Jump to content

[Thread Ufficiale]Gigabyte Chipset Intel X79

tom1

By tom1
in Schede Madri & RAM

 Share

Recommended Posts



tom1 Newbie

tom1

Posted
  • Author
Posted (edited)

G1.Assassin 2

 

i120091_g1.assassin-2.jpg

 

t120092_1.jpg t120093_2.jpg t120094_3.jpg

t120095_4.jpg

 

CPU

  1. Support for Intel® Core™ i7 processors in the LGA2011 package
  2. L3 cache varies with CPU

(Please refer "CPU Support List" for more information.) Chipset

  1. Intel® X79 Express Chipset

Memory

  1. 4 x 1.5V DDR3 DIMM sockets supporting up to 32 GB of system memory
    * Due to Windows 32-bit operating system limitation, when more than 4 GB of physical memory is installed, the actual memory size displayed will be less than 4 GB.
  2. 4 channel memory architecture
  3. Support for DDR3 2133/1866/1600/1333/1066 MHz memory modules
  4. Support for non-ECC memory modules
  5. Support for Extreme Memory Profile (XMP) memory modules

(Please refer "Memory Support List" for more information.) Audio

  1. 1 x Creative CA20K2 chip
  2. Support for Dolby® Digital Live and DTS™ Connect
  3. Support for X-Fi Xtreme Fidelity® and EAX® Advanced HD™ 5.0 technologies
  4. High Definition Audio
  5. 2/4/5.1/7.1-channel
  6. Support for S/PDIF Out

LAN

  1. 1 x Bigfoot Killer E2100 chip (10/100/1000 Mbit)

Expansion Slots

  1. 2 x PCI Express x16 slots, running at x16 (PCIEX16_1/PCIEX16_2)
    * For optimum performance, if only one PCI Express graphics card is to be installed, be sure to install it in the PCIEX16_1 slot; if you are installing two PCI Express graphics cards, it is recommended that you install them in the PCIEX16_1 and PCIEX16_2 slots.
  2. 1 x PCI Express x16 slot, running at x8 (PCIEX8)
    (All PCI Express x16 slots conform to PCI Express 3.0 standard.)
  3. 2 x PCI Express x1 slots
    (All PCI Express x1 slots conform to PCI Express 2.0 standard.)
  4. 1 x PCI slot

Multi-Graphics Technology

  1. Support for 3-Way/2-Way AMD CrossFireX™ / NVIDIA SLI technology
    * The PCIEX16_1/PCIEX16_2 slots operate at up to x8 mode when 3-Way AMD CrossFireX™/NVIDIA SLI is enabled.

Storage InterfaceChipset:

  1. 2 x SATA 6Gb/s connectors (SATA3 0/SATA3 1) supporting up to 2 SATA 6Gb/s devices
  2. 4 x SATA 3Gb/s connectors (SATA2 2~SATA2 5) supporting up to 4 SATA 3Gb/s devices
  3. Support for RAID 0, RAID 1, RAID 5, and RAID 10
    * When a RAID set is built across the SATA 6Gb/s and SATA 3Gb/s channels, the system performance of the RAID set may vary depending on the devices being connected.

2 x Marvell 88SE9172 chips:

  1. 2 x SATA 6Gb/s connectors (GSATA3 6/GSATA3 7) supporting up to 2 SATA 6Gb/s devices
  2. 2 x eSATA 6Gb/s connectors (eSATA/USB Combo) on the back panel supporting up to 2 SATA 6Gb/s devices
  3. Support for RAID 0 and RAID 1

USBChipset:

  1. Up to 14 USB 2.0/1.1 ports (8 ports on the back panel, including 2 eSATA/USB Combo, 6 ports available through the internal USB headers)

2 x Fresco FL1009 chips:

