tom1 Posted March 6, 2012 Share Posted March 6, 2012 ASUS TUF Sabertooth Z77 Quote Link to comment Share on other sites More sharing options...
tom1 Posted March 6, 2012 Author Share Posted March 6, 2012 (edited) TUF Sabertooth Z77 CPU Intel® Socket 1155 for 3rd/2nd Generation Processors Supports Intel® 22 nm CPU Supports Intel® 32 nm CPU Supports Intel® Turbo Boost Technology 2.0 * The Intel® Turbo Boost Technology 2.0 support depends on the CPU types. Chipset Intel® Z77 Memory 4 x DIMM, Max. 32GB, DDR3 MHz Memory Dual Channel Memory Architecture Supports Intel® Extreme Memory Profile (XMP) * Hyper DIMM support is subject to the physical characteristics of individual CPUs. * Refer to ASUS or user manual for the Memory QVL (Qualified Vendors Lists). Graphic Integrated Graphics Processor Multi-VGA output support : HDMI/DisplayPort ports - Supports HDMI with max. resolution 1920 x 1200 @ 60 Hz - Supports DisplayPort with max. resolution 2560 x 1600 @ 60 Hz Maximum shared memory of 1696 MB Supports Intel® HD Graphics, InTru™ 3D, Quick Sync Video, Clear Video HD Technology, Insider™ Multi-GPU Support Supports NVIDIA® Quad-GPU SLI™ Technology Supports AMD Quad-GPU CrossFireX™ Technology Supports LucidLogix® Virtu™ MVP Technology *1 Expansion Slots 2 x PCIe 3.0/2.0 x16 (x16 or dual x8) *2 1 x PCIe 2.0 x16 (x4 mode, black) *3 3 x PCIe 2.0 x1 Storage Intel® Z77 chipset : 2 x SATA 6Gb/s port(s), brown 4 x SATA 3Gb/s port(s), black Support Raid 0, 1, 5, 10 Supports Intel® Smart Response Technology, Intel® Rapid Start Technology, Intel® Smart Connect Technology *4 ASMedia® ASM1061 controller : *5 2 x SATA 6Gb/s port(s), gray 2 x eSATA 6Gb/s port(s), red LAN Intel® 82579V, 1 x Gigabit LAN Controller(s) Audio Realtek® ALC892 8-Channel High Definition Audio CODEC - Supports : Jack-detection, Multi-streaming, Front Panel Jack-retasking Audio Feature : - Absolute Pitch 192kHz/ 24-bit True BD Lossless Sound - Blu-ray audio layer Content Protection - Optical S/PDIF out port(s) at back panel USB Ports Intel® Z77 chipset : *6 4 x USB 3.0 port(s) (2 at back panel, blue, 2 at mid-board) ASMedia® ASM1042 controller : *6 2 x USB 3.0 port(s) (2 at back panel, blue) Intel® Z77 chipset : 10 x USB 2.0 port(s) (4 at back panel, black, 6 at mid-board) Special Features TUF ENGINE! Power Design : - 8 +4 +2 Digital Phase Power Design - TUF Components (Choke, Cap. & MOSFET; certified by military-standard) - ASUS DIGI+ Power Control Utility Ultimate COOL! Thermal Solution : - TUF Thermal Armor - TUF Thermal Radar Safe & Stable! Guardian Angel : - Dust Defender ASUS Exclusive Features : - USB BIOS Flashback - MemOK! - AI Suite II - USB Charger+ - Anti-Surge - ESD Guards - ASUS UEFI BIOS EZ Mode featuring friendly graphics user interface - Network iControl - USB 3.0 Boost ASUS EZ DIY : - ASUS O.C. Profile - ASUS CrashFree BIOS 3 - ASUS EZ Flash 2 - ASUS MyLogo 2 - Multi-language BIOS ASUS Q-Design : - ASUS Q-Shield - ASUS Q-LED (CPU, DRAM, VGA, Boot Device LED) - ASUS Q-Slot - ASUS Q-DIMM - ASUS Q-Connector Back I/O Ports 1 x DisplayPort 1 x HDMI 2 x eSATA 6Gb/s 1 x LAN (RJ45) port(s) 4 x USB 3.0 4 x USB 2.0 1 x Optical S/PDIF out 6 x Audio jack(s) 1 x USB BIOS Flashback Button(s) Internal I/O Ports 1 x USB 3.0 connector(s) support(s) additional 2 USB 3.0 port(s) (19-pin, moss green) 3 x USB 2.0 connector(s) support(s) additional 6 USB 2.0 port(s) 4 x SATA 6Gb/s connector(s) 4 x SATA 3Gb/s connector(s) 1 x CPU Fan connector(s) (4 -pin) 1 x CPU OPT Fan connector(s) (4 -pin) 4 x Optional Fan connector(s) (4 -pin) 2 x Assistant Fan connector(s) (3 -pin) 1 x S/PDIF out header(s) 1 x 24-pin EATX Power connector(s) 1 x 8-pin ATX 12V Power connector(s) 1 x Front panel audio connector(s) (AAFP) 1 x