valego Posted September 18, 2007 Share Posted September 18, 2007 CPU LGA775 socket for Intel® Core™2 Extreme / Core™2 Quad / Core™2 Duo / Pentium® Extreme / Pentium® D / Pentium® 4 / Celeron® D Processors Support Intel® next generation 45nm Multi-Core CPU Compatible with Intel® 06/05B/05A processors * Refer to ASUSTeK Computer for Intel CPU support list ** Please update the latest BIOS to support Intel 45nm CPU Chipset Intel® P35/ICH9R with Intel® Fast Memory Access Technology Front Side Bus 1333 / 1066 / 800 MHz Memoria Dual channel memory architecture 4 x DIMM, support max. 8GB, DDR2-1066*/800/667 MHz, non-ECC and un-buffered memory * The chipset officially supports the memory frequency up to DDR2 800 MHz. Due to the tuning by ASUS exclusive technology, this motherboard natively supports up to DDR2 1066MHz. Please refer to ASUSTeK Computer or user manual for Memory QVL Slot di Espansione 2 x PCIe x16 slot, support dual graphics solution 3 x PCIe x1 ( the PCIEx1_1 (black) is compatible with audio slot) 2 x PCI 2.2 CrossFire Support ATI CrossFire™ graphics cards (both at x8 mode) Storage ICH9R Southbridge: - 6 x SATA 3.0 Gb/s ports - Intel Matrix Storage Technology supports RAID 0, 1, 5 and 10. JMicron® JMB368 PATA controller: - 1 x UltraDMA 133/100/66/33 for up to 2 PATA devices LAN Dual Gigabit LAN controllers, both featuring AI NET2 High Definition Audio SupremeFX II Audio Card: - ADI 1988B 8-channel High Definition Audio CODEC - Noise Filter Coaxial, Optical S/PDIF out at back I/O IEEE 1394a 2 x 1394a ports(1 port at back I/O, 1 port onboard) USB max. 12 USB 2.0 ports(6 ports at mid-board, 6 ports at back panel) Caratteristiche di Overclock Fusion Block System Crosslinx Technology Extreme Tweaker 2-Phase DDR2 Loadline Calibration Intelligent overclocking tools: - CPU Level Up - AI NOS™ (Non-delay Overclocking System) - AI Overclocking (intelligent CPU frequency tuner) - ASUS AI Booster Utility - O.C Profile Overclocking Protection: - COP EX (Component Overheat Protection - EX) - Voltiminder LED - ASUS C.P.R.(CPU Parameter Recall) Caratteristiche Speciali LCD Poster Onboard Switches: Power / Reset / Cls CMOS (at rear) ASUS Q-Connector ASUS Q-Fan 2 ASUS EZ Flash 2 ASUS CrashFree BIOS 3 ASUS MyLogo3 Porte I/O Pannello Posteriore 1 x PS/2 Keyboard port(purple) 1 x PS/2 Mouse port(green) 1 x Optical + 1 x Coaxial S/PDIF Output 2 x LAN (RJ45) port 6 x USB 2.0/1.1 ports 1 x IEEE1394a port 1 x Clr CMOS switch Connettori I/O Interni 3 x USB 2.0 connectors supports additional 6 USB 2.0 ports 1 x Floppy disk drive connector 1 x IDE connector for two devices 6 x SATA connectors 8 x Fan connectors: 1 x CPU / 1 x PWR / 3 x Chassis / 3 x Optional 2 x thermal sensor connectors 1 x IEEE1394a connector 1 x S/PDIF output connector 1 x Chassis Intrusion connector 24-pin ATX Power connector 8-pin ATX 12V Power connector 1 x En/Dis-able Clr CMOS System panel connector BIOS 16Mb AMI BIOS, PnP, DMI2.0, WfM2.0, SM BIOS 2.4, ACPI2.0a Multi-Language BIOS Gestibilità WOL by PME, WOR by PME, Chasis Intrusion, PXE O/S Compatibility Window XP / Vista Accessori Fusion Block System Accessory LCD Poster DIY Pedestal ASUS Optional Fan SupremeFX II Audio Card 3 in 1 ASUS Q-Connector Kit UltraDMA 133/100/66 cable Floppy disk drive cable SATA cables SATA power cables 2-port USB2.0 + IEEE 1394a module I/O Shield Cable Ties User's manual Software The hottest 3D Game: S.T.A.L.K.E.R. Support DVD: - Drivers and applications ASUS PC Probe II ASUS Update ASUS AI Suite Futuremark ® 3DMark® 06 Advanced Edition Kaspersky® Anti-Virus Dimensioni ATX Form Factor, 12"x 9.6" (30.5cm x 24.5cm) Link al sito Asus: Blitz Formula Valerio Quote Link to comment Share on other sites More sharing options...
