IN DEPTH OF FOXCONN BLACKOPS–the x48 motherboard dedicated to gamers

windwithme

After a couple of years of entering branded Motherboard market,

FOXCONN has started a gaming product line Quantum Force from the P35 chipset based MARS featuring overclocking, performance and gaming in 2007.

Lately we see another Quantum Force “BlackOps”, a X48 chipset based motherboard,

launched. BlackOps is a bit behind on schedule comparing to other manufacturers’ X48 motherboards, but we’ll find out if it’s worth waiting now.

The package is as huge as 45 x 13 x 29 cm with rich accessories. No surprisingly, the package design is targeted at gamers.

Here’s the manual, quick guide, I/O panel, FOXCONN “Quantum Force” shield sticker and the IDE cable.

SATA cables, USB rear bracket, and screws

7.1 channel audio capability SONAR Audio card based on Realtek ALC885 chipset

And an additional 12cm fan for Chassis to releasing system temperature

Here’s FOXCONN BLOCKOPS

In this part of the board

A total of 3 PCIe x16 slots support ATI CrossFireX technology. When all of them are running, it operates at x16+x16+x4.

3 PCI slots.

It uses Broadcom 5786/5788 Gigabit LAN chipset.

In this part of the board

6 SATAII provided by ICH9R southbridge and support RAID 0, 1, 5, 10

LEDs to show system message and the Power/Reset/Clear CMOS button

Dual BIOS design, and an the blue jumper can reset the board easily

In this part of the board there are connectors include:

24 pin power supply connector

1 IDE connector

1 Floppy connector

4 DDR3 DIMMs support 800/1066/1333/1600 MHz

In this part of the board

It supports 45/65nm Quad/Duo processors

8 phase PWM design

windwithme

After a couple of years of entering branded Motherboard market,

FOXCONN has started a gaming product line Quantum Force from the P35 chipset based MARS featuring overclocking, performance and gaming in 2007.

Lately we see another Quantum Force “BlackOps”, a X48 chipset based motherboard,

launched. BlackOps is a bit behind on schedule comparing to other manufacturers’ X48 motherboards, but we’ll find out if it’s worth waiting now.

The package is as huge as 45 x 13 x 29 cm with rich accessories. No surprisingly, the package design is targeted at gamers.

Here’s the manual, quick guide, I/O panel, FOXCONN “Quantum Force” shield sticker and the IDE cable.

SATA cables, USB rear bracket, and screws

7.1 channel audio capability SONAR Audio card based on Realtek ALC885 chipset

And an additional 12cm fan for Chassis to releasing system temperature

Here’s FOXCONN BLOCKOPS

In this part of the board

A total of 3 PCIe x16 slots support ATI CrossFireX technology. When all of them are running, it operates at x16+x16+x4.

3 PCI slots.

It uses Broadcom 5786/5788 Gigabit LAN chipset.

In this part of the board

6 SATAII provided by ICH9R southbridge and support RAID 0, 1, 5, 10

LEDs to show system message and the Power/Reset/Clear CMOS button

Dual BIOS design, and an the blue jumper can reset the board easily

In this part of the board there are connectors include:

24 pin power supply connector

1 IDE connector

1 Floppy connector

4 DDR3 DIMMs support 800/1066/1333/1600 MHz

In this part of the board

It supports 45/65nm Quad/Duo processors

8 phase PWM design

windwithme

Rear I/O

2 eSATA ports provided by JMB363

6 USB 2.0 ports

2 Gigabit LAN ports

BLACKOPS 4 in 1 Quantum Cooler

1. Water Cooling

2. the usual passive air cooling

3. Active air cooling with the additional fan in the accessories

4. Extreme cooling with dry ice or LN2

And an additional testing tray gives a better thermal solution

Here’s the boot-up screen as shown on the package

FOXCONN also offers an application to change the boot-up screen on your own

BIOS post screen

Quantum BIOS overlocking setup screen

DDR3 ratio

When the CPU clock and memory speed at 1:4 ratio, there are 4 optimized pre-set ratio.