System panel(s) (Q-Connector) 1 x MemOK! button(s) 1 x Clear CMOS jumper(s) Accessories User's manual Accessory Guide ASUS Q-Shield 2 x SATA 3Gb/s cable(s) 2 x SATA 6Gb/s cable(s) 1 x SLI bridge(s) 1 x Q-connector(s) (2 in 1) 2 x Accessory Fan(s) ( 35 mm ) 1 x TUF Certification card(s) 1 x TUF 5 Year Warranty manual(s) (by region) 1 x TUF Inside sticker(s) 1 x Accessory Package(s): - 1 x 40mm I/O Cover fan lid(s) - 3 x PCIe x16 slot dust cover(s) - 2 x DRAM slot dust cover(s) - 3 x PCIe x1 slot dust cover(s) - 2 x Short fan screw(s) - 4 x Long fan screw(s) - 1 x Adhesive Sponge(s) for 35mm Fan BIOS 64 Mb Flash ROM, UEFI AMI BIOS, PnP, DMI2.0, WfM2.0, SM BIOS 2.5, ACPI 2.0a, Multi-language BIOS, ASUS EZ Flash 2, ASUS CrashFree BIOS 3, F12 PrintScreen Function, F3 Shortcut Function and ASUS DRAM SPD (Serial Presence Detect) memory information Support Disc Drivers Anti-virus software (OEM version) ASUS Update ASUS Utilities Form Factor ATX Form Factor 12 inch x 9.6 inch ( 30.5 cm x 24.4 cm ) Edited April 8, 2012 by tom1 Quote Link to comment Share on other sites More sharing options...
tom1 Posted March 6, 2012 Author Share Posted March 6, 2012 (edited) Edited April 8, 2012 by tom1 Quote Link to comment Share on other sites More sharing options...
Cosmos Posted March 8, 2012 Share Posted March 8, 2012 Questa potrei farci un pensierino ovviamente se ritorno a Atx Quote Link to comment Share on other sites More sharing options...
tom1 Posted March 8, 2012 Author Share Posted March 8, 2012 quoto, io di un giretto mi accontento Quote Link to comment Share on other sites More sharing options...
Cosmos Posted March 8, 2012 Share Posted March 8, 2012 Comuqnue la più bella insieme alla G1 è questa, dove è Ivan sono tutte e due verdi , ci abbiniamo delle belle Akasa colore militare e via oppure alla G1 delle WB nere e verdi nvidia edition Quote Link to comment Share on other sites More sharing options...
tom1 Posted March 8, 2012 Author Share Posted March 8, 2012 green pc devil Quote Link to comment Share on other sites More sharing options...
Devil_Mcry Posted March 8, 2012 Share Posted March 8, 2012 io infatti ho la sabertooth p67 XD cmq la g1 mi piace di più per i colori :P tornando in topic, forse qui hanno un po esagerato con il thermal armor, sono curioso di vedere l'apparato di alimentazione della cpu purtroppo questa scheda, anche volendo, non potrei acquistarla. ho la xonar d1 nuova che è pci normale -.-... altra nota negativa, hanno ridotto ancora il numero di slot di espansione interni. ok che il pci-e 1x sotto il primo 16x è spesso inutilizzabile ma non tutti usano gpu dual slot Quote Link to comment Share on other sites More sharing options...
tom1 Posted March 9, 2012 Author Share Posted March 9, 2012 il problema che parte della dissipazione è semplice rivestimento plastico Quote Link to comment Share on other sites More sharing options...
j0h Posted March 18, 2012 Share Posted March 18, 2012 io infatti ho la sabertooth p67 XD cmq la g1 mi piace di più per i colori :P tornando in topic, forse qui hanno un po esagerato con il thermal armor, sono curioso di vedere l'apparato di alimentazione della cpu purtroppo questa scheda, anche volendo, non potrei acquistarla. ho la xonar d1 nuova che è pci normale -.-... altra nota negativa, hanno ridotto ancora il numero di slot di espansione interni. ok che il pci-e 1x sotto il primo 16x è spesso inutilizzabile ma non tutti usano gpu dual slot Eccoti accontentato anche se non si vede benissimo perchè ci sono i dissipatori: Comunque in effetti il riciclo dell'aria dovrebbe essere scarso li dentro, con una ventolina da 4cm si risolverebbe tutto secondo me Quote Link to comment Share on other sites More sharing options...
