Trovare le valide sostitute delle cellshock pc2-8000 che ho ora...mi aiutate?

[Rankine]

toto, io vedo solo il refresh cycle time, che indica 42

[Totocellux]

nel riquadro Timings, in alto sotto Precharge Delay non c'è nient'altro?

Hai la v3.5 di MemSet?

[Rankine]

eh si, ho la 3.5 devo scaricare la nuova versione allora!

[Totocellux]

ho anch'io la v3.5: clicca sul pulsante spd in alto, dovrebbe spuntare il parametro Refresh Rate, poi clicca sull'ultimo profilo Jedec, in alto

[Rankine]

quando clicco su spd mi compare la scritta "floating point division by zero" a cosa è dovuto?

[Totocellux]

è un errore verosimilmente dovuto ad una errata operazione in memoria: a un certo punto del programma c'è una istruzione che prevede una divisione numerica, dove il divisore è rappresentato dal numero zero. Il programma a questo punto si pianta, perchè una divisione del genere è impossibile da definire con una grandezza.

[Rankine]

ma questo errore compare anche a te? perchè a me lo fa ogni volta...

[Totocellux]

... no, e non dovrebbe comparire neanche a te.

[bear85roma]

problemi di ram secondo te toto???? prova ad usare memtest ti scarichi la iso la metti dentro un cd, dal boot dai priorità al lettore dvd ed il programma in automatico ti testa le ram dal bios.....

togli tutti i settaggi dell'oc...e vedi se hai problemi di ram

[Rankine]

ok ragazzi, proverò domattina, ora non posso perchè tra poco devo uscire... cmq se non fosse stato per memset non mi sarei accorto di nulla....

[bear85roma]

vai tranquillo e facci sapere qualcosa....

[Le085]

cmq quel kit 4gb di a-data monta i chip micron?

[bear85roma]

si leo monta i chip micron!!!!!

[Le085]

bear85roma ha scritto:

si leo monta i chip micron!!!!!

ottime !

rare come la nebbia:asd:

a pg abbiamo un kit 2x1gb di adata vitesta extreme edition 1200 mhz...

con 2,4 V bootano a 1300mhz:D

purtroppo la p5k premium si ferma a 2,55...sarà il caso di vmoddarla per vedere fin dove arrivano:asd:

[bear85roma]

ammazzo oh....che ram!!!!! infatti sono diventate rare da trovare...ci stò facendo un pensierino pure io.......però se rankine mi dà il suo kit da 2gb di cellshock......arriverei a 4gb di cellshock ddr2 v2 1000....che ne dici????

[bear85roma]

ragazzi anche io devo trovare delle sostitute per le mie cellshock....avevo pensato a varie soluzioni, aspetto vostri consigli!!!!

 

A-DATA

 

A-DATA

Kit 2 x 2 GB (2 Banchi) 128MX8

2 x 2GB DDR2 Memory

ATTENZIONE QUESTE SONO LE :

EXTREME EDITION 1066 +

VITESTA

240Pin DIMM

Unbuffer

Non-ECC Memory

ADATTE PER IL DUAL CHANEL

TOTALE 4GB DI BANCHI DI RAM DDR2 1066+ MhZ

Designed to fulfill the speed and performance requirements of extreme gamers and computer enthusiasts, A-DATA's DDR2 1066+ module is an innovative addition to the Extreme Edition line up. Featuring higher bandwidth, lower latency, and lower power consumption, the DDR2 1066+ is the smartest choice for high-end platforms based on the revolutionary Intel Core 2 Duo/Extreme/Quad series or AMD Athlon 64 series processors.

 

Effortlessly achieving speeds up to 8.5 GB/s, the DDR2 1066+ supplies 32% more bandwidth than DDR2 800 (6.4 GB/s). With unmatched speed and dual-channel configuration support, the DDR2 1066+ efficiently synchronizes with FSB (Front Side Bus) or HT (Hyper Transport) transfer rates for great overclocking capability and the fastest response time. A-DATA's DDR2 1066+ modules use top quality 128M x 8 FBGA (Fine-Pitch Ball Grid Array) chips, with a highest capacity reaching 2GB in size for faster graphics rendering, 3D gaming, and performance computing.