valego Posted September 18, 2007 Author Share Posted September 18, 2007 Bios, Drivers e Utilities BIOS 1101 All OS Dos Descrizione: Blitz Formula BIOS version 1101 1. Enhance PCIe VGA card compatibility 1002 All OS Dos Descrizione: Blitz Formula BIOS version 1002 1. Enables display of Ai Overclock items even when "CPU Level Up" was set 2. Added new option to allow disable "LCD Poster Backlight" after shut down (S5). 3. Changed the LCD Poster to display current time during S5. 4. Display CPU brand string in multi-line if it is too long. 0903 All OS Dos Descrizione: Blitz Formula Release BIOS version 0903 1. Fix s3 resume has no display if VGA plugs in second slot 2. Added an LCD Poster code "DET DRAM". 3. Fine tune CPU temperature calculation algorithm 4. Adjust PcProbII DRAM voltage high limit 0803 All OS Dos Descrizione: Blitz Formula Release BIOS version 0803 1. Initial Release BIOS UTULITIES Asus Update V7.10.05 Descrizione: ASUS Update V7.10.05 Install Program for Windows 2000/XP/2003/Vista & Windows 64bit XP/2003/Vista. AUDIO WinXP/2003/Vista 6.10.01.6260 Dimensione file 50.72MB Descrizione: SoundMAX Audio Driver v6.10.01.6260 for 32bit/64bit version of Windows XP/2003/Vista 1. Fix abnormal display when using jack sensing function under Japanese operating system. Vista 32/64Bit 6.10.01.6260 Dimensione file 50.72MB Descrizione: SoundMAX Audio Driver v6.10.01.6260 for 32bit/64bit version of Windows XP/2003/Vista 1. Fix abnormal display when using jack sensing function under Japanese operating system. UTILITIES ASUS PC ProbeII V1.04.19 Descrizione: ASUS PC ProbeII V1.04.19 Install Program for Windows 2000/XP/2003/Vista & Windows 64bit XP/2003/Vista. ASUS AI Suite V1.02.02 Descrizione: ASUS AI Suite V1.02.02 for Windows 2000/XP/XP 64bit XP/Vista 32bit/Vista 64bit. CHIPSET 8.3.0.1013 Descrizione: Intel Chipset Inf Update Program v8.3.0.1013 for Windows 32bit 2000/2000 server/XP/MCE/2003/Vista & 64bit XP/2003/Vista(WHQL). MANUALE Manuale Blitz Formula (Inglese) LCD POSTER Debug Code Table English Edition DOS LCD POSTER Debug Code Table English Edition All OS Fusion Block Installation Manual English Edition Quote Link to comment Share on other sites More sharing options...
valego Posted September 18, 2007 Author Share Posted September 18, 2007 Screenshot 1 Quote Link to comment Share on other sites More sharing options...
valego Posted September 18, 2007 Author Share Posted September 18, 2007 Screenshot 2 Quote Link to comment Share on other sites More sharing options...
valego Posted September 18, 2007 Author Share Posted September 18, 2007 Screeshot 3 Foto Blitz Formula Scheda audio Dotazione Quote Link to comment Share on other sites More sharing options...
valego Posted September 18, 2007 Author Share Posted September 18, 2007 Per questa sera è tutto appena la monto completo tutto il resto Valerio Quote Link to comment Share on other sites More sharing options...
hiwa Posted September 18, 2007 Share Posted September 18, 2007 iscritto :n2mu: thx Quote Link to comment Share on other sites More sharing options...
dj883u2 Posted September 18, 2007 Share Posted September 18, 2007 Gran bella scheda Vale!:n2mu: Ciao;) Quote Link to comment Share on other sites More sharing options...
dinamite2 Posted September 19, 2007 Share Posted September 19, 2007 Ragazzi qual'è il miglior bios per questa scheda madre? come fsb massimo come va? per le ram ci sono slot preferenziali? inoltre ho due dubbi..... cpu voltage reference a cosa serve? DDR2 CHANNELL A REF VOLTAGE DDR2 CONTROLLER REF VOLTAGE A cosa servono e come si regolano al meglio? Quote Link to comment Share on other sites More sharing options...
principino1984 Posted September 19, 2007 Share Posted September 19, 2007 a quanto so io.. Cpu voltage reference lascialo su auto... mentre i vari ddr2 channel e controller sono due voltaggi ausiliari che vanno a interessare singolarmente gli slot A e B della scheda madre, ma sinceramente dirti come impostarli per ora mi è impossibile... Spero che qualcuno possa aiutarti più di quello che posso fa io... :( marco Quote Link to comment Share on other sites More sharing options...
