Jump to content

[Thread Ufficiale] ATI Cypress - Radeon HD 5870/5970


dj883u2

Recommended Posts

  • Replies 2.6k
  • Created
  • Last Reply

Top Posters In This Topic

uscita la versione 2.0.0 Finale di MSI AfterBurner... O0

 

Migliorie:


  • Voltage control layer has been seriously revamped to give additional freedom to extreme overclockers with new custom design MSI graphics cards. Now MSI Afterburner is able to control up to 3 voltages on custom design MSI Fermi and other future custom design MSI graphics cards. New adjustable voltages include memory voltage and special multi-purpose auxiliary voltage feeding either memory bus (also known as VDDCI on AMD graphics cards) or PCIE bus and crystal (PEXVDD on NVIDIA graphics cards)
  • Added core, memory and auxiliary PEXVDD voltage control for custom design MSI N480GTX Lighning series graphics cards with uP6225+uP6262 voltage regulators
  • Added core, memory and auxiliary PEXVDD voltage control for custom design MSI N470GTX Twin Frozr II OV3 series graphics cards with uP6218+uP6262 voltage regulators
  • Added core, memory and auxiliary PEXVDD voltage control for custom design MSI N460GTX Hawk series graphics cards with uP6262 voltage regulators
  • Added core voltage control for custom design MSI N460GTX Cyclone series graphics cards
  • Added auxiliary VDDCI voltage control for reference design AMD RADEON HD 5870 series graphics cards
  • Added fan tachometer monitoring for NVIDIA graphics cards. Please take a note that not all graphics cards are tachometer reading capable. So depending on graphics card and cooling system fan tachometer monitoring can be unavailable
  • Optimized NVIDIA driver-level clock frequency monitoring codepath
  • Minimum clock limits for all graphics cards have been reduced from 75% to 50%
  • Dynamic overclocking, voltage and fan speed limits. MSI Afterburner no longer uses static slider limits calibration and adjusts the limits dynamically when some external factors affect it (e.g. Overdrive clock limits on AMD cards or VGA BIOS fan speed and voltage limits on NVIDIA GeForce GTX 400 cards)
  • New temperature hysteresis settings for software automatic fan control mode gives you additional way to improve cooling system thermal and acoustic parameters
  • Now fan speed limits (i.e. minimum and maximum fan speeds accepted by VGA BIOS and display driver) are displayed in custom fan speed curve editor window
  • Built-in skin sizes have been reduced due to optimized internal skin panels representation and optimized compiled bitmap cache
  • Optional skin compression ability in the built-in skin compiler. Skin format reference documentation has been updated to document new compression options
  • Minor built-in skins appearance tweaks
  • Now MSI Afterburner uses previously undocumented power user oriented startup mode via the task scheduler under Windows Vista / Windows 7. MSI Afterburner launch no longer requires UAC confirmation at Windows startup. Please take a note that Microsoft Visual C++ 2008 runtime libraries must be installed to get new startup mode working
  • Now MSI Afterburner automatically fixes startup link if or is enabled but the registry or task scheduler startup entry is missing
  • Startup profile is now displayed in option floating tooltip instead of the main window
  • Now power users can enable optional DirectInput based hotkeys handler via the configuration file. DirectInput based hotkeys processing can seriously reduces hotkey response time in the applications heavily loading CPU (mostly 3D games) and leaving not enough time for processing standard keyboard input message queues. Please take a note that enabling such sophisticated hotkeys handling mode can cause some system security applications (e.g. pro-active application behavior analysis module of KIS) to warn you about possible keylogging threat
  • Improved skin engine, now skinned controls support horizontal and/or vertical centering. Skin format reference guide has been updated to document these new alignment modes
  • MSI On-Screen Display server has been upgraded to version 3.7.2. New version gives you the following improvements:
  • Now screen capture events are identified visually by text message flashing in On-Screen Display during 0.25s
  • Built-in skin sizes have been reduced due to optimized compiled bitmap cache
  • Added On-Screen Display profile for Startcraft II : Wings of Liberty
  • Added configuration file switch allowing sending MSI Afterburner to system tray instead of closing on button click
  • option is no longer set in the startup task settings to allow automatically starting application via the task scheduler on laptops or on some UPS models
  • Added optional data filtering mode for all hardware monitoring graphs. Now it is possible to enable special math data filtering algorithm independently for each hardware monitoring graph to reject misreading spikes caused by sensor access conflicts when running multiple hardware monitoring tools at the same time
  • Now it is posssible to use both core and shader clock as the primary clock when adjust the clocks in linked mode
  • Fixed videomemory usage monitoring for non-primary NVIDIA graphics cards
  • Application restart is no longer required to apply new user interface language
  • Updated localization engine. Now floating tooltips based context help system supports macro definitions
  • Localization reference guide documentation has been updated to v1.1
  • Various typo fixes in different language packs
  • Added Korean localization