On the right side, there’s also the setting suggestion.

windwithme

CPU Feature

Detail DRAM Configuration

A lot of options are available to fine-tune all kinds of DDR3

Voltage post screen

Voltage configuration is one of the strength of FOXCONN BLACKOPS. It offers wide rage of voltage control with many tweaking options.

CPU Voltage Multiplier x1.000~1.525

CPU Voltage Setting 0.8250~1.60000V

CPU PLL Voltage Setting 1.395696~2.446852V

CPU VTT Voltage Setting 1.200~1.725V

NB Voltage Setting 1.156V~2.395V

OC Gear offers 7 setting savings

PC Health Status

It monitors both voltage and speed.

PC Health Status

Quantum BIOS offers so many options for tweaking, it’s hardly to find anything missing or not detail enough.

This picture shows the settings of quad-core CPU overclocking.

Boot-up screen can be changed to your own in the application provided.

But it only supports 256 colors.

Testing Platform

CPU: INTEL Core 2 Duo E8500/Quad QX9650

MB: FOXCONN BLACKOPS

DRAM: CORSAIR Dominator TWIN3X2048-1800C7DIN

VGA: GAINWARD BLISS 9800GTX 512MB

HD: WD6400AAKS

POWER: Corsair HX620W Modular Power Supply

Cooler: Thermaltake BigTyp VP

windwithme

Image of the application install page

The overclocking utility, AEGIS panel, comes with BLACKOPS (X48) have been upgraded to a newer & stronger version than what we saw in Mars (P35).

FSB or voltage can be tuned in AEGIS panel

Also monitoring voltage and temperature

More functions

FOX LiveUpdate BIOS update utility.

Intel Core 2 Duo processor, E8600, runs stable at 556MHz SP2004

Comparing to other X48 based motherboards, BlackOps out-performs at running over 550Mhz FSB and stay stable.

We also saw a lot of people working BlackOps to 570~590MHz at CPUZ.

Intel Core 2 Extreme processor, QX9650, runs stable at 460Mhz Super PI 32M

The performance at quad core is above average comparing to P35.

FOXCONN BLACKOPS uses a different voltage design which cause a lower voltage value in CPUZ.

FOXCONN’s own utility shows the correct CPU voltage for reference. Hopefully we will see a future version to fix the CPUZ issue.

Overclocking at DDR3

2 DDR3 1800 CL7 7-7-20 1.99V

System runs stable with dual SP2004 2GB loaded

Memory bandwidth testing

It runs stable at DDR3 1800 CL7. Unfortunately the BIOS we have can’t push it to DDR3 2000. Hopefully we’ll see it soon with a newer BIOS.

windwithme

Running at 9800GTX

CPU 460.5X9=>3914Mhz

DARM DDR3 1842 CL7 7-7-20 1T

VGA 675/2200

3DMARK2003

3DMARK2005

3DMARK2006

Conclusion

Advantages:

1. Supreme spec and various overclocking accessories.

2. Supports PCI-E 2.0, CorssFireX, X16+X16+X4

3. 8-Phase digital PWM, eSATA, onboard power button and debug LEDs

4. Rich overclocking options in BIOS and a wide voltage range

5. Outstanding extreme overclocking performance running on Core2Duo FSB

Disadvantages:

1. Most X48 based motherboards are priced high at between 310 to 370USD. BLACKOPS sells at 350 USD, a price still higher than other highend motherboards even with its abundant accessories.

2. The availability of BLACKOPS is relatively lower than other MB makers.

3. The DDR3 overclockability can be improved.

Performance ??????????

Materials ??????????

Board layout ??????????

Cost-performance ??????????

BlackOps is the first motherboard we see with most complete accessories for overclockers. It is evident to tell FOXCONN’s ambition and effort in building a gaming brand.

In the gaming test, we found X38 and X48 have better capability on their X16+X16 Crossfire support than X8+X8 on P35 and P45. This gives X48 more advantage on running high-demanding games.

FOXCONN Blackops really sets a new bar on motherboard design and innovation, including the performance, overvall board design and a complete and luxury accessories.

These inevitably make Blackops’ pricing higher than others, since X48 based motherboards are set at extreme highend segment.

If Foxconn could cut down some of the accessories, and lower the retail price, they can satisfy a lot more users with tighter budget.

c1rcu1tburn3r

Good work wind!