Jump to content

un aiuto cortesemente !!!!!!!!!


ginopoppi3

Recommended Posts

uhm non è bella come cosa...in questi casi la prima cosa da fare è provare un clear cmos...se non hai idea di come farlo stacca la spina del pc apri il case e togli la batteria dalla scheda madre per una ventina di secondi.

Non vorrei però che per qualche motivo si sia corrotto il sistema operativo...vabbeh intanto fai questa prova :)

Link to comment
Share on other sites

grazie amici! ma non c'era altro che il format. vorrei portare la cpu a 3.4,

questo è quello che ho ora mi potreste dare una mano? ora sono a 3.2 questi sono i settaggi che ho ora:

 

queste sono le impostazioni attuali:

 

ai overclock (manual)

cpu ratio setting 8

fsb frequency 400

pcie frequency (100)

fsb strap to north bridge (auto)

dram frequency 800

dram timing control manual

1st information :4-4-4-12-auto-auto-auto-auto

2nd information :tutto auto

3rg information :tutto auto

dram static read control (auto)

dram read training (auto)

mem. oc charger (auto)

ai clock twister (auto)

ai transaction booster (auto)

c/p :a1 a2 |b1 b2

lvl : 06 06

********please key in numbers directly!****************

 

cpu voltage 1.4

cpu pll voltage 1.6

fsb termination voltage auto

dram voltage 1.9

nb voltage 1.32

sb voltage 1.2

pcie sata voltage 1.5

*********************************

load-line cal ibration (auto)

cpu spread spectrun disable

pcie spead spectrun disable

*********************************

Link to comment
Share on other sites

io ho portato il q6600 a 3,4 GHz (anche se non molto stabile per via delle ram che rognavano non poco).

 

Avevo impostato 377MHz con moltiplicatore a 9, ma ho dovuto lavorare con le memorie parecchio rilassate.... divisore fsb:ddr 1.1 , timings 6-5-5-18 e dram voltage 2,05V

 

Ora con la mobo nuova e le ram nuove che mi arriveranno voglio passare i 400 x 9 sennò mi girano!

Link to comment
Share on other sites

grazie amici! ma non c'era altro che il format. vorrei portare la cpu a 3.4,

questo è quello che ho ora mi potreste dare una mano? ora sono a 3.2 questi sono i settaggi che ho ora:

 

queste sono le impostazioni attuali:

 

ai overclock (manual)

cpu ratio setting 8

fsb frequency 400

pcie frequency (100)

fsb strap to north bridge (auto)

dram frequency 800

dram timing control manual

1st information :4-4-4-12-auto-auto-auto-auto

2nd information :tutto auto

3rg information :tutto auto

dram static read control (auto)

dram read training (auto)

mem. oc charger (auto)

ai clock twister (auto)

ai transaction booster (auto)

c/p :a1 a2 |b1 b2

lvl : 06 06

********please key in numbers directly!****************

 

cpu voltage 1.4

cpu pll voltage 1.6

fsb termination voltage auto

dram voltage 1.9

nb voltage 1.32

sb voltage 1.2

pcie sata voltage 1.5

*********************************

load-line cal ibration (auto)

cpu spread spectrun disable

pcie spead spectrun disable

*********************************

 

 

ai overclock (manual)

cpu ratio setting 8

fsb frequency 400

pcie frequency 101

fsb strap to north bridge 400-333-266-200 Provali

dram frequency 800

dram timing control manual

1st information :4-4-4-12-auto-auto-auto-auto

2nd information :tutto auto

3rg information :tutto auto

dram static read control (auto)

dram read training (auto)

mem. oc charger (auto)

ai clock twister (auto)

ai transaction booster (auto)

c/p :a1 a2 |b1 b2

lvl : 06 06

********please key in numbers directly!****************

 

cpu voltage 1.4

cpu pll voltage 1.6

fsb termination voltage auto

dram voltage 1.9

nb voltage da 1,40 ad 1,50

sb voltage 1.2

pcie sata voltage 1.5

*********************************

load-line calibration enable

cpu spread spectrum disable

pcie spead spectrum disable

*********************************

Link to comment
Share on other sites

ora provo la tua configurazione grazie!!!!!!!!!!

 

A volte alcune ram con quelle latenze possono richiedere anche più voltaggio di quello che dichiarano, specie se OCZ. Adesso non ricordo che ram hai ma fai una prova anche con quelle se necessita. O le rilassi (5-5-5-15) o ne aumenti i volt ( anche 2,1)

Link to comment
Share on other sites

DDR2 1066Mhz 4GB OCZ HPC REAPER DC KIT CL5 rt (2x2GB)

queste sono le ram

 

Come immaginavo. Rilassa le latenze, mettile a 800Mhz, fai i test del procio alla frequenza desiderata e poi inizia con le ram, altrimenti farai sempre fatica a salire di frequenza.

Il Q6600 è facilissimo da portare fino a 3,6 Ghz a p atto che non sia limitato da altri componenti come le ram.

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

×
×
  • Create New...