Jump to content

[Thread Ufficiale] ASRock Chipset INTEL Z77


keroro.90

Recommended Posts

Purtroppo con la semplice programmazione di Instant Flash è molto probabile che non sia possibile tornare indietro questo perchè nel bios stesso ci sono istruzioni impostate dai brand (anche da ami stessa) che è meglio non toccare.

Per questo genere di mod è sempre meglio avere il programmatore a portata di mano. :coolsmiley:

ok buono a sapersi allora passo cmq sotto alcuni aspetti era meglio una volta con il vecchio afudos, almeno potevi riscrivere tutto se conoscevi i comandi

Link to comment
Share on other sites

  • 6 months later...


  • 2 weeks later...
  • 1 year later...

Perdonami per la traduzione perché ho usato Google Traduttore per so la lingua italiana.

Ho richiesto un BIOS per Z77 Professional Fatal1ty con supporto NVMe, e AsRock mi ha inviato la versione 1.7D. Se aiuto su qualcosa, segue l'indirizzo (Google Drive) BIOS che AsRock mi ha mandato:

https://drive.google.com/open?id=0Bxifg0bH8KMNUzh4UGhYT0NTMWs

Ho richiesto un BIOS per Z77 Fatal1ty Professional con supporto NVMe, e AsRock mi ha inviato la versione 1.7D. Se aiuto su qualcosa, segue l'indirizzo (Google Drive) BIOS che AsRock mi ha mandato:https://drive.google.com/open?id=0Bxifg0bH8KMNUzh4UGhYT0NTMWs

Link to comment
Share on other sites

Perdonami per la traduzione perché ho usato Google Traduttore per so la lingua italiana.

Ho richiesto un BIOS per Z77 Professional Fatal1ty con supporto NVMe, e AsRock mi ha inviato la versione 1.7D. Se aiuto su qualcosa, segue l'indirizzo (Google Drive) BIOS che AsRock mi ha mandato:

https://drive.google.com/open?id=0Bxifg0bH8KMNUzh4UGhYT0NTMWs

Ho richiesto un BIOS per Z77 Fatal1ty Professional con supporto NVMe, e AsRock mi ha inviato la versione 1.7D. Se aiuto su qualcosa, segue l'indirizzo (Google Drive) BIOS che AsRock mi ha mandato:https://drive.google.com/open?id=0Bxifg0bH8KMNUzh4UGhYT0NTMWs

 

Welcome and Many Thanks for these shared BIOS :).

Link to comment
Share on other sites

Hi Labview, I'm so glad to hear it! Thank you.

 

I want to ask you: how may I build a bios? cause I also have a z68 Fatal1ty Professional Gen3, that doesn't work when I activate the XMP profile and my memories are on dual channel. It only works on single channel (when I put my memos on A1 A2 slots and leave B1 B2 empty). I thought that was the max trfc value of "stock" bios (255), but I've tried with the bios that you build (to z68 of course), with a max trfc value over 500, and the issue still remains. I also found a lot of people with the same problem with AsRock motherboards with the z68 chipset and G.SKILL memories.

 

I've tried with two memory kits, both G.SKILL:

G.SKILL 2x 4GB 1866Mhz CL8 (model F3-14900CL8D-8GBXM)

G.SKILL 4x 8GB 2400Mhz CL10 (model F3-2400C10Q-32GTX)

 

If you point me the north, I'm sure that I can fix it (or try at least, to be sure that it's not a bios issue, cause if it's a hw issue there is nothing I can do).

Edited by jcorrea
Link to comment
Share on other sites

  • 11 months later...
  • 3 months later...
2 ore fa, jcorrea dice:

Ciao Labview, ho scaricato la nuova versione bios di z77 Professional, ma dopo averla masterizzata sulla scheda (utilizzando Instant Flash), Intel ME non è stata aggiornata. Sai se esiste un modo per forzare l'aggiornamento?

Nessun problema :)

www.mdclab.it/BIOS-ME/ME 6-7.zip

1- Run MEInfo to control the version

2- Extract the firmware and rename the .bin file to ME.bin (to make it easier later on)

3- Extract the tool and go to Windows folder, copy ME.bin file alongside FWUpdLcl

4- Open a command prompt and type: FWUpdLcl -f ME.bin -allowsv

5- start your PC and run MEinfo

 

  • Thanks 1
Link to comment
Share on other sites

  • 2 years later...

Ciao Ragazzi,

ho una Z77 Extreme 4m.

Da qualche giorno ho alcuni problemi :

- alcuni voci del bios sono scomparse (es. non trovo più LOAD XMP Profiles, oppure alcune opzioni sulla scheda video nel North Bridge Configuration).

- non posso utilizzare 4 moduli di ram (che ho dal 2012).

Per quanto riguarda la RAM :

Se monto i moduli 2 a 2, vengono sempre riconosciuti :
- Slot1 + Slot3
- Slot2 + Slot4

Ho fatto il seguente test :

Ho testato Banco1 e Banco2 su Slot 1 e Slot 3 : Dual channel correttamente riconosciuto -> Dopo 2h di memory test nessun errore.

Ho testato Banco1 e Banco2 su Slot 2 e Slot 4 : Dual channel correttamente riconosciuto -> Dopo 2h di memory test nessun errore.

Ho testato Banco3 e Banco4 su Slot 1 e Slot 3 : Dual channel correttamente riconosciuto -> Dopo 2h di memory test nessun errore.

Ho testato Banco3 e Banco4 su Slot 2 e Slot 4 : Dual channel correttamente riconosciuto -> Dopo 2h di memory test nessun errore.

Da questo deduco che tutti gli slot funzionano e tutti i banchi funzionano.

Se monto tutti e 4 i banchi contemporaneamente, vengono riconosciuti solo 8 Gb (Slot2 e Slot4) e il MEMTEST da un sacco di errori.

Ho eseguito i seguenti azioni :


- clear CMOS (eseguito 5 volte)
- rimozione batteria bios
- disconnesso tutte le periferiche USB
- disconnesso tutte le perifiche SATA

BIOS corrotto ? Perchè alcune voci sono sparite ? Devo provare a fare un Reflash (avevo la 1.8 e oggi ho aggiornato alla 1.9) ma niente da fare.

 

Grazie,

Salvo

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

×
×
  • Create New...