[Thread Ufficiale] Gigabyte G1-Killer Serie

[tom1]

Video

[ame=http://www.youtube.com/watch?v=Bobq9L7YfoU]YouTube - CES 2011: Gigabyte Killer G1[/ame]

[tom1]

GIGABYTE G1 Killer Assassin

 

:D:D:D:D

 

Nuda e Cruda

 

 

Foto particolare dei condensatori

 

 

Unboxing

 

 

La Mobo

 

 

 

Profilo Posteriore

 

 

 

Socket

 

 

 

RAM

 

 

PCI EXPRESS

 

 

Porte SATA e Controller

 

 

Chip di Gestione

 

 

 

 

 

 

 

 

 

 

LAN

 

 

 

 

 

 

 

 

[tom1]

Specifiche Tecniche G1 Assassin

 

 

 

CPU

1. Support for an Intel Core i7 series processor in the LGA1366 package ( Go to GIGABYTE's website for the latest CPU support list.)
   
2. L3 cache varies with CPU
   

QPI

1. 4.8GT/s, 6.4GT/s
   

Chipset

1. North Bridge: Intel X58 Express Chipset
   
2. South Bridge: Intel ICH10R
   

Memory

1. 6 x 1.5V DDR3 DIMM sockets supporting up to 24 GB of system memory
   * Due to Windows 32-bit operating system limitation, when more than 4 GB of physical memory is installed, the actual memory size displayed will be less than 4 GB.
   
2. 3/Dual channel memory architecture
   
3. Support for DDR3 2200/1333/1066/800 MHz memory modules
   
4. Support for non-ECC memory modules
   
5. Support for Extreme Memory Profile (XMP) memory modules
   

(Go to GIGABYTE's website for the latest supported memory speeds and memory modules.) Audio

1. 1 x Creative CA20K2 chip
   
2. High Definition Audio
   
3. 2/4/5.1/7.1-channel
   
4. Support for Dolby Digital Live/DTS Neo:PC/DTS Interactive
   
5. Support for S/PDIF Out
   

LAN

1. 1 x Bigfoot Killer E2100 chip (10/100/1000 Mbit)
   
2. 1 x Marvell 88E1118R phy
   

Expansion Slots

1. 2 x PCI Express x16 slots, running at x16 (PCIEX16_1, PCIEX16_2)
   * For optimum performance, if only one PCI Express graphics card is to be installed, be sure to install it in the PCIEX16_1 slot; if you are installing two PCI Express graphics cards, it is recommended that you install them in the PCIEX16_1 and PCIEX16_2 slots.
   
2. 2 x PCI Express x16 slots, running at x8 (PCIEX8_1, PCIEX8_2)
   * The PCIEX8_1 slot shares bandwidth with the PCIEX16_1 slot and the PCIEX8_2 slot with PCIEX16_2. The PCIEX16_1/PCIEX16_2 slot will operate at up to x8 mode when the PCIEX8_1/PCIEX8_2 is populated.
   (The PCIEX16_1, PCIEX16_2, PCIEX8_1, and PCIEX8_2 slots conform to PCI Express 2.0 standard.)
   
3. 2 x PCI Express x1 slots
   
4. 1 x PCI slot
   

Multi-Graphics Technology

1. Support for 3-Way/2-Way NVIDIA SLI technology and 4-Way/3-Way/2-Way ATI CrossFireX technology
   

Storage InterfaceSouth Bridge:

1. 6 x SATA 3Gb/s connectors (SATA2_0~SATA2_5) supporting up to 6 SATA 3Gb/s devices
   
2. Support for SATA RAID 0, RAID 1, RAID 5, and RAID 10
   

Marvell 88SE9182:

1. 2 x SATA 6Gb/s connectors (GSATA3_6, GSATA3_7) supporting up to 2 SATA 6Gb/s devices
   
2. Support for SATA RAID 0 and RAID 1
   

USBSouth Bridge:

1. Up to 8 USB 2.0/1.1 ports (4 on the back panel, 4 via the USB brackets connected to the internal USB headers)
   

1 x Renesas D720200 chip and 2 x VLI VL810 hubs:

1. Up to 8 USB 3.0/2.0 ports (4 on the back panel, 4 via the USB brackets connected to the internal USB headers)
   * The USB 2.0 signals of the USB 3.0/2.0 ports are from the South Bridge.
   

