tom1 Posted June 24, 2011 Share Posted June 24, 2011 (edited) Thread Ufficiale della Serie Obsidian di Corsair 550D - 650D - 700D - 800D Corsair ha proposto nel corso di questi anni ben quattro modelli della serie Obsidian, case dalle forme lineari ma con soluzioni davvero interessanti, colorazione black e predisposizione per impianti a liquido. I quattro case della serie Obsidian sono il: 550D 650D 700D 800D Edited January 12, 2012 by Le085 Quote Link to comment Share on other sites More sharing options...
tom1 Posted June 24, 2011 Author Share Posted June 24, 2011 (edited) 550D Caratteristiche Generali A revolutionary combination of noise reduction and cooling. Obsidian Series 550D is carefully engineered for noise reduction and sound isolation. But, it’s not just about keeping things quiet — there’s amazing cooling potential, lots of expansion flexibility, and the durability that Obsidian Series is renowned for. Superior airflow for high-performance PCs. Obsidian Series 550D comes with two front-mounted 120mm intake fans and one 120mm exhaust fan – more than enough for delivering the airflow required for a high-performance system. But if you’re pushing past high performance and into the realm of extreme-performance overclocking, there’s room for a lot more. The top panel provides room for two 120mm or 140mm fans, or a 240mm radiator for compatibility with Corsair Hydro Series CPU coolers and other liquid cooling systems. The side panel has mounting points for another two 120mm or 140mm fans for cooling multiple GPUs. In total, the 550D offers ten 120mm fan mounting points, six of which can also accommodate 140mm fans. The silent treatment. With many high-end PC cases, cooling is often provided without consideration for noise. Not so with the 550D: the front and side panels are fully lined with sound-damping material, and the top and side panels have their own sound-insulated vent covers to reduce noise leakage from unused fan mounting locations. The front air intakes are angled away from the front of the case for noise reduction, and the fans and drive bays use silicone mounts to reduce vibration noise. The result is a platform for building high-performance PCs you can live with. Smart features for serious builders. The extra touches like magnetically mounted dust filters and one-button side panel removal make building fun, and using a 550D-based system a rewarding experience. Expansion is easy, with eight expansion slots, six tool-free hard drive bays with removable caddies and integrated 2.5” SSD support, and four tool-free optical drive bays. The top drive cage can be removed to accommodate GPUs of up to 452mm in length. The diamond-cut brushed aluminum front panel houses two high-speed USB 3.0 connectors and audio ports. The Obsidian Series: Designed by builders, for builders World-class Obsidian Series cases are made from stamped steel and brushed aluminum, providing both outstanding durability and great looks. State-of-the-art features are engineered with the singular purpose of meeting the needs of professional builders, high-end system integrators, and performance enthusiasts. Builds are straightforward and efficient, and there’s room for nearly any system configuration you can imagine. Obsidian 550D Package contents Obsidian Series 550D Quick Start Guide Installation kit Technical Specifications Four 5.25” drive bays Six 3.5” hard drive bays with 2.5” compatibility Eight expansion slots Supports most 240mm dual radiators (15mm spacing) Two-year warranty Front I/O panel contains: Two USB 3.0 connectors 3.5” headphone and microphone connector Power and reset switches [*]Dimensions: 20.9” x 8.7” x 19.5” [*]Ten available fan mount locations Six 120mm/140mm fan mount locations Four 120mm fan mount locations One 200MM side panel fan mount location [*]Three 120mm fans included Compatibility ATX and Micro ATX motherboards Caratteristiche Generali 650D Quality Construction The Obsidian Series 650D mid-tower case is manufactured with strong, stamped steel parts for increased rigidity, and coated in a black textured paint. The front panel features a beautiful black brushed aluminum faceplate to bring a subtle elegance to your next build. Excellent Cooling A large, black 200mm intake fan hides behind the front dust filter, quietly pushing vast amounts of air over your hard drives and video cards. The air is then exhausted by a second 200mm fan on top of the case, and a rear 120mm fan. The top fan can be replaced by dual 120mm or 140mm fans, and is pre-spaced for a dual radiator if you’re interested in watercooling. And all fans are controlled by a three-mode, four-channel fan controller should you want to make your own choice between noise and performance. Award-Winning Features The 650D is a member of the award-winning Obsidian Series of cases from Corsair. The Obsidian Series is more than just a name — it means real features that can benefit even the most experienced system builder. Dual 200mm fans provide outstanding cooling for even the hottest components Easily accessible dust filters make maintenance simple and hassle-free Quick-release side panels make it easier than ever to upgrade your hardware Integrated fan controller lets you quickly adjust cooling performance and noise levels Four tool-free optical drive bays and up to six SSD-ready hard drive trays provide plenty