LINK DOWNLOAD

 

O0

Link to comment
Share on other sites

Ciao ragazzi ho un problema, per i bench con la vga sono a 1000 di gpu e 1200 di mem!

chiudo i 3 minuti di furmark multigpu con le gpu a 1000mhz e 1,200v da msi afterburner senza errore (poi ho stoppato tanto mi serve solo per i 3dmark quindi non mi interessa fare piu di 3 minuti)!

 

ho ancora margine da 1,200 a 1,300V sulla gpu, (che sono credo 8 step di vcore) ma sono arrivato a fondoscala!

 

Come faccio ad andare oltre i 1000mhz?

che software devo usare!!!!

qualcuno può aiutarmi?

Link to comment
Share on other sites

Come faccio ad andare oltre i 1000mhz?

che software devo usare!!!!

qualcuno può aiutarmi?

 

ciao Nick...allora...puoi scaricare Radeon Bios Editor (RBE) e semplicemente aumentare i limiti gpu/mem da li...è davvero facile...poi salvi tutto e flashi... :)

i64328_rbe.jpg

 

LINK DOWNLOAD RBE

 

oppure puoi postare il tuo bios qua...e te lo modifico io...

http://www.xtremehardware.com/forum/f14/thread_ufficiale_ati_radeon_hd_5000_series_bios_upload_mod-20151/

 

come vuoi... O0

Link to comment
Share on other sites

ciao Nick...allora...puoi scaricare Radeon Bios Editor (RBE) e semplicemente aumentare i limiti gpu/mem da li...è davvero facile...poi salvi tutto e flashi... :)

 

edit foto...

 

LINK DOWNLOAD RBE

 

oppure puoi postare il tuo bios qua...e te lo modifico io...

http://www.xtremehardware.com/forum/f14/thread_ufficiale_ati_radeon_hd_5000_series_bios_upload_mod-20151/

 

come vuoi... O0

 

 

Grazie Luca, ma cercavo una tecnica "meno invasiva" sai col culo che ho ultimamente c'e il rischio che faccia anche danno durante il flash!!!

 

vorrei evitare di arrivare al cambio bios!!!

che tu sappia non c'e un software o roba del genere che mi permetta di farlo?

 

io ho anche modificato la voce "enableunofficalovercloccking" dal config di msi, ma mi si inchioda la macchina subito appena apro msi! probabilmente per questa scheda questo sistema non va!!!

Link to comment
Share on other sites

cmq non avere paura a flashare...difficile far danni...al max qualche noia se ti va via la luce durante il flash...ma si può sempre riflashare senza problemi...avviando con qualsiasi altra vga pci-e/pci in modo da vedere l'immagine a schermo...oppure anche senza volendo...ma si fa un pelino più difficile per chi non è abituato a farlo... :)

Link to comment
Share on other sites

cmq non avere paura a flashare...difficile far danni...al max qualche noia se ti va via la luce durante il flash...ma si può sempre riflashare senza problemi...avviando con qualsiasi altra vga pci-e/pci in modo da vedere l'immagine a schermo...oppure anche senza volendo...ma si fa un pelino più difficile per chi non è abituato a farlo... :)

 

 

ok dai allora con calma provo nel week end!

mal che vada se faccio danno chiedo aiuto a te che vedo che ne sai parecchio!!!

 

cmq secondo te 1000mhz con 1,2000 come è tu che l'hai avuta sta scheda?