  1. Up to 4 USB 3.0/2.0 ports (2 ports on the back panel, 2 ports available through the internal USB header)

Internal I/O Connectors

  1. 1 x 24-pin ATX main power connector
  2. 1 x 8-pin ATX 12V power connector
  3. 4 x SATA 6Gb/s connectors
  4. 4 x SATA 3Gb/s connectors
  5. 1 x CPU fan header
  6. 4 x fan headers
  7. 1 x front panel header
  8. 1 x front panel audio header
  9. 1 x S/PDIF Out header
  10. 3 x USB 2.0/1.1 headers
  11. 1 x USB 3.0/2.0 header
  12. 1 x Clear CMOS jumper
  13. 1 x Trusted Platform Module (TPM) header

Back Panel Connectors

  1. 1 x PS/2 keyboard/mouse port
  2. 1 x CPU overclocking button
  3. 1 x BIOS switch button
  4. 1 x Clear CMOS button
  5. 1 x optical S/PDIF Out connector
  6. 6 x USB 2.0/1.1 ports
  7. 2 x USB 3.0/2.0 ports
  8. 2 x eSATA/USB Combo connectors
  9. 1 x RJ-45 port
  10. 5 x audio jacks (Center/Subwoofer Speaker Out, Rear Speaker Out, Side Speaker Out, Line In/Mic In, Line Out)

I/O Controller

  1. iTE IT8728 chip

H/W Monitoring

  1. System voltage detection
  2. CPU/System temperature detection
  3. CPU/System fan speed detection
  4. CPU overheating warning
  5. CPU/System fan fail warning
  6. CPU/System fan speed control
    * Whether the CPU/system fan speed control function is supported will depend on the CPU/system cooler you install.

BIOS

  1. 2 x 64 Mbit flash
  2. Use of licensed AMI EFI BIOS
  3. Support for DualBIOS™
  4. PnP 1.0a, DMI 2.0, SM BIOS 2.6, ACPI 2.0a

Unique Features

  1. Support for @BIOS
  2. Support for Q-Flash
  3. Support for Xpress BIOS Rescue
  4. Support for Download Center
  5. Support for Xpress Install
  6. Support for Xpress Recovery2
  7. Support for EasyTune
    * Available functions in EasyTune may differ by motherboard model.
  8. Support for Smart 6™
  9. Support for eXtreme Hard Drive (X.H.D)
  10. Support for ON/OFF Charge
  11. Support for Cloud OC
  12. Support for 3TB+ Unlock
  13. Support for TouchBIOS
  14. Support for Q-Share

Bundle Software

  1. Norton Internet Security (OEM version)

Operating System

  1. Support for Microsoft® Windows 7/Vista/XP

Form Factor

  1. E-ATX Form Factor; 30.5cm x 26.4cm

Remark

  • Due to different Linux support condition provided by chipset vendors, please download Linux driver from chipset vendors' website or 3rd party website.
  • Most hardware/software vendors may no longer offer drivers to support Win9X/ME/2000/XP SP1/SP2. If drivers are available from the vendors, we will update them on the GIGABYTE website.

Edited by tom1
Link to comment
Share on other sites
tom1 Newbie

tom1

Posted
  • Author
Posted (edited)

X79 UD7

 

i120096_x79-ud7.jpg

 

t120097_1.jpg t120098_2.jpg t120099_3.jpg

t120100_4.jpg

 

CPU

  1. Support for Intel® Core™ i7 processors in the LGA2011 package
  2. L3 cache varies with CPU

(Please refer "CPU Support List" for more information.) Chipset

  1. Intel® X79 Express Chipset

Memory

  1. 4 x 1.5V DDR3 DIMM sockets supporting up to 32 GB of system memory
    * Due to Windows 32-bit operating system limitation, when more than 4 GB of physical memory is installed, the actual memory size displayed will be less than 4 GB.
  2. 4 channel memory architecture
  3. Support for DDR3 2133/1866/1600/1333/1066 MHz memory modules
  4. Support for non-ECC memory modules
  5. Support for Extreme Memory Profile (XMP) memory modules