 

All DDR2 1066+ modules pass A-DATA's strict burn-in and dual-channel tests for the most stable and reliable memory. With A-DATA’s extensive expertise in memory module manufacturing, the DDR2 1066+ is guaranteed to satisfy the needs of the most demanding gamers and enthusiasts.

Caratteristiche tecniche per singolo banco

BANCO DA 2GB

Suitable for: Desktop PC

240 Pin Unbuffered-DIMM non-ECC

Configuration: 128Mx8

Bandwidth: 8.5GB/Sec (PC2 8500)

Timings: 5-5-5-15-2T

Voltage: 2.2V~2.3V

Supports nVIDIA EPP Technology

Suggested Platform: Intel 975X?P965(*); AMD AM2 (nForce 590 SLI)

Warranty: Lifetime Warranty

* For Asus P5B Series mobos, BIOS Settings "Write to Precharge Delay" should be set to 12+.

[bear85roma]

OCZ DDR2-1066 Reaper HPC Edition Dual Channel Kit (2x2048)

Descrizione prodotto4GB memory upgrade kit for upgrading gaming systems and other memory-hungry systems. Equipped with OCZs unique Reaper heatspreaders for best possible heat dissipation.

 

The latest PC titles that make use of DirectX 10 crave more than the standard 2GB of RAM for the ultimate gameplay experience and the highest settings. Computer enthusiasts and professionals utilizing high-bandwidth video, music, and graphics applications will also benefit from the ultimate balance of speed and density the new PC2-8500 4GB Reaper HPC offers.

 

To ensure superior stability and performance over the entire life of the memory the Reaper HPC Series makes use of an innovative cooling solution to more effectively dissipate heat produced by high-speed memory. The thermo-conductive copper heat pipe conduit is ideal for overclocking where every degree matters.

 

The new modules also offer instant overclocking right out of the box with EPP (Enhanced Performance Profiles) programmed into the SPD. PC2-8500 Reaper modules will immediately boot at the rated specs on the latest generation of NVIDIA SLI chipsets. EPP eliminates the need for manual configuration and makes the benefits of overclocking available to the complete range of consumers looking to get the most out of their systems.

 

The PC2-8500 Reaper HPC Series will be available in 4GB (2x2048MB) Dual Channel Kits. Although the OCZ Reaper HPC series can meet all enthusiast demands, this high-capacity, high performance memory can become a user-friendly household item for the complete range of consumers looking to maximize system performance with additional RAM.

 

As part of OCZ's line-up of premium memory, Reaper HPC PC2-8500 modules are backed by a Lifetime Warranty and industry-leading technical support so you can push your high-performance memory to its limit.

 

Di norma questo articolo non è presente a magazzino ma disponibile in circa 3/4gg lavorativi.

Caratteristiche prodotto

Codice4976

ProduttoreOCZ Technology

ModelloOCZ2RPR10664GK

Capacity4Gb

StandardPC8500 (DDR2-1066)

ModuleDual Channel kit (2x 2Gb)

Memory Speed1066MHz

Cas LatencyCL5

Memory Timings5-5-5-18

Voltage2.1V (EVP up to 2.15V)

Error CheckingNon-ECC

Features6-layer PCB, EPP Ready, Reaper HPC Heatsinks

RegisteredUnbuffered

Tecnology240-pin DDR2 SDRAM

ConfigurationDouble-sided 2GB DDR2 modules

PackingRetail packaging

[bear85roma]

TRANSCEND DDR2-1066 aXeRam Series Dual Channel Kit (2x2048)

Descrizione prodottoWe are pleased to recommend the aXeRam Series of overclocking memory from Transcend.

