Ciao Mondo 3!

amd_logoTechpower pubblica un interessante articolo in cui mostra la semplicità e l'elevatissima percentuale di riuscita di una procedura che consente di moddare le schede video AMD HD6950 in HD6970 attraverso la riabilitazione degli stream processors.

Da alcuni giorni Techpowerup ha pubblicato un interessante articolo che descrive una procedura che consente di riabilitare gli stream processors disabilitati via software nella scheda video AMD HD6950 trasformandola, a meno delle frequenze di GPU e ram,  in una HD6970.
Ricordiamo brevemente che le due schede differiscono appunto per il numero di stream processors (1536 per la HD6970 e 1408 per la HD6950) con architettura VLIW4 disponibili, le frequenze implementate (HD6970: 880 MHz GPU - 1375x4 MHz GDDR5; HD6950: 800 MHz GPU - 1250x4 MHz GDDR5) ed i connettori di alimentazione saldati sul PCB, 2x6 pin per HD6950, mentre 1x6 e 1x8 pin per HD6970.
La procedura consiste in un "semplice" flash di un BIOS delle schede HD6970 sulla ROM della HD6950; a garantire la sicurezza della operazione, lo switch implementato per la prima volta da AMD sulla serie D69x0 che consente di ripristinare il BIOS originale (spostanto la posizione dell'interruttore) in caso di flash non andato a buon fine.

biosswitch

Di seguito la procedura proposta da Techpowerup:
  1. Grab ATI Winflash from here (32 & 64-bit).
  2. Download HD 6970 BIOS. The Sapphire one I linked to will work on all reference design cards from any vendor.
  3. Make sure the BIOS switch on the card is set to the 1 position (pictured further down if you don't know where it is).
  4. Run ATI Winflash, click Save to save your BIOS, so you have a backup in case something goes wrong.
  5. Load the HD 6970 BIOS into Winflash by clicking Load Image, followed by Program.
  6. Let the flashing process complete and reboot your system.
  7. Check the shader count using GPU-Z, it should show 1536. Make sure you use version 0.5.0 or newer, the official 0.4.9 version does not support HD 6900 Series properly. If you see a shader count of 1600, your GPU-Z version is outdated.
  8. To ensure maximized performance open Catalyst Control Center, go to the Overdrive tab and set the PowerTune slider to the +20% setting. The "Testing" section of this article has more data on that.
  9. Check stability in Windows desktop applications and games.
If you get an error like ID mismatch or Could not erase ROM, then you'll have to do some extra work in a Windows command prompt (or DOS): Run atiwinflash -unlockrom 0 followed by atiwinflash -f -p 0 bios.bin where bios.bin is the path and filename of the HD 6970 BIOS you downloaded.

 HD6950_before HD6950_after

Attualmente i risultati sono stati ottimi con percentuali di riuscita prossime al 100% su modelli Sapphire, HIS, Asus, PowerColor e XFX. I casi in cui sono state evidenziate problematiche di rendering a valle del flash sono da ricondurre all'aumento di frequenze che potrebbe non essere tollerato dalla GPU o dalle memorie.

hd6950mod_perf

Xh Staff

Pubblicità