(Please refer "Memory Support List" for more information.) Audio

  1. Realtek ALC898 codec
  2. High Definition Audio
  3. 2/4/5.1/7.1-channel
  4. Support for Dolby® Home Theater
  5. Support for S/PDIF Out

LAN

  1. 1 x Intel GbE LAN (10/100/1000 Mbit)

Expansion Slots

  1. 2 x PCI Express x16 slots, running at x16 (PCIEX16_1, PCIEX16_2)
    * For optimum performance, if only one PCI Express graphics card is to be installed, be sure to install it in the PCIEX16 slot.
  2. 2 x PCI Express x16 slot, running at x8 (PCIEX8_1, PCIEX8_2)
    * The PCIEX8_2 slot shares bandwidth with the PCIEX16_2 slot. When the PCIEX8_2 slot is populated, the PCIEX16_2 slot will operate at up to x8 mode.
    (All PCI Express x16 slots conform to PCI Express 3.0 standard.)
  3. 3 x PCI Express x1 slots
    (All PCI Express x1 slots conform to PCI Express 2.0 standard.)

Multi-Graphics Technology

  1. Support for 4-Way/3-Way/2-Way AMD CrossFireX™/NVIDIA SLI technology
    The PCIEX16 slots operate at up to x8 mode when 4-Way/3-Way AMD CrossFireX™/NVIDIA SLI is enabled.

Storage InterfaceChipset:

  1. 2 x SATA 6Gb/s connectors (SATA3 0/1) supporting up to 2 SATA 6Gb/s devices
  2. 4 x SATA 3Gb/s connectors (SATA2 2/3/4/5) supporting up to 4 SATA 3Gb/s devices
  3. Support for RAID 0, RAID 1, RAID 5, and RAID 10
    * When a RAID set is built across the SATA 6Gb/s and SATA 3Gb/s channels, the system performance of the RAID set may vary depending on the devices being connected.

2 x Marvell 88SE9172 chips:

  1. 4 x SATA 6Gb/s connectors (GSATA3 6/7/8/9) supporting up to 4 SATA 6Gb/s devices
  2. Support for SATA RAID 0 and RAID 1

USBChipset:

  1. Up to 14 USB 2.0/1.1 ports (8 ports on the back panel, 6 ports available through the internal USB headers)

2 x Fresco FL1009 chips:

  1. Up to 4 USB 3.0/2.0 ports (2 ports on the back panel, 2 ports available through the internal USB header)

Internal I/O Connectors

  1. 1 x 24-pin ATX main power connector
  2. 2 x 8-pin ATX 12V power connectors
  3. 2 x PCIe power connectors
  4. 6 x SATA 6Gb/s connectors
  5. 4 x SATA 3Gb/s connectors
  6. 1 x CPU fan header
  7. 6 x system fan headers
  8. 1 x front panel header
  9. 1 x front panel audio header
  10. 1 x S/PDIF Out header
  11. 3 x USB 2.0/1.1 headers
  12. 1 x USB 3.0/2.0 header
  13. 1 x Clear CMOS jumper
  14. 1 x power button
  15. 1 x reset button
  16. 1 x onboard voltage measurement module
  17. 1 x Gear button
  18. 1 x CPU BCLK Down button
  19. 1 x CPU BCLK Up button
  20. 1 x CPU Ratio Down button
  21. 1 x CPU Ratio Up button
  22. 1 x Trusted Platform Module (TPM) header

Back Panel Connectors

  1. 1 x PS/2 keyboard/mouse port
  2. 1 x CPU overclocking button
  3. 1 x BIOS switch button
  4. 1 x Clear CMOS button
  5. 8 x USB 2.0/1.1 ports
  6. 2 x USB 3.0/2.0 ports
  7. 1 x RJ-45 port
  8. 1 x optical S/PDIF Out connector
  9. 5 x audio jacks (Center/Subwoofer Speaker Out, Rear Speaker Out, Side Speaker Out, Line In, Mic In, Line Out)

I/O Controller

  1. iTE IT8728 chip

H/W Monitoring

  1. System voltage detection
  2. CPU/System temperature detection
  3. CPU/System fan speed detection
  4. CPU overheating warning
  5. CPU/System fan fail warning
  6. CPU/System fan speed control
    * Whether the CPU/system fan speed control function is supported will depend on the CPU/system cooler you install.

