

        Uncore x16 or x18

        all powersaving off

        voltages

        LLC 100%

        CPUVcore- 1.3875 (which should be more than enough for 4,2ghz on d0 step i7 950) -> it could, not should

        DIMM- 1.65

        CPU VTT 1.35

        IOH Vcore- 1.3

        QPI PLL 1.35

        IOH/ICH IO voltage- auto -> should be low, if i remember correctly something like 1.18V. I should check the old bios

        CPU PLL vcore- stock is 1,8 tried bringing up to 1.9 and 2.0 didnt see a diffrence, at 1.6 i saw a slight change but it might have just been a flook -> no more than 1.86V !! Be careful

        ICH vcore- auto

        DIM DQ VREF- auto

        i've changed every setting possible now, so I'm starting to think this chip just won't accept anything under 1.45vcore.

        which would suck because that means my highest possible OC is a 4,4ghz before voltages start to become dangerous.

        I'll check the blue ones tomorrow ;)

        I think that you could have got a bad CPU, but I need to check better your mobo

        1 Risposta Ultima Risposta
        0
        • X Non in linea
          X Non in linea
          Xoriam
          scritto su ultima modifica di
          #27

          Nikolaj ha scritto:

          I'll check the blue ones tomorrow ;)

          I think that you could have got a bad CPU, but I need to check better your mobo

          Yep I'm pretty sure it is the chip as well, highest vcore i've seen needed for even a 4.3ghz oc which is higher then mine with a I7 950 on my motherboard is a 1.3875, most others were 1.31-1.35

          This chip really just doesn't care what voltage I throw at it..

          It just says give me more vcore.... -_-

          luckily my temperatures are ok, but i really wanted to optimize.

          1 Risposta Ultima Risposta
          0
          • X Non in linea
            X Non in linea
            Xoriam
            scritto su ultima modifica di
            #28

            UPDATED:

            EDITED turns out Sapphire likes to put their LLC options backwards to confuse you!

            Here are my new GOOD settings, I mean I bought this board on purpose lol....

            :perfido: now thats more like it!

            oh yeah I was stable at 4ghz 1.2vcore flat.

            Target CPU frequency- 4200mhz
            Target memory frequency- 1600mhz
            Cpu freq- 200
            Cpu Ratio- 21
            Memory frequency- DDR-1066 2:8
            Memory timing- By DDR 1600mhz 9-9-9-24-2t
            Uncore- slight oc to x18
            PCIE frequency 101
            Vcore- 1.2875
            VDIM- 1.65
            CPU VTT- 1.35
            IOH- 1.3
            QPI PLL- 1.35
            LLC- DISABLED :bang head
            All powersaving options disabled
            Max load temp in P95- 75c
            

            300

            1 Risposta Ultima Risposta
            0
            • N Non in linea
              N Non in linea
              Nikolaj
              scritto su ultima modifica di
              #29

              all right then. My suggestion ? Keep it like this, and forget.

              You've got a Nehalem at 4.0GHz, it's a lot, with a very good voltage and in stability.

              Great job :)

              1 Risposta Ultima Risposta
              0
              • X Non in linea
                X Non in linea
                Xoriam
                scritto su ultima modifica di
                #30

                Nikolaj ha scritto:

                all right then. My suggestion ? Keep it like this, and forget.

                You've got a Nehalem at 4.0GHz, it's a lot, with a very good voltage and in stability.

                Great job :)

                Thanks alot! it was alot of work to find the small problem. But in the end it's good!

                1 Risposta Ultima Risposta
                0
                • N Non in linea
                  N Non in linea
                  Nikolaj
                  scritto su ultima modifica di
                  #31

                  Nope, don't worry man. We're here to help you so feel free to share your thoughts :)

                  Have fun with such a beast !

                  1 Risposta Ultima Risposta
                  0
                  • T Non in linea
                    T Non in linea
                    tom1
                    scritto su ultima modifica di
                    #32

                    great ,now i wake up from a night veryyyy looong :D

                    1 Risposta Ultima Risposta
                    0
                    • X Non in linea
                      X Non in linea
                      Xoriam
                      scritto su ultima modifica di
                      #33

                      Nikolaj ha scritto:

                      Nope, don't worry man. We're here to help you so feel free to share your thoughts :)

                      Have fun with such a beast !

                      Ty, on monday my 7850 will arrive. so the GPU overclocking fun will begin :clapclap:

                      tom1 ha scritto:

                      great ,now i wake up from a night veryyyy looong :D

                      Lol thats exactly what it feels like, i've been glued to those BIOS for way too long.

                      1 Risposta Ultima Risposta
                      0
                      • N Non in linea
                        N Non in linea
                        Nikolaj
                        scritto su ultima modifica di
                        #34

                        hell yeah ! :)

                        A new thread with oc settings and results could be great

                        1 Risposta Ultima Risposta
                        0
                        • X Non in linea
                          X Non in linea
                          Xoriam
                          scritto su ultima modifica di
                          #35

                          Nikolaj ha scritto:

                          hell yeah ! :)

                          A new thread with oc settings and results could be great

                          Ok I will work on getting that done in a few days then. :n2mu:

                          1 Risposta Ultima Risposta
                          0

                          Ciao! Sembra che tu sia interessato a questa conversazione, ma non hai ancora un account.

                          Stanco di dover scorrere gli stessi post a ogni visita? Quando registri un account, tornerai sempre esattamente dove eri rimasto e potrai scegliere di essere avvisato delle nuove risposte (tramite email o notifica push). Potrai anche salvare segnalibri e votare i post per mostrare il tuo apprezzamento agli altri membri della comunità.

                          Con il tuo contributo, questo post potrebbe essere ancora migliore 💗

                          Registrati Accedi
                          Rispondi
                          • Risposta alla discussione
                          Effettua l'accesso per rispondere
                          • Da Vecchi a Nuovi
                          • Da Nuovi a Vecchi
                          • Più Voti


                          • Accedi

                          • Non hai un account? Registrati

                          • Accedi o registrati per effettuare la ricerca.
                          Powered by NodeBB Contributors
                          • Primo post
                            Ultimo post
                          0
                          • Categorie
                          • Recenti
                          • Tag
                          • Popolare
                          • Utenti
                          • Gruppi