Le085 Posted March 18, 2012 Share Posted March 18, 2012 Eccoti accontentato anche se non si vede benissimo perchè ci sono i dissipatori: Comunque in effetti il riciclo dell'aria dovrebbe essere scarso li dentro, con una ventolina da 4cm si risolverebbe tutto secondo me la ventolina ci dovrebbe essere se non sbaglio Quote Link to comment Share on other sites More sharing options...
j0h Posted March 18, 2012 Share Posted March 18, 2012 forse, dova c'è la parte inclinata, vicino alle porte io Quote Link to comment Share on other sites More sharing options...
tom1 Posted March 19, 2012 Author Share Posted March 19, 2012 no Quote Link to comment Share on other sites More sharing options...
j0h Posted March 19, 2012 Share Posted March 19, 2012 e invece si se ne possono mettere due Quote Link to comment Share on other sites More sharing options...
j0h Posted March 19, 2012 Share Posted March 19, 2012 ha anche le cover per gli slot Quote Link to comment Share on other sites More sharing options...
ciberjack Posted March 19, 2012 Share Posted March 19, 2012 esteticamente spettacolare ma resto sempre del parere che quella cover non fa bene alle temps..... in oltre quelle ventoline faranno un casino assurdo... teniamo conto che nella maggior parte dei case (anche se liquidati) c'e almeno una ventola di immissione ed espulsione che creano un flusso migliore e piu efficente di quelle 2 ventoline che mi fanno quasi ridere Quote Link to comment Share on other sites More sharing options...
Cosmos Posted March 19, 2012 Share Posted March 19, 2012 occhio quella dissipazione funziona bene, solo mettendo il wb a liquido della mobo cambierebbe e sarebbe peggio, allora li andrebbe tolta la plastica protettiva Quote Link to comment Share on other sites More sharing options...
ciberjack Posted March 19, 2012 Share Posted March 19, 2012 perche sarebbe peggio liquidare la mobo? Quote Link to comment Share on other sites More sharing options...
Le085 Posted March 19, 2012 Share Posted March 19, 2012 nonostante tutto non dovrebbero essere molto rumorose quelle ventole. servono a garantire giusto quel minimo di flusso per tenere basse le temp e non far ristagnare l'aria (poi dovrebbero essere regolate termicamente dalla mobo) la cosa più interessante secondo me sono i copri slot pci express (non quelli del case per una volta ) visto che spesso ci va polvere e sporcizia che può causare problemi quando li andiamo ad usare. Ottima trovata. Brava LG Quote Link to comment Share on other sites More sharing options...
Cosmos Posted March 19, 2012 Share Posted March 19, 2012 Con quella copertura perchè il flusso si invertirebbe e quindi il dissi lavorerebbe al contrario Quote Link to comment Share on other sites More sharing options...
Le085 Posted March 19, 2012 Share Posted March 19, 2012 perche sarebbe peggio liquidare la mobo? non ho ben capito in effetti neanche io... ma intendi la mobo (chipset e mosfet) o la cpu? Quote Link to comment Share on other sites More sharing options...
Cosmos Posted March 19, 2012 Share Posted March 19, 2012 Bella comunque questa mobo con un case e ventole tutte intonate stile militare, se uscirà ad un prezzo decente è una delle migliori mobo per ivy,anche se comunque dato che la maximus extreme non è uscita se ritorno ad ATX prenderò la g1 sicuro, almeno che le msi non si dimostrino competitive ed allora un pensierino ce lo farei voglio tornare al nero e blu le Asus non mi piacciono proprio i dissi che hanno fatto, poi bisognia anche vedere come andranno e dato che stavolta non ho voglia di cambiare 10 mobo come per SB credo che aspettero un pò e poi deciderò.. Quote Link to comment Share on other sites More sharing options...
Cosmos Posted March 19, 2012 Share Posted March 19, 2012 In realtà non è un lastrone ma una specie piano rialzato che servirebbe a spandere l'aria che un dissi a sviluppo orizzontale butta sopra la cpu, l'aria si incanala e viene distribuita su tutti i componenti della mobo. Si mette a liquido o semplicemente si monta un dissi a sviluppo verticale ed ecco che quella bella copertura inizia a fare l'esatto contrario di quello che dovrebbe... Quote Link to comment Share on other sites More sharing options...
tom1 Posted March 20, 2012 Author Share Posted March 20, 2012 non serve a nulla di eclatante Quote Link to comment Share on other sites More sharing options...
tom1 Posted March 26, 2012 Author Share Posted March 26, 2012 Asus Sabertooth Z77 Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.