Jump to content

Dfi INFINITY NF ULTRAII-M2 che senso ha ?


megthebest

Recommended Posts

volevo porre all'attenzione la nuova mobo dfi (e la prima :muro:) per socket am2 ...

 

infultraii.jpg

 

 

il link diretto :

http://us.dfi.com.tw/Product/xx_product_spec_details_r_us.jsp?PRODUCT_ID=4755&CATEGORY_TYPE=INFINITY&SITE=US

 

Specification

CPU

 

# AMD Athlon 64 X2 / Athlon 64 FX / Athlon 64 / Sempron

# Socket AM2

 

HyperTransport

# 2000MT/s HyperTransport interface

 

Chipset

 

# NVIDIA nForce4 Ultra

 

System Memory

 

# Four 240-pin DDR2 DIMM sockets

# Supports DDR2 533 and DDR2 667 DIMMs

# Supports dual channel (128-bit wide) memory interface

# Supports up to 4GB system memory

 

Expansion Slots

 

# 2 PCI Express x16 slots - PCIE1 slot operates at x16 or x8 bandwidth. - PCIE3 slot operates at x2.

# 1 PCI Express x1 slot

# 3 PCI slots

 

BIOS

 

# Award BIOS

# CPU/DRAM overclocking

# CPU/DRAM/Chipset overvoltage

# 4Mbit flash memory

 

Power Management

 

# ACPI STR (Suspend to RAM) function

# Wake-On-PS/2 Keyboard/Mouse

# Wake-On-USB Keyboard/Mouse

# Wake-On-LAN

# Wake-On-Ring

# RTC timer to power-on the system

# AC power failure recovery

 

Hardware Monitor

 

# Monitors CPU/system/chipset temperature

# Monitors 12V/5V/3.3V/Vcore/Vbat/5Vsb/Vdimm/Vchip voltages

# Monitors the speed of the cooling fans

# CPU Overheat Protection function monitors CPU temperature during system boot-up

 

Audio

 

# Realtek ALC850 8-channel AC’97 audio CODEC

# S/PDIF-in/out interface

 

LAN

 

# Marvell 88E1115 Gigabit LAN

# Fully compliant to IEEE 802.3 (10BASE-T), 802.3u (100BASE-TX) and 802.3ab (1000BASE-T) standards

 

IDE

 

# Supports two IDE connectors that allow connecting up to four UltraDMA 133Mbps hard drives

# NVIDIA RAID allows RAID arrays spanning across Serial ATA and Parallel ATA

# RAID 0, RAID 1, RAID 0+1 and JBOD

 

Serial ATA with RAID

 

# Four Serial ATA ports

# SATA speed up to 3Gb/s

# NVIDIA RAID allows RAID arrays spanning across Serial ATA and Parallel ATA

# RAID 0, RAID 1, RAID 0+1 and JBOD

 

IEEE 1394

 

# VIA VT6307

# Supports two 100/200/400 Mb/sec ports

 

Rear Panel I/O

 

# 1 mini-DIN-6 PS/2 mouse port

# 1 mini-DIN-6 PS/2 keyboard port

# 1 optical S/PDIF-out

# 1 RCA S/PDIF-out

# 1 parallel port

# 1 COM port

# 1 IEEE 1394 port

# 1 RJ45 LAN port

# 4 USB 2.0/1.1 ports

# Center/subwoofer, rear R/L and side R/L jacks

# Line-in, line-out (front R/L) and mic-in jacks

 

Internal I/O

 

# 3 connectors for 6 additional external USB 2.0/1.1 ports

# 1 connector for 1 external IEEE 1394 port

# 1 front audio connector for external line-out and mic-in jacks

# 1 CD-in internal audio connector

# 1 S/PDIF connector for optical cable connection

# 1 IrDA connector

# 4 Serial ATA connectors

# 2 IDE connectors

# 1 90 floppy connector

# 1 24-pin ATX power connector

# 1 4-pin ATX 12V power connector

# 1 4-pin 5V/12V power connector (FDD type)

# 1 front panel connector

# 5 fan connectors

# EZ touch switches (power switch and reset switch)

 

ORA

mi chiedo perchè dotarla dell'nf4 ormai obsoleto ?

 

nn vi sembra che il pcb sia troppo retrò /anonimo ?

nn è che dfi dopo il successo delle piattaforme 939 , stia abbandonando amd , e punti tutto su intel ??

commenti e info + dettagliate sono molto apprezzate ...

 

ciao

max

Link to comment
Share on other sites

anche la infinity per 939 era retrò ed anonima..... la serie infinity è per chi vuole un prodotto un pò migliore della media puntando al risparmio.

 

Per il resto... c'è da vedere.

DFI fa mobo per smanettoni.

Se gli smanettoni (grazie a conroe) andranno verso intel.... anche dfi (per quanto riguarda almeno le mobo top di gamma) deve andare verso intel..... se puntasse verso AMD sarebbe una mossa suicida.

Link to comment
Share on other sites

Quoto con quanto detto.

 

Visto che ormai la maggior parte degli smanettoni sta andando verso architettura Intel Conroe, anche DFI presumibilmente si muoverà verso Intel. Al momento non ha senso costruire una macchina al top (chi compra DFI non lo fa per stare a settaggi default e per abbinargli componentistica "scarsa") utilizzando i processori attuali AMD. Orientandosi verso Intel a parità di spesa si ha un'architettura molto più prestante.

 

Ciao

Link to comment
Share on other sites

ricordo ancora i tempi della infinity con nf2 non aveva tutti gli accessori della lanparty ma andava che era una meraviglia :)

anche questa scheda madre per am2, pertanto avrà delle buone caratteristiche, non come la sorella maggiore, ma chiaramente costerà di meno :)

 

Gianni

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

×
×
  • Create New...