Link to comment
Share on other sites

uscita la versione 2.0.0 Finale di MSI AfterBurner... O0

 

Migliorie:


  • Voltage control layer has been seriously revamped to give additional freedom to extreme overclockers with new custom design MSI graphics cards. Now MSI Afterburner is able to control up to 3 voltages on custom design MSI Fermi and other future custom design MSI graphics cards. New adjustable voltages include memory voltage and special multi-purpose auxiliary voltage feeding either memory bus (also known as VDDCI on AMD graphics cards) or PCIE bus and crystal (PEXVDD on NVIDIA graphics cards)
  • Added core, memory and auxiliary PEXVDD voltage control for custom design MSI N480GTX Lighning series graphics cards with uP6225+uP6262 voltage regulators
  • Added core, memory and auxiliary PEXVDD voltage control for custom design MSI N470GTX Twin Frozr II OV3 series graphics cards with uP6218+uP6262 voltage regulators
  • Added core, memory and auxiliary PEXVDD voltage control for custom design MSI N460GTX Hawk series graphics cards with uP6262 voltage regulators
  • Added core voltage control for custom design MSI N460GTX Cyclone series graphics cards
  • Added auxiliary VDDCI voltage control for reference design AMD RADEON HD 5870 series graphics cards
  • Added fan tachometer monitoring for NVIDIA graphics cards. Please take a note that not all graphics cards are tachometer reading capable. So depending on graphics card and cooling system fan tachometer monitoring can be unavailable
  • Optimized NVIDIA driver-level clock frequency monitoring codepath
  • Minimum clock limits for all graphics cards have been reduced from 75% to 50%
  • Dynamic overclocking, voltage and fan speed limits. MSI Afterburner no longer uses static slider limits calibration and adjusts the limits dynamically when some external factors affect it (e.g. Overdrive clock limits on AMD cards or VGA BIOS fan speed and voltage limits on NVIDIA GeForce GTX 400 cards)
  • New temperature hysteresis settings for software automatic fan control mode gives you additional way to improve cooling system thermal and acoustic parameters
  • Now fan speed limits (i.e. minimum and maximum fan speeds accepted by VGA BIOS and display driver) are displayed in custom fan speed curve editor window
  • Built-in skin sizes have been reduced due to optimized internal skin panels representation and optimized compiled bitmap cache
  • Optional skin compression ability in the built-in skin compiler. Skin format reference documentation has been updated to document new compression options
  • Minor built-in skins appearance tweaks
  • Now MSI Afterburner uses previously undocumented power user oriented startup mode via the task scheduler under Windows Vista / Windows 7. MSI Afterburner launch no longer requires UAC confirmation at Windows startup. Please take a note that Microsoft Visual C++ 2008 runtime libraries must be installed to get new startup mode working
  • Now MSI Afterburner automatically fixes startup link if or is enabled but the registry or task scheduler startup entry is missing
  • Startup profile is now displayed in option floating tooltip instead of the main window
  • Now power users can enable optional DirectInput based hotkeys handler via the configuration file. DirectInput based hotkeys processing can seriously reduces hotkey response time in the applications heavily loading CPU (mostly 3D games) and leaving not enough time for processing standard keyboard input message queues. Please take a note that enabling such sophisticated hotkeys handling mode can cause some system security applications (e.g. pro-active application behavior analysis module of KIS) to warn you about possible keylogging threat
  • Improved skin engine, now skinned controls support horizontal and/or vertical centering. Skin format reference guide has been updated to document these new alignment modes
  • MSI On-Screen Display server has been upgraded to version 3.7.2. New version gives you the following improvements:
  • Now screen capture events are identified visually by text message flashing in On-Screen Display during 0.25s
  • Built-in skin sizes have been reduced due to optimized compiled bitmap cache
  • Added On-Screen Display profile for Startcraft II : Wings of Liberty
  • Added configuration file switch allowing sending MSI Afterburner to system tray instead of closing on button click
  • option is no longer set in the startup task settings to allow automatically starting application via the task scheduler on laptops or on some UPS models
  • Added optional data filtering mode for all hardware monitoring graphs. Now it is possible to enable special math data filtering algorithm independently for each hardware monitoring graph to reject misreading spikes caused by sensor access conflicts when running multiple hardware monitoring tools at the same time
  • Now it is posssible to use both core and shader clock as the primary clock when adjust the clocks in linked mode
  • Fixed videomemory usage monitoring for non-primary NVIDIA graphics cards
  • Application restart is no longer required to apply new user interface language
  • Updated localization engine. Now floating tooltips based context help system supports macro definitions
  • Localization reference guide documentation has been updated to v1.1
  • Various typo fixes in different language packs
  • Added Korean localization

LINK DOWNLOAD

 

O0

Grazie, forse con questo in Crysis i dati in tempo reale si vedono ...