BIOS

  1. 2 x 64 Mbit flash
  2. Use of licensed AMI EFI BIOS
  3. Support for DualBIOS™
  4. PnP 1.0a, DMI 2.0, SM BIOS 2.6, ACPI 2.0a

Unique Features

  1. Support for @BIOS
  2. Support for Q-Flash
  3. Support for Xpress BIOS Rescue
  4. Support for Download Center
  5. Support for Xpress Install
  6. Support for Xpress Recovery2
  7. Support for EasyTune
    * Available functions in EasyTune may differ by motherboard model.
  8. Support for Smart 6™
  9. Support for eXtreme Hard Drive (X.H.D)
  10. Support for ON/OFF Charge
  11. Support for Cloud OC
  12. Support for 3TB+ Unlock
  13. Support for TouchBIOS
  14. Support for Q-Share

Bundle Software

  1. Norton Internet Security (OEM version)

Operating System

  1. Support for Microsoft® Windows 7/Vista/XP

Form Factor

  1. XL-ATX Form Factor; 32.4cm x 25.3cm

Remark

  • Due to different Linux support condition provided by chipset vendors, please download Linux driver from chipset vendors' website or 3rd party website.
  • Most hardware/software vendors may no longer offer drivers to support Win9X/ME/2000/XP SP1/SP2. If drivers are available from the vendors, we will update them on the GIGABYTE website.

Edited by tom1
Link to comment
Share on other sites
tom1 Newbie

tom1

Posted
  • Author
Posted (edited)

X79 UD5

 

i120101_x79-ud5.jpg

 

t120102_1.jpg t120103_2.jpg t120104_3.jpg

t120105_4.jpg

 

CPU

  1. Support for Intel® Core™ i7 processors in the LGA2011 package
  2. L3 cache varies with CPU

(Please refer "CPU Support List" for more information.) Chipset

  1. Intel® X79 Express Chipset

Memory

  1. 8 x 1.5V DDR3 DIMM sockets supporting up to 64 GB of system memory
    * Due to Windows 32-bit operating system limitation, when more than 4 GB of physical memory is installed, the actual memory size displayed will be less than 4 GB.
  2. 4 channel memory architecture
  3. Support for DDR3 2133/1866/1600/1333/1066 MHz memory modules
  4. Support for non-ECC memory modules
  5. Support for Extreme Memory Profile (XMP) memory modules

(Please refer "Memory Support List" for more information.) Audio

  1. Realtek ALC898 codec
  2. High Definition Audio
  3. 2/4/5.1/7.1-channel
  4. Support for Dolby® Home Theater
  5. Support for S/PDIF Out

LAN

  1. 1 x Intel GbE LAN (10/100/1000 Mbit)

Expansion Slots

  1. 2 x PCI Express x16 slots, running at x16 (PCIEX16_1/PCIEX16_2)
    * For optimum performance, if only one PCI Express graphics card is to be installed, be sure to install it in the PCIEX16_1 slot; if you are installing two PCI Express graphics cards, it is recommended that you install them in the PCIEX16_1 and PCIEX16_2 slots.
  2. 1 x PCI Express x16 slot, running at x8 (PCIEX8)
    (All PCI Express x16 slots conform to PCI Express 3.0 standard.)
  3. 2 x PCI Express x1 slots
    (All PCI Express x1 slots conform to PCI Express 2.0 standard.)
  4. 1 x PCI slot

Multi-Graphics Technology

  1. Support for 3-Way/2-Way AMD CrossFireX™ / NVIDIA SLI technology
    The PCIEX16_1/PCIEX16_2 slots operate at up to x8 mode when 3-Way AMD CrossFireX™/NVIDIA SLI is enabled.

