tom1 Posted January 16, 2011 Share Posted January 16, 2011 (edited) Gigabyte è orgogliosa di presentare la serie di schede madri dedicate al gaming estremo: La serie G1-Killer Edited January 16, 2011 by tom1 Quote Link to comment Share on other sites More sharing options...
tom1 Posted January 16, 2011 Author Share Posted January 16, 2011 (edited) Edited January 16, 2011 by tom1 Quote Link to comment Share on other sites More sharing options...
tom1 Posted January 16, 2011 Author Share Posted January 16, 2011 (edited) La Serie di Gigabyte si compone di 3 modelli G1.Assasins G1.Sniper G1.Guerrilla Differenze Caratteriali dei modelli G1- KIller Edited January 16, 2011 by tom1 Quote Link to comment Share on other sites More sharing options...
tom1 Posted January 16, 2011 Author Share Posted January 16, 2011 (edited) Caratteristiche Serie Edited January 16, 2011 by tom1 Quote Link to comment Share on other sites More sharing options...
tom1 Posted January 16, 2011 Author Share Posted January 16, 2011 (edited) Edited January 16, 2011 by tom1 Quote Link to comment Share on other sites More sharing options...
tom1 Posted January 16, 2011 Author Share Posted January 16, 2011 (edited) G1-Assassin La G1-Assasin è la scheda di punta della serie, con formfactor E-ATX, 4 slot Pci-ex (2 da 16x e 2 da 8x) e 16 fasi di alimentazione per la CPU. G1-Sniper Dotata di heat-pipe sul dissipatore e 2 linee Pci-ex 16x G1-Guerrilla La G1-Guerrila ha un formfactor ATX, 3 slot Pci-ex (uno da 16x e 2 da 8x) e 8 fasi di alimentazione per la CPU. La serie G1-killer di Gigabyte ha delle caratteristiche comuni e cioè: 2 slot pci-ex 1x, 1 Pci, 6 connetori SATA 2 e 2 SATA 3, audio di alta qualità per via del chip Creative X-Fi CA20K2 e gestione della rete per via del processore dedicato Bigfoot Killer E2100 dotato di 1 gb di Ram DDR 3. Inoltre sembra che le vere intenzioni di Gigabyte con l'introduzione sul mercato di queste 3 schede di fascia alta, si pensi che la G1-Assasin potrebbe costare circa 300 €,sia quella di contrastare la serie rinomata di ASUS ed ovvero la serie R.O.G abbreviazione di Repubblic Of Gamers. Edited January 16, 2011 by tom1 Quote Link to comment Share on other sites More sharing options...
tom1 Posted January 16, 2011 Author Share Posted January 16, 2011 (edited) Video [ame=http://www.youtube.com/watch?v=Bobq9L7YfoU]YouTube - CES 2011: Gigabyte Killer G1[/ame] Edited January 16, 2011 by tom1 Quote Link to comment Share on other sites More sharing options...
tom1 Posted January 16, 2011 Author Share Posted January 16, 2011 (edited) GIGABYTE G1 Killer Assassin :D:D:D:D Nuda e Cruda Foto particolare dei condensatori Unboxing La Mobo Profilo Posteriore Socket RAM PCI EXPRESS Porte SATA e Controller Chip di Gestione LAN Edited February 17, 2011 by tom1 Quote Link to comment Share on other sites More sharing options...