 

http://event.msi.com/vga/afterburner/download.htm

Link to comment
Share on other sites

direi veramente molto buono...ottima scheda la tua Sapphire...O0

 

 

beh questo mi fa piacere proprio tanto!!!! vorrei benchare a piu di 1000 perchè avendo ancora tutti sti step di voltaggio la scheda secondo me sale, poi è a liquido e in full prende 45° sulla gpu se la tengo a 1000mhz!

Link to comment
Share on other sites

beh questo mi fa piacere proprio tanto!!!! vorrei benchare a piu di 1000 perchè avendo ancora tutti sti step di voltaggio la scheda secondo me sale, poi è a liquido e in full prende 45° sulla gpu se la tengo a 1000mhz!

 

Che spettacolo leggere ste cose.. mi viene voglia di liquidare pure l'alimentatore :asd:O0

Link to comment
Share on other sites

DC hai provato GTA IV EPISODES? ....:fiufiu:

 

Ciao Gian, ho un po di problemi con le ram sto aspettando di risolvere.. mi prendo in sostituzione 2 ssd intel da mettere in raid poi ri-installo tutto GTA IV compreso e ti dico come gira.. spero di risolvere il tutto questa settimana O0

Addio Blade.. :cry:

Link to comment
Share on other sites

Ciao Gian, ho un po di problemi con le ram sto aspettando di risolvere.. mi prendo in sostituzione 2 ssd intel da mettere in raid poi ri-installo tutto GTA IV compreso e ti dico come gira.. spero di risolvere il tutto questa settimana O0

Addio Blade.. :cry:

 

Mi spiace...spero risolvi presto e bene...:)

Attendo impaziente...O0

Link to comment
Share on other sites

Nemesis89;237273']Gian B. il gioco mi e arrivato oggi... pero non mi fa cambiare risoluzione mi rimane a 800x600 qui ho chiesto aiuto ma nessuno ha mai visto sto fatto assurdo..

 

[Thread Ufficiale] Grand Theft Auto IV & Episodes - Pagina 1282 - Hardware Upgrade Forum

 

Senza parole.. se è così non penso sia un caso :muro:

Disdico l'ordine, anzi non lo prendo proprio.. già non me ne va bene una poi se ci si mette pure il gioco.. :umorenero:

Link to comment
Share on other sites

Nemesis89;237273']Gian B. il gioco mi e arrivato oggi... pero non mi fa cambiare risoluzione mi rimane a 800x600 qui ho chiesto aiuto ma nessuno ha mai visto sto fatto assurdo..

 

[Thread Ufficiale] Grand Theft Auto IV & Episodes - Pagina 1282 - Hardware Upgrade Forum

 

Ecco te pareva....:muro::muro::muro:

Occorre scrivere alla Rockstar o guardare nella confezione e chiamare il supporto tecnico per segnalare il problema.....ma dico io possibile che non lo sappiano ancora e che non abbiano fatto uscire un minimo di patch???!!!! :angry::mad::cry:

Io comunque chiamero` il numero di telefono del supporto per segnalarlo. Fatelo anche Voi!

Link to comment
Share on other sites

@Gian B

 

ho risolto, ora posso cambiare impostazioni grafiche,disabilita il crossfirex ma ci sono altri problemi il gioco e pieno zeppo di bug mai visti i grattacieli lampeggiano le strade diventano tutte nere i pedoni volano blu screen ecc.. disinstallato e lanciato fuori dalla finestra 20€ piu spese di spedizione buttati al vento complimenti rockstargames.

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.


×
×
  • Create New...