of expansion CPU backplate cutout makes it easy to upgrade your CPU cooler Brilliant cable routing system provides a way to keep your system neat and tidy Adjustable drive cages can be removed and relocated to accommodate large video cards Room for long power supplies gives you peace of mind for future upgrades 700D Designed for Years of Performance The Obsidian Series 700D is built to last through years of motherboard, power, memory, cooling, and component upgrades. The steel structure has a matte black coating both inside out and is finished with a brushed aluminum faceplate for a professional look that's both serious and awe-inspiring. Three Isolated Cooling Zones The power supply compartment, main compartment and the SATA bays each have dedicated cooling subsystems to prevent heat buildup. A dust-filtered 140mm fan draws in cold air at the bottom of the case and exhausts it at the rear and top. This clever design forces fresh air directly over the graphics card and CPU. The hard drive / SSD bays are cooled by a separate 140mm fan which vents from the case via a sealed chamber and prevents the heat generated by the drives from entering the main compartment. The power supply compartment has its own dedicated intake and exhaust, also isolated from the main compartment. Need even more cooling performance? The Obsidian Series 700D has pre-drilled support for top-mounted single, dual, and triple radiators, or up to three additional 120mm fans. Advanced Features for Extreme Flexibility Six drive bays with clever snap-in trays accommodate both 3.5" and 2.5" drives with no adapter necessary. A unique cable routing system virtually eliminates cable clutter that can impede airflow. The tool-free design allows for easy entry, easy access, and quick installation of 5.25" drives. Features include Six HDD / SSD drive bays compatible with both 3.5" and 2.5" drives Removable CPU backplate panel for easy heatsink installation Isolated cooling zones prevent heat buildup Unique cable routing holes guarantee a clean and clutter-free installation Three 140mm fans included, with the ability to add four more 120mm fans Tool-free optical drive installation makes building a system faster than ever Two year warranty with Corsair's world-class customer service and technical support 800D Designed for Years of Performance The Obsidian Series 800D is built to last through years of motherboard, power, memory, cooling, and component upgrades. The steel structure has a matte black coating both inside out and is finished with a brushed aluminum faceplate for a professional look that's both serious and awe-inspiring. A windowed side panel makes it easy to show off your work. Three Isolated Cooling Zones The power supply compartment, main compartment and the SATA bays each have dedicated cooling subsystems to prevent heat buildup. A dust-filtered 140mm fan draws in cold air at the bottom of the case and exhausts it at the rear and top. This clever design forces fresh air directly over the graphics card and CPU. The SATA hot-swap bays are cooled by a separate 140mm fan which vents from the case via a sealed chamber and prevents the heat generated by the drives from entering the main compartment. The power supply compartment has its own dedicated intake and exhaust, also isolated from the main compartment. Need even more cooling performance? The Obsidian Series 800D has pre-drilled support for top-mounted single, dual, and triple radiators, or up to three additional 120mm fans. Advanced Features for Extreme Flexibility A four-drive SATA hot-swap drive bay sits in the front of the case, making it easier to install or swap hard drives on the fly. A unique cable routing system virtually eliminates cable clutter that can impede airflow. The tool-free design allows for easy entry, easy access, and quick installation of 5.25” drives. Features include Four easily accessed hot-swap drive bays Removable CPU backplate panel for easy heatsink installation Isolated cooling zones prevent heat buildup Unique cable routing holes guarantee a clean and clutter-free installation Three 140mm fans included, with the ability to add four more 120mm fans Tool-free optical drive installation makes building a system faster than ever Two year warranty with Corsair's world-class customer service and technical support Edited January 12, 2012 by Le085 Quote Link to comment Share on other sites More sharing options...
tom1 Posted June 24, 2011 Author Share Posted June 24, 2011 (edited) Specifiche Tecniche 650D 700D 800D Edited June 24, 2011 by tom1 Quote Link to comment Share on other sites More sharing options...
tom1 Posted June 24, 2011 Author Share Posted June 24, 2011 (edited) Galleria 650D 700D 800D Edited June 26, 2011 by tom1 Quote Link to comment Share on other sites More sharing options...
tom1 Posted June 24, 2011 Author Share Posted June 24, 2011 riservato 4 Quote Link to comment Share on other sites More sharing options...
bear85roma Posted June 24, 2011 Share Posted June 24, 2011 eccellente tread!!! Quote Link to comment Share on other sites More sharing options...
tom1 Posted June 25, 2011 Author Share Posted June 25, 2011 marco potresti anche postare foto del tuo cosi le aggiungo e invito tutti i possessori di un case serie obsdian a postare le foto del proprio Quote Link to comment Share on other sites More sharing options...
