Features

Hybrid Transformer:

Specially design transformer to improve thermal and efficiency.

Patent design transformer mount with heat sink, the size was reduced by up to 25% than the traditional transformer providing lesser energy consumption, while conducting the heat for better overall efficiency

HTT - Heat Transfer technology:

Patent design “L” shaped heat sink layout.

This technology helps to guide the air flow along the heat sink to improve the air circulation for maximum performance.

Hyper Path:

Patent design hyper link between IC and the relative components.

Patent energy conversion design path provides super efficient connection from the transformer to components. The signal can be transfer directly without any energy loss.

Single 12 V Power Rail

Tackling challenges from the most power-intensive peripherals head on, this solitary 12 V power rail provides ample power and strong resistance to any overloading.

Double-Layer EMI Filter

Dual protection from electromagnetic interference, thus restraining noise and interference for greater protection for you and your connections.

Intel Compliant

ATX12V v 2.3 and EPS version 2.91 compliant.

Intelligent Fan Speed Control

Speed control makes the 120 mm fan adept for any user’s circumstances and need.

Active PFC+ PWM Combo Controller

Integrating this active controller will increase the efficiency of any computer, making PFC higher than 99%.

Multiple Protection Design

Over Voltage Protection (OVP), Under Voltage Protection (UVP), Over Power Protection (OPP), Over Temperature Protection (OTP), Short Circuit Protection (SCP) and Over Current Protection (OCP).

Efficient Transformer

- Adeptly holding power for minimal loss in the 5V standby voltage so the system is promptly up and ready from power on or sleep modes

- Highly efficient design on par with 80Plus Gold requirements (90% typical).

And More

- Multiple updated connectors for all types of interfaces (PCIe, SATA etc.)

- Simple cable management utilizing flat modular cables for increased airflow.

- High reliability with an MBTF of at least 100,000 hours of use.

- NVIDIA SLI-Ready Certified guarantees enough ample power and up-to date connectors for SLI graphics cards.

- Five Year Warranty.

Specifications

Model RS-C00-80GA-D3

Type Intel Form Factor ATX 12V V2.3

SSI Form Factor EPS 12V V2.92

Dimension (W / H / D) 150 X 180 X 86 mm

5.9 x 7.09 x 3.4 inch

Input Voltage 90-264Vac (Auto Range)

Input Current 12.5 - 6A

Input Frequency Range 47-63Hz

PFC Active PFC (0.99)

Power Good Signal 100~500ms

Hold Up Time >17ms

Efficiency 90% typical

MTBF >100,000 hours

Protection OVP / UVP / OCP / OPP / OTP / SCP

Output Capacity 1200W

Max. Output Capacity 1440W

Operation Temperature 0~40°C (Nominal Input Voltage)

Regulatory CE / FCC / UL / TUV / C-Tick / GOST /

BSMI / CCC / KCC

Fan 135mm Ultra Silent Fan

Certifications SLI / CrossFire / 80 Plus Gold

Connector M/B 20 + 4 pins x 1

CPU 4 + 4 pins x 2

PCI-e 6+2 pins x 4 / PCI-e 6 pins x 4

(One PCI-e 6+2 pins connector

extends to one PCI-e 6 pins connector)

SATA x 9 / Peripheral 4 pins x 4

Floppy 4 pins x 1