Storage InterfaceChipset:

  1. 2 x SATA 6Gb/s connectors (SATA3 0/SATA3 1) supporting up to 2 SATA 6Gb/s devices
  2. 4 x SATA 3Gb/s connectors (SATA2 2~SATA2 5) supporting up to 4 SATA 3Gb/s devices
  3. Support for RAID 0, RAID 1, RAID 5, and RAID 10
    * When a RAID set is built across the SATA 6Gb/s and SATA 3Gb/s channels, the system performance of the RAID set may vary depending on the devices being connected.

3 x Marvell 88SE9172 chips:

  1. 4 x SATA 6Gb/s connectors (GSATA3 6~GSATA3 9) supporting up to 4 SATA 6Gb/s devices
  2. 1 x eSATA 6Gb/s connector (eSATA/USB Combo) on the back panel supporting up to 1 SATA 6Gb/s device
  3. 1 x eSATA 6Gb/s connector on the back panel supporting up to 1 SATA 6Gb/s device
  4. Support for SATA RAID 0 and RAID 1

USBChipset:

  1. Up to 14 USB 2.0/1.1 ports (8 ports on the back panel, including 1 eSATA/USB Combo, 6 ports available through the internal USB headers)

2 x Fresco FL1009 chips:

  1. Up to 4 USB 3.0/2.0 ports (2 ports on the back panel, 2 ports available through the internal USB headers)

IEEE 1394VIA VT6308 chip:

  1. Up to 2 IEEE 1394a ports (1 port on the back panel, 1 port available through the internal IEEE 1394a header)

Internal I/O Connectors

  1. 1 x 24-pin ATX main power connector
  2. 1 x 8-pin ATX 12V power connector
  3. 6 x SATA 6Gb/s connectors
  4. 4 x SATA 3Gb/s connectors
  5. 1 x CPU fan header
  6. 4 x system fan headers
  7. 1 x front panel header
  8. 1 x front panel audio header
  9. 1 x S/PDIF Out header
  10. 3 x USB 2.0/1.1 headers
  11. 1 x USB 3.0/2.0 header
  12. 1 x IEEE 1394a header
  13. 1 x Clear CMOS jumper
  14. 1 x Trusted Platform Module (TPM) header

Back Panel Connectors

  1. 1 x PS/2 keyboard/mouse port
  2. 1 x CPU overclocking button
  3. 1 x BIOS switch button
  4. 1 x Clear CMOS button
  5. 1 x IEEE 1394 port
  6. 7 x USB 2.0/1.1 ports
  7. 2 x USB 3.0/2.0 ports
  8. 1 x eSATA/USB Combo connector
  9. 1 x eSATA connector
  10. 1 x RJ-45 port
  11. 1 x optical S/PDIF Out connector
  12. 5 x audio jacks (Center/Subwoofer Speaker Out, Rear Speaker Out, Side Speaker Out, Line In/Mic In, Line Out)

I/O Controller

  1. iTE IT8728 chip

H/W Monitoring

  1. System voltage detection
  2. CPU/System temperature detection
  3. CPU/System fan speed detection
  4. CPU overheating warning
  5. CPU/System fan fail warning
  6. CPU/System fan speed control
    * Whether the CPU/system fan speed control function is supported will depend on the CPU/system cooler you install.