While Transcend are not known for manufacturing high-performance memory for gaming and overclocking, these aXeRam memory upgrade modules really do stand the test - they are an excellent choice for gamers and overclockers alike.

As with all aXeRam kits, this PC2-8500 memory kit is equipped with aluminium heatspreaders.

 

The TX1066QLU-4GK consists of 2pcs 2GB DDR2 SDRAM module. The 2GB module is a 256M x 64bits DDR2-1066 Un-buffered DIMM.

The 2GB module consists of 16 pcs 128Mx8bits DDR2 SDRAMs in 60 ball FBGA packages and a 2048 bits serial EEPROM on a 240-pin printed circuit board.

The 2GB module is a Dual In-Line Memory Module and is intended for mounting into 240-pin edge connector sockets.

 

Di norma questo articolo non è presente a magazzino ma disponibile in circa 3/4gg lavorativi.Caratteristiche prodottoCodice4919ProduttoreTranscendModelloTX1066QLU-4GKCapacity4GbStandardPC8500 (DDR2-1066)ModuleDual Channel kit (2x 2Gb)Memory Speed1066MHzCas LatencyCL5Memory Timings5-5-5-15Voltage2.0V recommended voltageError CheckingNon-ECCFeatures6-layer PCB, aluminium heatspreaders, EPP ReadyRegisteredUnbufferedTecnology240-pin DDR2 SDRAMConfigurationDouble-sided 2GB DDR2 memory modulesPackingRetail packaging

[bear85roma]

Team Group DDR2-1066 Xtreem Dark Dual Channel Kit (2x2048)

Descrizione prodottoThe new TEAM Xtreem Dark series PC2-8500 was developed with entry level overclockers and gamers in mind. If you are new to Overclocking or would like to cross over into the Overclocking world, The Team Xtreem Dark series is definitely your answer.

 

The latest Microsoft operating system Windows Vista will be available for end users next year, and it will require large capacity, lightning fast and stable memory to ensure you get the most of performance from Windows Vista.

Team Xtreem Dark series modules are well prepared and geared toward adapting this new operating system, thus Team Xtreem Dark is undergone compatibility and stability testing against Microsoft Windows Vista to ensure you get the most out of this latest operating system.

 

The latest PC games require large capacity, lightning fast memory to deliver the most powerful performance. The Xtreem Dark Series PC2-8500 is the ultimate memory solution for graphic-intensive PC titles and provides 800MHz clock speeds, unsurpassed reliability and performance to unleash every graphic possibility, Making sure every frame per second counts and avoid lagging that could frustrate your gaming experience. With higher data burst transfer rate, the faster reaction you get. This 240-Pin DDR2 SDRAM system memory facilitates lightning-fast data transfers, optimum resource management and smooth multi-tasking.

 

Using the same high quality heat spreader as Team Xtreem series, it can ensure that every heat from the chips will go through our specially design and unique heat solvent which will be transferred to our high thermal vaporizer heat spreader making sure every pieces of IC gets equal cooing effect. Team Xtreem Dark series memory can also withstand high heat caused from the extended voltage up to 2.6V when you need to adjust the voltage in order the get the performance you wanted. This memory is a great upgrade for your lethal gaming system or 3D rendering needs.

 

Di norma questo articolo non è presente a magazzino ma disponibile in circa 3/4gg lavorativi.Caratteristiche prodottoCodice4931ProduttoreTeamGroupModelloTXDD4096M1066HC5DCapacity4GbStandardPC8500 (DDR2-1066)ModuleDual Channel kit (2x 2Gb)Memory Speed1066MHzCas LatencyCL5Memory Timings5-5-5-15Voltage2.2V-2.35VError CheckingNon-ECCFeatures8-layer PCB, blue alu heatspreadersRegisteredUnbufferedTecnology240-pin DDR2 SDRAMConfiguration64Mx8 DDR2 2Gb modules, double-sidedPackingRetail packaging

[bear85roma]

ragazzi la scelta è andata sulle team group......

grazie ancora a toto per il consiglio!!!!!