tom1 Posted January 16, 2011 Author Share Posted January 16, 2011 (edited) Specifiche Tecniche G1 Assassin CPU Support for an Intel® Core™ i7 series processor in the LGA1366 package ( Go to GIGABYTE's website for the latest CPU support list.) L3 cache varies with CPU QPI 4.8GT/s, 6.4GT/s Chipset North Bridge: Intel® X58 Express Chipset South Bridge: Intel® ICH10R Memory 6 x 1.5V DDR3 DIMM sockets supporting up to 24 GB of system memory* Due to Windows 32-bit operating system limitation, when more than 4 GB of physical memory is installed, the actual memory size displayed will be less than 4 GB. 3/Dual channel memory architecture Support for DDR3 2200/1333/1066/800 MHz memory modules Support for non-ECC memory modules Support for Extreme Memory Profile (XMP) memory modules (Go to GIGABYTE's website for the latest supported memory speeds and memory modules.) Audio 1 x Creative CA20K2 chip High Definition Audio 2/4/5.1/7.1-channel Support for Dolby® Digital Live/DTS Neo:PC/DTS Interactive Support for S/PDIF Out LAN 1 x Bigfoot Killer E2100 chip (10/100/1000 Mbit) 1 x Marvell 88E1118R phy Expansion Slots 2 x PCI Express x16 slots, running at x16 (PCIEX16_1, PCIEX16_2)* For optimum performance, if only one PCI Express graphics card is to be installed, be sure to install it in the PCIEX16_1 slot; if you are installing two PCI Express graphics cards, it is recommended that you install them in the PCIEX16_1 and PCIEX16_2 slots. 2 x PCI Express x16 slots, running at x8 (PCIEX8_1, PCIEX8_2)* The PCIEX8_1 slot shares bandwidth with the PCIEX16_1 slot and the PCIEX8_2 slot with PCIEX16_2. The PCIEX16_1/PCIEX16_2 slot will operate at up to x8 mode when the PCIEX8_1/PCIEX8_2 is populated.(The PCIEX16_1, PCIEX16_2, PCIEX8_1, and PCIEX8_2 slots conform to PCI Express 2.0 standard.) 2 x PCI Express x1 slots 1 x PCI slot Multi-Graphics Technology Support for 3-Way/2-Way NVIDIA SLI technology and 4-Way/3-Way/2-Way ATI CrossFireX™ technology Storage InterfaceSouth Bridge: 6 x SATA 3Gb/s connectors (SATA2_0~SATA2_5) supporting up to 6 SATA 3Gb/s devices Support for SATA RAID 0, RAID 1, RAID 5, and RAID 10 Marvell 88SE9182: 2 x SATA 6Gb/s connectors (GSATA3_6, GSATA3_7) supporting up to 2 SATA 6Gb/s devices Support for SATA RAID 0 and RAID 1 USBSouth Bridge: Up to 8 USB 2.0/1.1 ports (4 on the back panel, 4 via the USB brackets connected to the internal USB headers) 1 x Renesas D720200 chip and 2 x VLI VL810 hubs: Up to 8 USB 3.0/2.0 ports (4 on the back panel, 4 via the USB brackets connected to the internal USB headers)* The USB 2.0 signals of the USB 3.0/2.0 ports are from the South Bridge. Internal I/O Connectors 1 x 24-pin ATX main power connector 2 x 8-pin ATX 12V power connectors 2 x 4-pin PCIe 12V power connectors 2 x SATA 6Gb/s connectors 6 x SATA 3Gb/s connectors 1 x CPU fan header 1 x system fan header 3 x fan headers 1 x front panel header 1 x front panel audio header 1 x S/PDIF Out header 2 x USB 2.0/1.1 headers 2 x USB 3.0/2.0 headers 1 x clearing CMOS jumper 1 x Quick Boost button header 1 x heatsink LED power connector Back Panel Connectors 1 x PS/2 keyboard port 1 x PS/2 mouse port 1 x optical S/PDIF Out connector 1 x coaxial S/PDIF Out connector 4 x USB 2.0/1.1 ports 4 x USB 3.0/2.0 ports 1 x RJ-45 port 5 x audio jacks (Center/Subwoofer Speaker Out, Rear Speaker Out, Side Speaker Out, Line In/Mic In, Line Out) I/O Controller iTE IT8720 chip H/W Monitoring System voltage detection CPU/System temperature detection CPU/System fan speed detection CPU overheating warning CPU/System fan fail warning CPU/System fan speed control* Whether the CPU/system fan speed control function is supported will depend on the CPU/system cooler you install. BIOS 2 x 16 Mbit flash Use of licensed AWARD BIOS Support for DualBIOS ™ PnP 1.0a, DMI 2.0, SM BIOS 2.4, ACPI 1.0b Unique Features Support for @BIOS Support for Q-Flash Support for Xpress BIOS Rescue Support for Download Center Support for Xpress Install Support for Xpress Recovery2 Support for EasyTune* Available functions in EasyTune may differ by motherboard model. Support for Dynamic Energy Saver ™ 2 Support for Smart 6™ Support for Auto Green Support for eXtreme Hard Drive (X.H.D) Support for ON/OFF Charge Support for Cloud OC Support for Q-Share Bundle Software Norton Internet Security (OEM version) Operating System Support for Microsoft® Windows® 7/Vista/XP Form Factor XL-ATX Form Factor; 34.5cm x 26.3cm Remark Due to different Linux support condition provided by chipset vendors, please download Linux driver from chipset vendors' website or 3rd party website. Most hardware/software vendors no longer offer support for Win9X/ME/2000/XP SP1/SP2. If drivers are available from the vendors, we will update them on the GIGABYTE website. BIOS F1 http://download.gigabyte.eu/FileList/BIOS/mb_bios_g1.assassin_f1.exe F2 http://download.gigabyte.eu/FileList/BIOS/mb_bios_g1.assassin_f2.exe Lista Case Supportati http://download.gigabyte.eu/FileList/Chassis/Chassis-Support-List.pdf Driver GIGABYTE - Motherboard - Socket 1366 - G1.Assassin (rev. 1.0) Edited February 20, 2011 by tom1 Quote Link to comment Share on other sites More sharing options...