BIOS

  1. 2 x 64 Mbit flash
  2. Use of licensed AMI EFI BIOS
  3. Support for DualBIOS™
  4. PnP 1.0a, DMI 2.0, SM BIOS 2.6, ACPI 2.0a

Unique Features

  1. Support for @BIOS
  2. Support for Q-Flash
  3. Support for Xpress BIOS Rescue
  4. Support for Download Center
  5. Support for Xpress Install
  6. Support for Xpress Recovery2
  7. Support for EasyTune
    * Available functions in EasyTune may differ by motherboard model.
  8. Support for Smart 6™
  9. Support for eXtreme Hard Drive (X.H.D)
  10. Support for ON/OFF Charge
  11. Support for Cloud OC
  12. Support for TouchBIOS
  13. Support for 3TB+ Unlock
  14. Support for Q-Share

Bundle Software

  1. Norton Internet Security (OEM version)

Operating System

  1. Support for Microsoft® Windows 7/Vista/XP

Form Factor

  1. E-ATX Form Factor; 30.5cm x 26.4cm

Remark

  • Due to different Linux support condition provided by chipset vendors, please download Linux driver from chipset vendors' website or 3rd party website.
  • Most hardware/software vendors may no longer offer drivers to support Win9X/ME/2000/XP SP1/SP2. If drivers are available from the vendors, we will update them on the GIGABYTE website.

Edited by tom1
Link to comment
Share on other sites
tom1 Newbie

tom1

Posted
  • Author
Posted (edited)

X79-UD3

 

i120106_x79-ud3.jpg

 

t120107_1.jpg t120108_2.jpg t120109_3.jpg

 

 

CPU

  1. Support for Intel® Core™ i7 processors in the LGA2011 package package
  2. L3 cache varies with CPU

(Please refer "CPU Support List" for more information.) Chipset

  1. Intel® X79 Express Chipset

Memory

  1. 4 x 1.5V DDR3 DIMM sockets supporting up to 32 GB of system memory
    * Due to Windows 32-bit operating system limitation, when more than 4 GB of physical memory is installed, the actual memory size displayed will be less than 4 GB.
  2. 4 channel memory architecture
  3. Support for DDR3 2133/1866/1600/1333/1066 MHz memory modules
  4. Support for non-ECC memory modules
  5. Support for Extreme Memory Profile (XMP) memory modules

(Please refer "Memory Support List" for more information.) Audio

  1. Realtek ALC898 codec
  2. High Definition Audio
  3. 2/4/5.1/7.1-channel
  4. Support for Dolby® Home Theater
  5. Support for S/PDIF Out

LAN

  1. 1 x Intel GbE LAN (10/100/1000 Mbit)

Expansion Slots

  1. 2 x PCI Express x16 slots, running at x16 (PCIEX16_1, PCIEX16_2)
    * For optimum performance, if only one PCI Express graphics card is to be installed, be sure to install it in the PCIEX16 slot.
  2. 2 x PCI Express x16 slots, running at x8 (PCIEX8_1, PCIEX8_2)
    * The PCIEX8_2 slot shares bandwidth with the PCIEX16_2 slot. When the PCIEX8_2 slot is populated, the PCIEX16_2 slot will operate at up to x8 mode.
    (All PCI Express x16 slots conform to PCI Express 3.0 standard.)
  3. 2 x PCI Express x1 slots
    (All PCI Express x1 slots conform to PCI Express 2.0 standard.)
  4. 1 x PCI slot

Multi-Graphics Technology

  1. Support for 4-Way/3-Way/2-Way AMD CrossFireX™/NVIDIA SLI technology
    * The PCIEX16 slots operate at up to x8 mode when 4-Way/3-Way AMD CrossFireX™/NVIDIA SLI is enabled.

Storage InterfaceChipset:

  1. 2 x SATA 6Gb/s connectors (SATA3 0/1) supporting up to 2 SATA 6Gb/s devices
  2. 4 x SATA 3Gb/s connectors (SATA2 2/3/4/5) supporting up to 4 SATA 3Gb/s devices
  3. Support for RAID 0, RAID 1, RAID 5, and RAID 10
    * When a RAID set is built across the SATA 6Gb/s and SATA 3Gb/s channels, the system performance of the RAID set may vary depending on the devices being connected.