Internal I/O Connectors

1. 1 x 24-pin ATX main power connector
   
2. 2 x 8-pin ATX 12V power connectors
   
3. 2 x 4-pin PCIe 12V power connectors
   
4. 2 x SATA 6Gb/s connectors
   
5. 6 x SATA 3Gb/s connectors
   
6. 1 x CPU fan header
   
7. 1 x system fan header
   
8. 3 x fan headers
   
9. 1 x front panel header
   
10. 1 x front panel audio header
    
11. 1 x S/PDIF Out header
    
12. 2 x USB 2.0/1.1 headers
    
13. 2 x USB 3.0/2.0 headers
    
14. 1 x clearing CMOS jumper
    
15. 1 x Quick Boost button header
    
16. 1 x heatsink LED power connector
    

Back Panel Connectors

1. 1 x PS/2 keyboard port
   
2. 1 x PS/2 mouse port
   
3. 1 x optical S/PDIF Out connector
   
4. 1 x coaxial S/PDIF Out connector
   
5. 4 x USB 2.0/1.1 ports
   
6. 4 x USB 3.0/2.0 ports
   
7. 1 x RJ-45 port
   
8. 5 x audio jacks (Center/Subwoofer Speaker Out, Rear Speaker Out, Side Speaker Out, Line In/Mic In, Line Out)
   

I/O Controller

1. iTE IT8720 chip
   

H/W Monitoring

1. System voltage detection
   
2. CPU/System temperature detection
   
3. CPU/System fan speed detection
   
4. CPU overheating warning
   
5. CPU/System fan fail warning
   
6. CPU/System fan speed control
   * Whether the CPU/system fan speed control function is supported will depend on the CPU/system cooler you install.
   

BIOS

1. 2 x 16 Mbit flash
   
2. Use of licensed AWARD BIOS
   
3. Support for DualBIOS
   
4. PnP 1.0a, DMI 2.0, SM BIOS 2.4, ACPI 1.0b
   

Unique Features

1. Support for @BIOS
   
2. Support for Q-Flash
   
3. Support for Xpress BIOS Rescue
   
4. Support for Download Center
   
5. Support for Xpress Install
   
6. Support for Xpress Recovery2
   
7. Support for EasyTune
   * Available functions in EasyTune may differ by motherboard model.
   
8. Support for Dynamic Energy Saver 2
   
9. Support for Smart 6
   
10. Support for Auto Green
    
11. Support for eXtreme Hard Drive (X.H.D)
    
12. Support for ON/OFF Charge
    
13. Support for Cloud OC
    
14. Support for Q-Share
    

Bundle Software

1. Norton Internet Security (OEM version)
   

Operating System

1. Support for Microsoft Windows 7/Vista/XP
   

Form Factor

1. XL-ATX Form Factor; 34.5cm x 26.3cm
   

Remark

• Due to different Linux support condition provided by chipset vendors, please download Linux driver from chipset vendors' website or 3rd party website.
  
• Most hardware/software vendors no longer offer support for Win9X/ME/2000/XP SP1/SP2. If drivers are available from the vendors, we will update them on the GIGABYTE website.
  

BIOS

F1

http://download.gigabyte.eu/FileList/BIOS/mb_bios_g1.assassin_f1.exe

F2

http://download.gigabyte.eu/FileList/BIOS/mb_bios_g1.assassin_f2.exe

Lista Case Supportati

http://download.gigabyte.eu/FileList/Chassis/Chassis-Support-List.pdf

Driver

GIGABYTE - Motherboard - Socket 1366 - G1.Assassin (rev. 1.0)

[tom1]

Riservato 9

[tom1]

Riservato 10

[tom1]

Riservato 11

[tom1]

Riservato 12

[tom1]

Riservato 13

[tom1]

Riservato 14

[tom1]

Riservato 15

[Le085]

Belle queste schede! peccato siano arrivate cosi' tardi.. speriamo le introducano anche per le nuove piattaforme sandy bridge!

[tom1]

Sicuramente , a breve ci saranno ottimi aggiornamenti

[tom1]

Nuove Foto per il Modello G1 Assassin

[Devil_Mcry]

belle davvero

spero faranno qualcosa per 2011 o 1155

[tom1]

Dubito Ivan, già sta uscendo troppo tardi questa serie di Gigabyte

[tom1]

Specifiche - Bios - G1 assasin aggiunti

[DLz]

Salve a tutti! Sto per acquistare una gigabyte g1 sniper lga 1366, ho alcuni dubbi: io attualmente posseggo una x58a-ud3r rev.2.0 con 12 fasi, e 920D0 @4.00GHz, pensate che le 8 fasi della sniper, siano sufficienti? So che la qualità costruttiva è più importante e so che è buona, ma la mia domanda è: anche se sono fatte bene, queste 8 fasi, sono sufficienti? Consedarando che passerò a liquido, e quindi salirò un altro po', andranno ancora bene? Grazie!

[Le085]

si si non dovresti aver problemi

[DLz]

Ok, grazie per la risposta!

[tom1]

bella scheda che prenderai