valego Posted September 19, 2007 Author Share Posted September 19, 2007 Stessa cosa, non saprei dirti come usarli :oooops: mentre per il bios la mia è arrivata con il 1101 questa sera ci ho fatto un giretto e non mi sembra male, altrimenti se non sbaglio hanno risolto vari problemi che si avevano con i divisori delle ram, però non so di preciso :boh: Valerio Quote Link to comment Share on other sites More sharing options...
dj883u2 Posted September 20, 2007 Share Posted September 20, 2007 Andate tranquilli che questa schedava molto bene! Ciao;) Quote Link to comment Share on other sites More sharing options...
valego Posted September 20, 2007 Author Share Posted September 20, 2007 Ragazzi ho un problema abbastanza fastidioso :( ogni volta che modifico i valori nel bios la mobo esegue il fake boot ma appena riparte rimane lo schermo tutto nero, non riesco nemmeno a fargli il reset o spegnerla tramite i tasti, l'unica soluzione è togliere l'alimentazione e poi riparte tranquilla, è già capitato a qualcuno? Valerio Quote Link to comment Share on other sites More sharing options...
principino1984 Posted September 21, 2007 Share Posted September 21, 2007 bella vale! ho visto tutte le foto che hai messo complimenti! Ora mancano giusto i test e qualcosa di scritto e poi te la butto sul portale come recensione! Grande vale! Marco Quote Link to comment Share on other sites More sharing options...
dj883u2 Posted September 21, 2007 Share Posted September 21, 2007 Ragazzi ho un problema abbastanza fastidioso :( ogni volta che modifico i valori nel bios la mobo esegue il fake boot ma appena riparte rimane lo schermo tutto nero, non riesco nemmeno a fargli il reset o spegnerla tramite i tasti, l'unica soluzione è togliere l'alimentazione e poi riparte tranquilla, è già capitato a qualcuno? Valerio Molto strano.....mai successo questa cosa..... Ciao;) Quote Link to comment Share on other sites More sharing options...
valego Posted September 21, 2007 Author Share Posted September 21, 2007 Infatti Anto è strana :boh: più che altro fastidiosa, vedremo se con un nuovo bios risolvo Valerio Quote Link to comment Share on other sites More sharing options...
dinamite2 Posted September 21, 2007 Share Posted September 21, 2007 Infatti Anto è strana :boh: più che altro fastidiosa, vedremo se con un nuovo bios risolvo Valerio ma ancora nulla come bios nuovi? nemmeno beta? Quote Link to comment Share on other sites More sharing options...
valego Posted September 21, 2007 Author Share Posted September 21, 2007 Fino a ieri nulla :( questa sera quando torno da lavoro provo a guardare Valerio Quote Link to comment Share on other sites More sharing options...
dj883u2 Posted September 21, 2007 Share Posted September 21, 2007 ma ancora nulla come bios nuovi?nemmeno beta? Ancora nulla!:boh: Ciao;) Quote Link to comment Share on other sites More sharing options...
dj883u2 Posted September 21, 2007 Share Posted September 21, 2007 Infatti Anto è strana :boh: più che altro fastidiosa, vedremo se con un nuovo bios risolvo Valerio Prova a rimettere nuovamente il bios. Magari risolvi!:n2mu: Ciao;) Quote Link to comment Share on other sites More sharing options...
valego Posted September 23, 2007 Author Share Posted September 23, 2007 Nulla da fare questo fastidioso inconveniente ce l'ho ancora, se non altro spero che risolvano con un nuovo bios, visto che ho letto in giro che non sono il solo ad averlo. Intanto ho fatto qualche test con le mie ram le TG 9600 ecco cosa ne è uscito dandogli 2,45v Salendo ancora mi frezza il monitor :( appena ho tempo provo con 2,55v Cmq la gestione delle ram della blitz è da panico :AAAAH: Valerio Quote Link to comment Share on other sites More sharing options...
dj883u2 Posted September 23, 2007 Share Posted September 23, 2007 Stupende ram vale!:n2mu::AAAAH: Ciao;) Quote Link to comment Share on other sites More sharing options...
principino1984 Posted September 23, 2007 Share Posted September 23, 2007 bella lì vale! Quote Link to comment Share on other sites More sharing options...
hiwa Posted September 23, 2007 Share Posted September 23, 2007 asp dj ke ti arrivano quelle Quote Link to comment Share on other sites More sharing options...
dj883u2 Posted September 23, 2007 Share Posted September 23, 2007 asp dj ke ti arrivano quelle Sono qui che aspetto!:n2mu: Ciao;) Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.