3 x Marvell 88SE9172 chips:

  1. 4 x SATA 6Gb/s connectors (GSATA3 6/7/8/9) supporting up to 4 SATA 6Gb/s devices
  2. 2 x eSATA 6Gb/s connectors on the back panel, supporting up to 2 SATA 6Gb/s devices
  3. Support for RAID 0 and RAID 1

USBChipset:

  1. Up to 14 USB 2.0/1.1 ports (8 ports on the back panel, 6 ports available through the internal USB headers)

2 x Fresco FL1009 chips:

  1. Up to 4 USB 3.0/2.0 ports (2 ports on the back panel, 2 ports available through the internal USB header)

Internal I/O Connectors

  1. 1 x 24-pin ATX main power connector
  2. 1 x 8-pin ATX 12V power connector
  3. 6 x SATA 6Gb/s connectors
  4. 4 x SATA 3Gb/s connectors
  5. 1 x CPU fan header
  6. 4 x system fan headers
  7. 1 x front panel header
  8. 1 x front panel audio header
  9. 1 x S/PDIF Out header
  10. 3 x USB 2.0/1.1 headers
  11. 1 x USB 3.0/2.0 header
  12. 1 x serial port header
  13. 1 x Clear CMOS jumper
  14. 1 x Trusted Platform Module (TPM) header

Back Panel Connectors

  1. 1 x PS/2 keyboard/mouse port
  2. 1 x optical S/PDIF Out connector
  3. 1 x coaxial S/PDIF Out connector
  4. 8 x USB 2.0/1.1 ports
  5. 2 x USB 3.0/2.0 ports
  6. 2 x eSATA 6Gb/s connectors
  7. 1 x RJ-45 port
  8. 6 x audio jacks (Center/Subwoofer Speaker Out/Rear Speaker Out/Side Speaker Out/Line In/Line Out/Microphone)

I/O Controller

  1. iTE IT8728 chip

H/W Monitoring

  1. System voltage detection
  2. CPU/System temperature detection
  3. CPU/System fan speed detection
  4. CPU overheating warning
  5. CPU/System fan fail warning
  6. CPU/System fan speed control
    * Whether the CPU/system fan speed control function is supported will depend on the CPU/system cooler you install.

BIOS

  1. 2 x 64 Mbit flash
  2. Use of licensed AMI EFI BIOS
  3. Support for DualBIOS™
  4. PnP 1.0a, DMI 2.0, SM BIOS 2.6, ACPI 2.0a

Unique Features

  1. Support for @BIOS
  2. Support for Q-Flash
  3. Support for Xpress BIOS Rescue
  4. Support for Download Center
  5. Support for Xpress Install
  6. Support for Xpress Recovery2
  7. Support for EasyTune
    * Available functions in EasyTune may differ by motherboard model.
  8. Support for Smart 6™
  9. Support for eXtreme Hard Drive (X.H.D)
  10. Support for ON/OFF Charge
  11. Support for Cloud OC
  12. Support for 3TB+ Unlock
  13. Support for TouchBIOS
  14. Support for Q-Share

Bundle Software

  1. Norton Internet Security (OEM version)

Operating System

  1. Support for Microsoft® Windows 7/Vista/XP

Form Factor

  1. ATX Form Factor; 30.5cm x 24.4cm

Remark

  • Due to different Linux support condition provided by chipset vendors, please download Linux driver from chipset vendors' website or 3rd party website.
  • Most hardware/software vendors may no longer offer drivers to support Win9X/ME/2000/XP SP1/SP2. If drivers are available from the vendors, we will update them on the GIGABYTE website.

Edited by tom1
Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

×
 Share
Go to topic listing
×
×
  • Create New...