tom1 Posted January 16, 2011 Author Share Posted January 16, 2011 Riservato 9 Quote Link to comment Share on other sites More sharing options...
tom1 Posted January 16, 2011 Author Share Posted January 16, 2011 Riservato 10 Quote Link to comment Share on other sites More sharing options...
tom1 Posted January 16, 2011 Author Share Posted January 16, 2011 Riservato 11 Quote Link to comment Share on other sites More sharing options...
tom1 Posted January 16, 2011 Author Share Posted January 16, 2011 Riservato 12 Quote Link to comment Share on other sites More sharing options...
tom1 Posted January 16, 2011 Author Share Posted January 16, 2011 Riservato 13 Quote Link to comment Share on other sites More sharing options...
tom1 Posted January 16, 2011 Author Share Posted January 16, 2011 Riservato 14 Quote Link to comment Share on other sites More sharing options...
tom1 Posted January 16, 2011 Author Share Posted January 16, 2011 Riservato 15 Quote Link to comment Share on other sites More sharing options...
Le085 Posted January 18, 2011 Share Posted January 18, 2011 Belle queste schede! peccato siano arrivate cosi' tardi.. speriamo le introducano anche per le nuove piattaforme sandy bridge! Quote Link to comment Share on other sites More sharing options...
tom1 Posted January 18, 2011 Author Share Posted January 18, 2011 Sicuramente , a breve ci saranno ottimi aggiornamenti Quote Link to comment Share on other sites More sharing options...
tom1 Posted February 17, 2011 Author Share Posted February 17, 2011 Nuove Foto per il Modello G1 Assassin Quote Link to comment Share on other sites More sharing options...
Devil_Mcry Posted February 17, 2011 Share Posted February 17, 2011 belle davvero spero faranno qualcosa per 2011 o 1155 Quote Link to comment Share on other sites More sharing options...
tom1 Posted February 17, 2011 Author Share Posted February 17, 2011 Dubito Ivan, già sta uscendo troppo tardi questa serie di Gigabyte Quote Link to comment Share on other sites More sharing options...
tom1 Posted February 20, 2011 Author Share Posted February 20, 2011 Specifiche - Bios - G1 assasin aggiunti Quote Link to comment Share on other sites More sharing options...
DLz Posted February 1, 2013 Share Posted February 1, 2013 Salve a tutti! Sto per acquistare una gigabyte g1 sniper lga 1366, ho alcuni dubbi: io attualmente posseggo una x58a-ud3r rev.2.0 con 12 fasi, e 920D0 @4.00GHz, pensate che le 8 fasi della sniper, siano sufficienti? So che la qualità costruttiva è più importante e so che è buona, ma la mia domanda è: anche se sono fatte bene, queste 8 fasi, sono sufficienti? Consedarando che passerò a liquido, e quindi salirò un altro po', andranno ancora bene? Grazie! Quote Link to comment Share on other sites More sharing options...
Le085 Posted February 1, 2013 Share Posted February 1, 2013 si si non dovresti aver problemi Quote Link to comment Share on other sites More sharing options...
DLz Posted February 1, 2013 Share Posted February 1, 2013 Ok, grazie per la risposta! Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.