pirus ha scritto:

problema alla centrale, ora va!

Perfetto,ogni tanto fanno i fetenti

pirus ha scritto:

Ok tienici informati

Mi hanno attivato stamattina alice 20 mega!

ho configurato cosi il router WAG320N in questione!

Ho provato sia con rilevamento automatico on e off!

ma la passante la becca al volo (supero i 18000 sulla spina principale) ma quando quando va a connettersi il mondo di internet diventa rosso e dopo 30 secondi si disconnette il led della portante e va in loop! portante attiva, led rosso di internet!

Ho chiamato alla telecom e per loro è tutto ok e addirittura vedono il router collegato!

Ho l'ultimo firmware, che potrebbe essere???

ecco i parametri!

--- System Information ---

Vendor: Linksys

ModelName: WAG320N

Firmware Version: 1.00.12 , 2010-03-22T10:51:43

Boot Version: 1.06

Hardware Version: 0.01

--- DSL Information ---

DSL Driver Version: AnnexA version - A2pB023k.d21d

DSL VPI/VCI: 8/35

DSL Status: Showtime

DSL Mode: ADSL2+

DSL Channel:

DSL Upstream Rate: 786 Kbps

DSL Downstream Rate: 16995 Kbps

Down up

DSL Noise Margin: 12.3 dB 13.5 dB

DSL Attenuation: 18.0 dB 3.1 dB

DSL Transmit Power: 1.3 dBm 4.6 dBm

--- Wireless Information ---

Wireless Driver Version: 5.10.85.0.cpe4.402.4

Wireless Status: Enabled

Wireless Wide Channel: 9

Wireless Standard Channel: 11- 2,462 GHz

Wireless SSID: linksys

--- Dynamic Information ---

LAN Mac Address: 00:25:9C:82:11:5A

WAN Mac Address: 00:25:9C:82:11:5C

Wireless Mac Address: 00:25:9C:82:11:5B

---

ed ecco l'errore

Sat, 2000-01-01 00:00:22 - ioctl(s, SIOCGIFADDR, ...): No such device

Sat, 2000-01-01 00:00:22 - Failed to get ip address for interface ppp0

Sat, 2000-01-01 00:00:51 - atm_backend_br2684_22 = 2-----ret_22 = 0

Sat, 2000-01-01 00:00:51 - Interface "nas0" created sucessfully

Sat, 2000-01-01 00:00:51 - Communicating over ATM 0.8.35, encapsulation: LLC

Sat, 2000-01-01 00:00:51 - Initialize LCP.

Sat, 2000-01-01 00:00:51 - Plugin pppoe loaded.

Sat, 2000-01-01 00:00:51 - PPPoE Plugin Initialized

Sat, 2000-01-01 00:00:51 - Plugin pppoe called.

Sat, 2000-01-01 00:00:51 - Enter: tdb_store.

Sat, 2000-01-01 00:00:51 - tdb_store: calling tdb_update.

Sat, 2000-01-01 00:00:51 - Enter: tdb_update.

Sat, 2000-01-01 00:00:51 - pppd 2.4.1 started by root, uid 0

Sat, 2000-01-01 00:00:51 - Enter: tdb_store.

Sat, 2000-01-01 00:00:51 - tdb_store: calling tdb_update.

Sat, 2000-01-01 00:00:51 - Enter: tdb_update.

Sat, 2000-01-01 00:00:51 - Enter: tdb_store.

Sat, 2000-01-01 00:00:51 - tdb_store: calling tdb_update.

Sat, 2000-01-01 00:00:51 - Enter: tdb_update.

Sat, 2000-01-01 00:00:51 - Enter: tdb_store.

Sat, 2000-01-01 00:00:51 - tdb_store: calling tdb_update.

Sat, 2000-01-01 00:00:51 - Enter: tdb_update.

Sat, 2000-01-01 00:00:51 - Enter: tdb_store.

Sat, 2000-01-01 00:00:51 - tdb_store: calling tdb_update.

Sat, 2000-01-01 00:00:51 - Enter: tdb_update.

Sat, 2000-01-01 00:00:51 - Enter: tdb_store.

Sat, 2000-01-01 00:00:51 - tdb_store: calling tdb_update.

Sat, 2000-01-01 00:00:51 - Enter: tdb_update.

Sat, 2000-01-01 00:00:51 - Sending PADI

Sat, 2000-01-01 00:00:52 - Sending PADI 1...

Sat, 2000-01-01 00:00:54 - Sending PADI 2...

Sat, 2000-01-01 00:00:58 - Sending PADI 3...

Sat, 2000-01-01 00:01:06 - Sending PADI 4...

Sat, 2000-01-01 00:01:22 - Restart adsl...

Sat, 2000-01-01 00:01:23 - Connecting PPPoE socket: 00:00:00:00:00:00 0000 0x1004e180

Sat, 2000-01-01 00:01:23 - Couldn't get channel number: Transport endpoint is not connected

Sat, 2000-01-01 00:01:23 - Doing disconnect

Sat, 2000-01-01 00:01:23 - sendto returned:

Sat, 2000-01-01 00:01:23 - Exit.

Non so più che fare... ho provato su tutte le spine di casa, su quella principale raggiungo i 19000, per la telecom è tutto ok!

Help me!