Secret Project on the Voodoo5 6000
-
Hello,
First Peltier Project:
Materials are arrived.
- Copper
- Delrin
- Tec's plastic
- Power Supply
TEC is dangerous because the water droplets can damage my card. He will take steps to prevent this from happening with the TEC block, but if I am careful I can get a glimpse into what my card is capable of.
4 Peltiers on the front allows for 320W of cooling, and 2 peltiers on the back allows for 160W of cooling for the entire rear of the card.
The single 600W power supply will keep them all operating perfectly.
Second Peltier Project:
Informations about Peltier elements:
QC-127-1.4-3.7MS
Peltierelement 36W for GPUs
40x40x4,7mm
30,12€/pieces
120,48€ (4 pieces)
QC-127-1.0-3.9M
Peltierelement 18W for Sdrams
30x30x3,6mm
26,92€/pieces
179,52€ (6 pieces)
8 Tecs are here:
The others tecs will arrived 2 weeks later.
Powersupply is ordered:
Trafo Netzteil Transformator 12V / 40A DIN ISO9001 | eBay
350W Coolingpower is very high. Maybe, we can freeze the card for best o/c results.
-
Well done trevor , follow you
-
The second project:
Done with the "normal functional design" but we will take tho old design. I like this
1mm Coldbplate on RAM.
To the front, we will take thermalgrease.
To the back, we will use thermalpads too.
4 tecs on GPU and 6 tecs on ram.
Idea:
We take a screw to push the pcb on the front cooler. Better is thermalglue, or we take a screw an a backplate. We have better temperatures.
We must defeated a plasticplate under the screw.
Acrylglastops must be changed in other material. We will use POM (black or white).
Acrylglas can broken because the temperatures differences.
Informations about isolation.
We need dough first to conserve the card. At first, the card must be protect with dough. But the dough will be cold too, to the tecs. There, we must isolate the dough too, with Armaflex. Armaflex is one of the best insolator. I think its a safe way.
Furthermore we can regulate the tecs with an controlpanel. With the controlpanel we can regulate the coolingpower.
May be from 400W - 100W.
-
it's a top
-
Hello,
Come back
The front copperbaseplate is done:
New structur. 1mm to 0.3mm for cooler tecs. 4 hours of investement for this struktur. In the backcooler, same structur.
An electronics engineer draws up the control panel:
All provisionally done.
Here is the beauty:
In progress now...
Regards,
Trevormacro
-
Amazing Trevor, i follow next steps
-
Waiting for the cover!
-
Hi,
Some tests for the green color.
nb. the painter will paint again because the quality is bad.
What do you think?
-
trevor is great
-
The green color is good now.
Soon the next step...
-
Preparing the card with plastik 70:
Preparing waterblocks:
Preparing the tec's:
-
amzing work trevor
keep on -
wow :clapclap:
i'm locked to this thread
-
any news trevor
-
Hello,The Control Panel:
Let's start...
Let's see if condensation occurs...
Next step for the next time... -
Amazing work
-
great card and beautiful work:D
-
Wooow !
-
First TEST with same system of my watercooling cards.
3DMark01se and Quake3 Freeze @166MHz in the first 5s.
The Watertemp 50°C is to high. (measured with IR lasergun)
The Tecs can be cool -22°C without heat. Better is 30°C watetertemp. But I need more radiatorsurfaces. 360mm radiotor is not enough big to cool well the water.
I have a thermalpower about 480W (400W for the tec cooler and 80 max in charge for the V5k6).
The 360mm Radiator is recommend about 200-300W for good watertemperatures. Better is, I get one more radiotor or much better 2 more. Or with a chiller I would have any better watertemperatures. May be below 20°C.
I let you know.
I have baught this waterchiller.
Aquatuning recommend this one.
I hope I will receive it in good condition with DHL.
Anyone have experiences with waterchiller?
History:
On the frontside:
4 tec of 36W for gpus and 3 tec of 18W for sdrams.
144 + 54 = 198Watts
http://img15.hostingpics.net/pics/20780084y3.jpg
http://img15.hostingpics.net/pics/49351671y4.jpg
On the rearside:
3 tec of 18W.
=54Watts
http://img15.hostingpics.net/pics/20350942y6.jpg
http://img15.hostingpics.net/pics/17825149y7.jpg
In all = 252Watts TEC on the card + 100Watts max for the V5k6 = 352Watts
The waterchiller is for 790Watts with max low temperature of 4° C.
Is it good?
One VSA100 produce 14Watts in full charge. is the tec (36W) on gpu are good for it?
-
nice performance trevor
Ciao! Sembra che tu sia interessato a questa conversazione, ma non hai ancora un account.
Stanco di dover scorrere gli stessi post a ogni visita? Quando registri un account, tornerai sempre esattamente dove eri rimasto e potrai scegliere di essere avvisato delle nuove risposte (tramite email o notifica push). Potrai anche salvare segnalibri e votare i post per mostrare il tuo apprezzamento agli altri membri della comunità.
Con il tuo contributo, questo post potrebbe essere ancora migliore 💗
Registrati Accedi