tom1 Posted June 26, 2011 Author Share Posted June 26, 2011 Per il fratello maggiore ovvero il Corsair Obsidian 800D è disponibile questo Upgrade kit al nuovo standard sata 3 con velocità 6 Gb/s Quote Link to comment Share on other sites More sharing options...
rookieboy Posted June 28, 2011 Share Posted June 28, 2011 quale onore essere il primo a postare foto del mio nuovo case! a proposito del kit sata 6gbs; sinceramente, in configurazione standard, il crucual c300 va qualcosina in meno in lettura, ma direi che è una perdita trascurabile, nel dubbio, visto il costo abbastanza contenuto del kit, l'ho preso e non appena lo monterò, mi giocherò qualche ciclo di scritture per postare dei bench ho finito ieri di assemblare il secondo step dell'impianto a liquido sul 800D, manca ancora l'illuminazione.. Quote Link to comment Share on other sites More sharing options...
tom1 Posted June 28, 2011 Author Share Posted June 28, 2011 ottimo impianto e nell 800D ci sta una meraviglio grazie al suo spazio e alle soluzioni di cable management Quote Link to comment Share on other sites More sharing options...
One1ros Posted June 29, 2011 Share Posted June 29, 2011 >Spettacolo di sistema rookie. Quote Link to comment Share on other sites More sharing options...
rookieboy Posted June 29, 2011 Share Posted June 29, 2011 >Spettacolo di sistema rookie. :) Grazie 1000! spero di riuscire a breve di passare al 3° step.. Quote Link to comment Share on other sites More sharing options...
Le085 Posted June 29, 2011 Share Posted June 29, 2011 tom ma invece te stai vendendo il 650d? come mai? Quote Link to comment Share on other sites More sharing options...
tom1 Posted June 30, 2011 Author Share Posted June 30, 2011 eh si leo , per cambio progetto Quote Link to comment Share on other sites More sharing options...
One1ros Posted June 30, 2011 Share Posted June 30, 2011 Tom, vuoi prendere qualcosa di piu' spazioso? Quote Link to comment Share on other sites More sharing options...
tom1 Posted June 30, 2011 Author Share Posted June 30, 2011 Per ora dato che sto aumentando il volume dei miei lavori in camera ho deciso di passare il tutto nel centurion e avere spazio sulla scrivania per il resto con il 24 pollici Quote Link to comment Share on other sites More sharing options...
rookieboy Posted July 3, 2011 Share Posted July 3, 2011 come promesso, qualche foto del mio Obsidian 800D per il bench ssd sata6gbs dovrete aspettare, con il prossimo imminente upgrade al sistema a liquido, che mi obbligherà a ricablare, monterò ancke il kit sata3 Quote Link to comment Share on other sites More sharing options...
tom1 Posted July 3, 2011 Author Share Posted July 3, 2011 ottimo e completo Quote Link to comment Share on other sites More sharing options...
One1ros Posted July 6, 2011 Share Posted July 6, 2011 Bella config, :n2mu: ci vedrei bene anche un bel rheobus Lamptron a gestire ventole e pompa! Quote Link to comment Share on other sites More sharing options...
rookieboy Posted July 6, 2011 Share Posted July 6, 2011 Bella config, :n2mu: ci vedrei bene anche un bel rheobus Lamptron a gestire ventole e pompa! ci avevo pensato, però per adesso ho solo ventole che non superano i 1000giri, a breve ne aggiungerò altre ma sempre a bassi giri (1200rpm). per la pompa, con il prox step, sarà meglio che lavori sempre al max, vista la quantità di wubbi che monterò.... Quote Link to comment Share on other sites More sharing options...
tom1 Posted July 6, 2011 Author Share Posted July 6, 2011 vogolio le foto aggiornate del tuoi acquisti nel 800D Quote Link to comment Share on other sites More sharing options...
rookieboy Posted July 7, 2011 Share Posted July 7, 2011 vogolio le foto aggiornate del tuoi acquisti nel 800D per depistare il mio thread, metto un'anteprima del mio nuovo acquisto.... una volta montato, dalla finestra dell'obsidian sarà uno spettacolo!! Quote Link to comment Share on other sites More sharing options...
maranga Posted July 7, 2011 Share Posted July 7, 2011 belli!!!! sono mips? Quote Link to comment Share on other sites More sharing options...
tom1 Posted July 7, 2011 Author Share Posted July 7, 2011 yess sono mipss presto presto foto foto Quote Link to comment Share on other sites More sharing options...
tom1 Posted July 10, 2011 Author Share Posted July 10, 2011 Aggiungo questo kit upgrade per Obsidian 800D e 700D che permetterà di sfruttare anche le nuovissime USB 3.0 Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.